金属杂质侵蚀下的大型发电机定子线棒绝缘劣化机理

刘凌; 张宇; 靳东松; 娄建勇

doi:10.7652/xjtuxb202206013

您当前的位置：

首页 >

文章列表页 >

金属杂质侵蚀下的大型发电机定子线棒绝缘劣化机理

—————————————————————— | 更新时间：2025-04-27

- 金属杂质侵蚀下的大型发电机定子线棒绝缘劣化机理
- Mechanism of Insulation Deterioration of Large Generator Stator Bars Eroded by Metal Impurities
- 西安交通大学学报 2022年56卷第6期页码：104-111+194
- 作者机构：
  
  1. 西安交通大学电力设备电气绝缘国家重点实验室,西安,710049
  2. 西安交通大学电气工程学院,西安,710049
- 作者简介：
  
  : 2021-11-12。作者简介: 刘凌(1980—),男,博士,副教授,博士生导师。基金项目: 国家自然科学基金资助项目(51977173)
- 基金信息：
  
  : 2021-11-12。作者简介: 刘凌(1980—),男,博士,副教授,博士生导师。基金项目: 国家自然科学基金资助项目(51977173)
- DOI：10.7652/xjtuxb202206013
  中图分类号： TM31
- 网络首发：2022-06-10，
  
  纸质出版：2022
- 稿件说明：
移动端阅览
刘凌, 张宇, 靳东松, 等. 金属杂质侵蚀下的大型发电机定子线棒绝缘劣化机理[J]. 西安交通大学学报, 2022,56(6):104-111+194.

LIU Ling, ZHANG Yu, JIN Dongsong, et al. Mechanism of Insulation Deterioration of Large Generator Stator Bars Eroded by Metal Impurities[J]. 2022, 56(6): 104-111+194.
刘凌, 张宇, 靳东松, 等. 金属杂质侵蚀下的大型发电机定子线棒绝缘劣化机理[J]. 西安交通大学学报, 2022,56(6):104-111+194. DOI： 10.7652/xjtuxb202206013.

LIU Ling, ZHANG Yu, JIN Dongsong, et al. Mechanism of Insulation Deterioration of Large Generator Stator Bars Eroded by Metal Impurities[J]. 2022, 56(6): 104-111+194. DOI： 10.7652/xjtuxb202206013.

摘要

为揭示大型发电机全工况域内金属杂质侵蚀定子线棒环氧云母绝缘层的耦合机理

对金属杂质颗粒与定子绝缘层高应变下的材料介损进行了电磁-机械-温度多场有限元模拟与实验分析。在矢量磁位的有旋场下

构建含球型金属杂质的线棒与铁芯槽电磁-机械参数化模型

赋特征单元类型及空气域奇对称边界条件; 利用矩阵等交互顺序耦合法

对该模型的体力密度值和非线性瞬态施力行为进行施力渐变分析; 研究定子线棒端部环氧绝缘层相变与微观损耗增量

得出金属杂质研磨绝缘层的形变特征值及应力特征值范围; 建立含球型金属杂质的电磁-温度模型

运用单向磁热耦合方式进行热侵蚀计算

得出杂质接触面的温度场范围。采用交变磁场下金属研磨实验对线棒切面绝缘层进行模拟施力验证

并对样本采用扫描电镜观测。实验与仿真结果表明:金属杂质焦耳损耗引起的异常温升不足以对环氧绝缘层造成短时热侵蚀; 由杂质研磨侵蚀使环氧分子链发生断裂导致云母片缺陷加剧的机械过程是定子线棒绝缘劣化的主因。本文研究可为发电机定子线棒主绝缘的状态监测与故障诊断提供一定的参考。

Abstract

To reveal the coupling mechanism of metal impurities eroding the epoxy mica insulation layer of the stator bar in the whole working condition of large generators

the dielectric loss of metal impurity particles and stator insulation layer under high strain was subject to electromagnetic-mechanical-temperature multi-field finite element simulation and experimental analysis. Firstly

the electromagnetic-mechanical parametric model of bar and core slot containing spherical metal impurities is constructed under the swirl field of vector magnetic potential

and the characteristic element type and air domain odd symmetry boundary conditions are assigned. Then

the force density value and nonlinear transient force application behavior of the model are analyzed by the interactive sequence coupling method such as the matrix method. By studying the phase transition and microscopic loss increment of the epoxy insulating layer at the end of the stator bar

the characteristic value range of stress and deformation of the metal impurity grinding insulating layer are obtained. Furthermore

an electromagnetic-temperature model containing spherical metal impurities is established and the thermal erosion calculation is carried out by using the unidirectional magneto-thermal coupling method. Based on this model

the temperature field range of the impurity contact surface is rigorously analyzed. Finally

the metal grinding experiment under the alternating magnetic field is conducted on the insulating layer of the bar section for simulated force application verification and the samples were observed by the scanning electron microscope in detail. The experimental and simulation results show that the abnormal temperature rise caused by joule loss of metal impurities is not enough to cause short-term thermal erosion of the epoxy insulation layer

and the mechanical process of sheet mica's defect being aggravated due to the breakage of the epoxy molecular chain ground and eroded by impurities is the main cause of insulation deterioration of the stator bar. The conclusion provides a reference for the state monitoring and fault diagnosis of the main insulation of generator stator bars.

