采用套索驱动的手部助力外骨骼设计与抓握实验研究

宋纪元; 朱爱斌; 张晶; 郑春莉; 屠尧; 黄虎; 张政; 徐海波

doi:10.7652/xjtuxb202308012

您当前的位置：

首页 >

文章列表页 >

采用套索驱动的手部助力外骨骼设计与抓握实验研究

智能制造 | 更新时间：2025-05-08

- 采用套索驱动的手部助力外骨骼设计与抓握实验研究
- Novel Design and Grasping Experiment of a Hand-Assisted Exoskeleton Driven by Tendon-Sheath Actuator
- 西安交通大学学报 2023年57卷第8期页码：115-126
- 作者机构：
  
  1. 西安交通大学机器人与智能系统研究所,西安,710049
  2. 西安交通大学陕西省智能机器人重点实验室,西安,710049
  3. 西安交通大学现代设计及转子轴承系统教育部重点实验室,西安,710049
  4. 西安交通大学环境科学与工程系,西安,710049
- 作者简介：
  
  : 2022-12-23。作者简介: 宋纪元(1993—),男,博士生
  朱爱斌(通信作者),男,教授,博士生导师。基金项目: 国家自然科学基金资助项目(52175061)
- 基金信息：
  
  : 2022-12-23。作者简介: 宋纪元(1993—),男,博士生;朱爱斌(通信作者),男,教授,博士生导师。基金项目: 国家自然科学基金资助项目(52175061);新疆自治区重大科技专项资助项目(2021A02002);陕西省重点研发计划资助项目(2022SF-355)。
- DOI：10.7652/xjtuxb202308012
  中图分类号： TH117.1
- 网络首发：2023-08-10，
  
  纸质出版：2023
- 稿件说明：
移动端阅览
宋纪元, 朱爱斌, 张晶, 等. 采用套索驱动的手部助力外骨骼设计与抓握实验研究[J]. 西安交通大学学报, 2023,57(8):115-126.

SONG Jiyuan, ZHU Aibin, ZHANG Jing, et al. Novel Design and Grasping Experiment of a Hand-Assisted Exoskeleton Driven by Tendon-Sheath Actuator[J]. 2023, 57(8): 115-126.
宋纪元, 朱爱斌, 张晶, 等. 采用套索驱动的手部助力外骨骼设计与抓握实验研究[J]. 西安交通大学学报, 2023,57(8):115-126. DOI： 10.7652/xjtuxb202308012.

SONG Jiyuan, ZHU Aibin, ZHANG Jing, et al. Novel Design and Grasping Experiment of a Hand-Assisted Exoskeleton Driven by Tendon-Sheath Actuator[J]. 2023, 57(8): 115-126. DOI： 10.7652/xjtuxb202308012.

摘要

针对航天和工业领域中人体佩戴手套执行任务时

手指关节处因受到编织物挤压而造成的手部疲劳损伤以及抓握力下降等问题

设计了一种采用套索驱动的手部助力外骨骼系统。该系统采用以速度为内环、力为外环的力PID控制方法

以拉力传感器反馈输出力

通过力学建模对手部助力外骨骼导线槽开展位置优化。对所设计的外骨骼系统开展抓握实验

结果表明:人体穿戴手部助力外骨骼可再现Feix分类法中全部33种抓握类型; 外骨骼抓握指尖力最高可达14 N; 与不穿戴外骨骼相比

穿戴外骨骼时人体手指关节运动范围能够达到自主弯曲运动范围的63%以上

掌指关节、近端指间关节和大拇指的指间关节角度的皮尔森相关系数可达0.90以上; 外骨骼助力抓握使得肱桡肌和桡侧腕长伸肌的肌电均方根峰值分别减小了37.86%和62.46%。实验结果证明所设计的手部助力外骨骼能够明显减少手部肌肉耗能。

Abstract

A hand-assisted exoskeleton system driven by a tendon-sheath actuator is designed to address the problem that

in the aerospace and industrial fields

fatigue damage to hands is caused and grasp strength is reduced

when personnel wear gloves to perform tasks

as finger joints are subject to the glove woven fabric compression. For this system

a PID force control method with speed as the inner loop and force as the outer loop is used

and the output force is fed back with a force sensor. The location of the hand-assisted exoskeleton cable slot is optimized by mechanics modeling. The grasping experiment for the designed exoskeleton system reveals that the assisted exoskeleton can reproduce all 33 grasp types in the Feix taxonomy; the grasping force of the exoskeleton at the fingertip can reach 14 N; with the exoskeleton

human finger joints can move by more than 63% of the independent finger bending range; the Pearson correlation coefficient of the angle of the metacarpophalangeal joint

proximal interphalangeal joint

and interphalangeal joint can reach more than 0.90; the peak RMS values of the brachioradialis muscle and the radial extensor carpi longus muscle decreased by 37.86% and 62.46%

respectively. The experimental results indicate that the designed hand-assisted exoskeleton can significantly reduce hand muscle energy consumption.

关键词

Keywords

references

贺波勇, 沈红新, 彭祺擘. 近地一次环月两次交会的载人登月任务规划 [J]. 国防科技大学学报, 2020, 42(6): 19-30.

HE Boyong, SHEN Hongxin, PENG Qibo. Manned lunar mission planning based on once low earth orbit and twice low lunar orbit rendezvous and dockings [J]. Journal of National University of Defense Technology, 2020, 42(6): 19-30.

焦维新. 中国开展载人登月的必要性 [C]//第二十五届全国空间探测学术研讨会摘要集.2012: 99.

朱恩涌, 果琳丽, 陈冲. 有人月球基地构建方案设想 [J]. 航天返回与遥感, 2013, 34(5): 1-6.

ZHU Enyong, GUO Linli, CHEN Chong. Research on manned lunar base construction scheme [J]. Spacecraft Recovery Remote Sensing, 2013, 34(5): 1-6.

方红根, 史士财, 刘宏, 等. 外骨骼机构舱外航天服手套阻尼的测量与Preisach建模 [J]. 西安交通大学学报, 2008, 42(7): 891-894.

FANG Honggen, SHI Shicai, LIU Hong, et al. Damping parameters measurement and Preisach modeling of extra vehicular activity glove based on exoskeleton mechanism [J]. Journal of Xi'an Jiaotong University, 2008, 42(7): 891-894.

GRAZIOSI D, STEIN J, ROSS A, et al. Phase VI advanced EVA glove development and certification for the international space station [C]//31st International Conference On Environmental Systems. Warrendale, PA, USA: SAE International, 2001: 2001-01-2163.

SCHEURING R A, MATHERS C H, JONES J A, et al. Musculoskeletal injuries and minor trauma in space: incidence and injury mechanisms in U. S. astronauts [J]. Aviation, Space, and Environmental Medicine, 2009, 80(2): 117-124.

方红根, 谢宗武, 刘宏, 等. 舱外航天手套关节阻尼的建模与测量 [J]. 宇航学报, 2008, 29(3): 1064-1069.

FANG Honggen, XIE Zongwu, LIU Hong, et al. Study on modeling of EVA glove joint and damping parameters measurement [J]. Journal of Astronautics, 2008, 29(3): 1064-1069.

MOHAMADDAN S, KHAMIS H, JAMALI A, et al. Development and control of hand exoskeleton system using intended movement [C]//2021 IEEE 3rd Eurasia Conference on Biomedical Engineering, Healthcare and Sustainability(ECBIOS). Piscataway, NJ, USA: IEEE, 2021: 9-12.

CASAS R, SANDISON M, CHEN Tianyao, et al. Clinical test of a wearable, high DOF, spring powered hand exoskeleton(HandSOME II)[J]. IEEE Transactions on Neural Systems and Rehabilitation Engineering, 2021, 29: 1877-1885.

KIM S, LEE J, BAE J. Analysis of finger muscular forces using a wearable hand exoskeleton system [J]. Journal of Bionic Engineering, 2017, 14(4): 680-691.