关键词

Keywords

references

胡建林, 赵禹来, 刘剑, 等. 大型水轮发电机定子线棒绝缘参数对线棒槽部表面电位分布及电场分布的影响 [J]. 绝缘材料, 2020, 53(4): 39-46.

HU Jianlin, ZHAO Yulai, LIU Jian, et al. Influence of insulation parameters on surface potential and electric field distribution on slot part of large hydro-generator stator bar [J]. Insulating Materials, 2020, 53(4): 39-46.

高俊国, 孟睿潇, 胡海涛, 等. 电机定子绝缘老化寿命预测研究进展 [J]. 电工技术学报, 2020, 35(14): 3065-3074.

GAO Junguo, MENG Ruixiao, HU Haitao, et al. Research progress on prediction of aging life of motor stator insulation [J]. Transactions of China Electrotechnical Society, 2020, 35(14): 3065-3074.

葛臣忠, 宁苏辉, 付强, 等. 大型发电机定子绕组绝缘性能影响因素 [J]. 大电机技术, 2014(3): 35-40.

GE Chenzhong, NING Suhui, FU Qiang, et al. Impact factors on large generator stator windings insulation property [J]. Large Electric Machine and Hydraulic Turbine, 2014(3): 35-40.

刘向东, 聂靓靓, 金海云. 抽水蓄能发电机定子线棒绝缘击穿理化性能分析 [J]. 绝缘材料, 2020, 53(11): 74-81.

LIU Xiangdong, NIE Liangliang, JIN Haiyun. Analysis on breakdown, physical and chemical properties of stator bar insulation for pumped storage generator [J]. Insulating Materials, 2020, 53(11): 74-81.

张跃, 梁智明, 胡波, 等. 采用混合核函数支持向量机算法的大型发电机定子线棒绝缘状态评估方法 [J]. 西安交通大学学报, 2020, 54(6): 44-50.

ZHANG Yue, LIANG Zhiming, HU Bo, et al. An evaluation method for insulation state of large generator stator bar based on support vector machine with hybrid kernel function [J]. Journal of Xi'an Jiaotong University, 2020, 54(6): 44-50.

杜炎森, 黄学良, 刘磊, 等. 大型汽轮发电机端部三维温度场研究 [J]. 中国电机工程学报, 1996, 16(2): 95-101.

DU Yansen, HUANG Xueliang, LIU Lei, et al. Study on temperature distribution in the end region of large turbogenerators [J]. Proceedings of the CSEE, 1996, 16(2): 95-101.

张芳芳. 大电机定子线圈端部防晕特性损耗仿真分析与实验研究 [D]. 哈尔滨: 哈尔滨理工大学, 2018: 9-15.

王新, 杨敏, 金泱, 等. 基于热老化的发电机定子线棒局部放电特性研究 [J]. 绝缘材料, 2021, 54(4): 58-63.

WANG Xin, YANG Min, JIN Yang, et al. Partial discharge characteristics of typical defects in generator stator after thermal ageing [J]. Insulating Materials, 2021, 54(4): 58-63.

黄涛, 阮江军, 张宇娇, 等. 多相异步电机端部绕组电磁与结构耦合场分析 [J]. 大电机技术, 2011(3): 1-4, 9.

HUANG Tao, RUAN Jiangjun, ZHANG Yujiao, et al. Magneto-structural coupling field analysis on the end winding of multi-phase asynchronous motor [J]. Large Electric Machine and Hydraulic Turbine, 2011(3): 1-4, 9.

张宇娇, 吴刚梁, 翁杰, 等. 发电电动机定子端部绕组电磁-结构耦合场计算 [J]. 水电能源科学, 2015, 33(10): 141-144.

ZHANG Yujiao, WU Gangliang, WENG Jie, et al. Magneto-structural coupling field calculation of stator end windings of generator-motor [J]. Water Resources and Power, 2015, 33(10): 141-144.

陈文聪, 叶坤, 杜巍. 大型水轮发电机组定子线棒端部电晕放电预防与研究 [J]. 自动化应用, 2021(6): 31-34.

CHEN Wencong, YE Kun, DU Wei. Study on corona discharge prevention of stator rod end of large hydro-generator set [J]. Automation Application, 2021(6): 31-34.

刘石, 仲继泽, 冯永新, 等. 使用磁流变阻尼器的大型汽轮发电机定子端部绕组振动控制 [J]. 西安交通大学学报, 2013, 47(4): 39-43.

LIU Shi, ZHONG Jize, FENG Yongxin, et al. Magneto rheological technology of vibration isolation for stator end-winding of large generators [J]. Journal of Xi'an Jiaotong University, 2013, 47(4): 39-43.

刘向东, 肖发福, 黄明浩, 等. 抽水蓄能发电机定子线棒绝缘击穿故障分析 [J]. 水电能源科学, 2020, 38(12): 145-148, 175.

LIU Xiangdong, XIAO Fafu, HUANG Minghao, et al. Insulation breakdown fault analysis of stator bar for pumped storage generator [J]. Water Resources and Power, 2020, 38(12): 145-148, 175.

王晓剑, 何天磊, 徐俊元, 等. 基于HN介电弛豫模型评估环氧云母绝缘的老化状态 [J]. 绝缘材料, 2019, 52(8): 41-46.

WANG Xiaojian, HE Tianlei, XU Junyuan, et al. Evaluation on ageing state of epoxy mica insulation based on HN dielectric relaxation model [J]. Insulating Materials, 2019, 52(8): 41-46.

马倩倩. 水轮发电机转子绕组匝间短路故障特征与检测方法研究 [D]. 北京: 华北电力大学, 2019: 6-16.

苏燕民. 基于“电蚀虫”入侵的发电机定子线棒绝缘损坏 [J]. 大电机技术, 2015(6): 39-42.

SU Yanmin. Damage to generator stator bar insulation from “Electric Erosion Worm” invasion [J]. Large Electric Machine and Hydraulic Turbine, 2015(6): 39-42.

胡宇达, 邱家俊, 黄良. 大型发电机定子端部绕组的电磁特性 [J]. 机械强度, 2006, 28(1): 20-24.

HU Yuda, QIU Jiajun, HUANG Liang. Electromagnetic characteristics on stator end windings of large turbo-generator [J]. Journal of Mechanical Strength, 2006, 28(1): 20-24.

曹铁男. 大电机定子线棒的参数化建模及数值仿真系统的开发 [D]. 哈尔滨: 哈尔滨理工大学, 2018: 6-7.

刘剑, 汪江昆, 徐晖, 等. 大型水轮发电机定子绕组端部电场分布特性研究 [J]. 大电机技术, 2021(5): 8-14, 20.

LIU Jian, WANG Jiangkun, XU Hui, et al. The research on the distribution characteristics of electric field at the end of stator winding of large hydro-generator [J]. Large Electric Machine and Hydraulic Turbine, 2021(5): 8-14, 20.

胡建林, 赵禹来, 刘剑, 等. 大型水轮发电机定子线棒绝缘参数对线棒槽部表面电位分布及电场分布的影响 [J]. 绝缘材料, 2020, 53(4): 39-46.

朱南龙, 齐琳, 祁安博. 抽水蓄能发电机转子结构的电磁力分析与结构优化 [J]. 科技风, 2019(34): 157.

ZHU Nanlong, QI Lin, QI Anbo. Electromagnetic force analysis and structural optimization of pumped storage generator rotor structure [J]. Technology Wind, 2019(34): 157.

马明晗. 汽轮发电机励磁绕组匝间短路故障复合特征分析与诊断 [D]. 北京: 华北电力大学, 2019: 23-43.

王婷婷. 空冷汽轮发电机定子主绝缘的电-热场研究 [D]. 北京: 北京交通大学, 2019: 31-57.

周源远, 范小军, 李亮, 等. 燃气轮机叶片前缘旋流冷却的热流固耦合数值研究 [J]. 西安交通大学学报, 2020, 54(1): 135-142.

ZHOU Yuanyuan, FAN Xiaojun, LI Liang, et al. Numerical research on the swirl cooling using thermal-fluid-structure coupled method for turbine blade leading edge [J]. Journal of Xi'an Jiaotong University, 2020, 54(1): 135-142.

王辉, 汪小芳. 贴壁式结构水轮发电机定子温度场有限元法研究 [J]. 大电机技术, 2018(2): 40-44.

WANG Hui, WANG Xiaofang. Thermal field analysis for holistic bulb turbine generator stator using finite element method [J]. Large Electric Machine and Hydraulic Turbine, 2018(2): 40-44.

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

考虑接触热阻与对流换热系数修正的滚珠丝杠副温升建模与分析

涡轮叶片裂纹方位角的三维叶尖间隙动态响应特性研究

圆柱壳高频弯曲振动的能量有限元分析

越江隧道泥水盾构施工引起地层移动的有限元分析

螺栓被连接件刚度理论的计算方法