ZHANG Fuhai, HUA Lei, FU Yili, et al. Design and development of a hand exoskeleton for rehabilitation of hand injuries [J]. Mechanism and Machine Theory, 2014, 73: 103-116.

IN H, KANG B B, SIN M K, et al. Exo-glove: a wearable robot for the hand with a Soft tendon routing system [J]. IEEE Robotics Automation Magazine, 2015, 22(1): 97-105.

KANG B B, LEE H, IN H, et al. Development of a polymer-based tendon-driven wearable robotic hand [C]//2016 IEEE International Conference on Robotics and Automation(ICRA). Piscataway, NJ, USA: IEEE, 2016: 3750-3755.

POPOV D, GAPONOV I, RYU J H. Portable exoskeleton glove with soft structure for hand assistance in activities of daily living [J]. IEEE/ASME Transactions on Mechatronics, 2016, 22(2): 865-875.

POLYGERINOS P, WANG Zheng, GALLOWAY K C, et al. Soft robotic glove for combined assistance and at-home rehabilitation [J]. Robotics and Autonomous Systems, 2015, 73: 135-143.

BÜTZER T, LAMBERCY O, ARATA J, et al. Fully wearable actuated Soft exoskeleton for grasping assistance in everyday activities [J]. Soft Robotics, 2021, 8(2): 128-143.

赵芳. 软体外骨骼手部康复机器人的研究 [D]. 天津: 天津理工大学, 2016.

李敏, 陈佳洲, 何博, 等. 多段连续结构手功能康复外骨骼运动规划与结构优化 [J]. 西安交通大学学报, 2019, 53(10): 1-9.

LI Min, CHEN Jiazhou, HE Bo, et al. Motion planning and structure optimization of a multi-segment mechanism-based hand rehabilitation exoskeleton [J]. Journal of Xi'an Jiaotong University, 2019, 53(10): 1-9.

CHEN Wenyuan, LI Guangyong, LI Ning, et al. Soft exoskeleton with fully actuated thumb movements for grasping assistance [J]. IEEE Transactions on Robotics, 2022, 38(4): 2194-2207.

杨建宇, 谢华龙, 史家顺. 线驱无关节手指外骨骼的运动耦合方法 [J]. 机器人, 2016, 38(1): 27-32.

YANG Jianyu, XIE Hualong, SHI Jiashun. A motion coupling method for tendon-driven jointless finger exoskeleton [J]. Robot, 2016, 38(1): 27-32.

张玉茹, 李继婷, 李剑锋. 机器人灵巧手: 建模、规划与仿真 [M]. 北京: 机械工业出版社, 2007.

TRAN P, JEONG S, HERRIN K R, et al. Review: hand exoskeleton systems, clinical rehabilitation practices, and future prospects [J]. IEEE Transactions on Medical Robotics and Bionics, 2021, 3(3): 606-622.

刘自文, 赵亮, 于鹏, 等. 柔性外骨骼手的抓取力控制方法 [J]. 机器人, 2019, 41(4): 483-492.

LIU Ziwen, ZHAO Liang, YU Peng, et al. A control method of grasping force for soft exoskeleton hand [J]. Robot, 2019, 41(4): 483-492.

FEIX T, PAWLIK R, SCHMIEDMAYER H B, et al. The generation of a comprehensive grasp taxonomy [EB/OL]. [2022-10-10]. https://www.researchgate. net/publication/242074675.

李剑锋, 张兆晶, 张雷雨, 等. 手部外骨骼运动相容性设计综述 [J]. 上海交通大学学报, 2018, 52(6): 729-742.

LI Jianfeng, ZHANG Zhaojing, ZHANG Leiyu, et al. Review of the kinematic compatibility design of hand exoskeletons [J]. Journal of Shanghai Jiaotong University, 2018, 52(6): 729-742.

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

外骨骼机构舱外航天服手套阻尼的测量与Preisach建模

超临界水异常区域热力学特性研究

三塔合一间接空冷系统结构参数对夏季运行特性的影响研究

采用机器学习的大规模并行程序I/O性能建模与预测方法

采用试验设计方法的第三代CO2气体箔轴承箔片几何参数敏感性分析