平面接触运动干摩擦阻尼器的微滑移数值模型

蔺彦虎; 秋朋园; 汪久根; 张靖

doi:10.7652/xjtuxb202106003

您当前的位置：

首页 >

文章列表页 >

平面接触运动干摩擦阻尼器的微滑移数值模型

更新时间：2025-07-09

- 平面接触运动干摩擦阻尼器的微滑移数值模型
- Numerical Micro-Slip Model for Dry Friction Damper in 2D Kinematic Contact Motion
- 西安交通大学学报 2021年55卷第6期页码：18-27
- 作者机构：
  
  1. 浙江大学机械工程学院,杭州,310027
  2. 台州学院航空工程学院,浙江,台州,318000
  3. 浙江双环传动机械股份有限公司传动研究院,浙江,台州,318000
- 作者简介：
- 基金信息：
  
  : 2020-10-28。作者简介: 蔺彦虎(1983—),男,博士后;汪久根(通信作者),男,教授,博士生导师。基金项目: 国家高技术研究发展计划资助项目(2015AA043002);浙江省自然科学基金资助项目(LQ20E050010)
- DOI：10.7652/xjtuxb202106003
  中图分类号： TH133
- 网络首发：2021-06-10，
  
  纸质出版：2021
- 稿件说明：
移动端阅览
蔺彦虎, 秋朋园, 汪久根, 等. 平面接触运动干摩擦阻尼器的微滑移数值模型[J]. 西安交通大学学报, 2021,55(6):18-27.

Numerical Micro-Slip Model for Dry Friction Damper in 2D Kinematic Contact Motion[J]. 2021, 55(6): 18-27.
蔺彦虎, 秋朋园, 汪久根, 等. 平面接触运动干摩擦阻尼器的微滑移数值模型[J]. 西安交通大学学报, 2021,55(6):18-27. DOI： 10.7652/xjtuxb202106003.

Numerical Micro-Slip Model for Dry Friction Damper in 2D Kinematic Contact Motion[J]. 2021, 55(6): 18-27. DOI： 10.7652/xjtuxb202106003.

摘要

为克服宏滑移模型无法计及阻尼器柔性及一维微滑移模型对运动维度和激励时变性限制

考虑阻尼器自身柔性

将阻尼器离散

在其接触面节点安置滞后弹簧单元

形成干摩擦阻尼器的平面微滑移数值模型。模型应用滞后弹簧元族模拟摩擦接触面局部黏-滑效应。求解模型时

离散外部激励历程

用状态向量标定阻尼器局部黏滞-滑移-分离特征; 运用数值累积方法对接触摩擦面局部状态持续跟踪

跟踪过程依据接触面黏滞-滑移-分离转化判据持续修正位移、摩擦力及运动状态向量

最终得到稳定的触点位移-干摩擦力滞回曲线。阻尼器法向载荷较大时

共振频响结果显示

应用平面运动微滑移模型的位移频响较宏滑移模型位移频响计算结果差异明显

在共振频率点

宏滑移模型频响结果为0.049 m

而微滑移模型结果为0.038 m

相差22.4%

微滑移模型求解结果更趋近于实验结果。

Abstract

A 2D numerical micro-slip model was developed in order to overcome the limitation on kinematic direction and time-invariant excitation of the one-dimensional micro-slip model

and the incapability of considering the flexibility of the damper when using a traditional macro-slip model. In this model

the dry friction damper was discretized and the lag spring family was used to indicate the local stick-slip effects of the frictional contact surface. The time-process of the external excitation was dispersed and the state vectors were applied to calibrate the local stick-slip-separation state of the contact surface in the beginning of the solution procedure

and then the local kinematic state of the contact friction surface was continuously tracked by the numerical accumulation method. The displacement

friction force and kinematic state vectors were corrected by time point during the solving process according to the stick-slip-separation transformation criterion. After several cycles of tracking

a stable hysteretic curve of contact displacement versus dry friction force was obtained. Resonance frequency response results show that the displacement frequency response calculated by the plane motion micro-slip model is 0.049 m versus 0.038 m calculated by the macro-slip model while greater normal force is applied to the damper

indicating a 22.4% difference between the two dry friction models

and the results obtained by the micro-slip model are closer to the experimental data.

关键词

Keywords

references

晏砺堂, 朱梓根, 李其汉, 等. 高速旋转机械振动 [M]. 北京: 国防工业出版社, 1994: 124-171.

李琳, 刘久周, 李超. 航空发动机中的干摩擦阻尼器及其设计技术研究进展 [J]. 航空动力学报, 2016, 31(10): 2305-2317.

LI Lin, LIU Jiuzhou, LI Chao. Review of the dry friction dampers in aero-engine and their design technologies [J]. Journal of Aerospace Power, 2016, 31(10): 2305-2317.

HARTOG J P D. Forced vibrations with combined coulomb and viscous friction [J]. Transactions of the ASME, 1931, 53(9): 107-115.

BYYUCATAMAN K. A theoretical study on the vibration damping of aircraft gearbox gears [C]∥27th Joint Propulsion Conference. New York: ASME, 1991: 1-6.

GRIFFIN J H. Friction damping of resonant stresses in gas turbine engine airfoils [J]. Transactions of the American Society of Mechanical Engineers: Journal of Engineering for Power, 1980, 102(2): 329-333.

YANG B D, CHU M L, MENQ C H. Stick-slip-separation analysis and non-linear stiffness and damping characterization of friction contacts having variable normal load [J]. Journal of Sound and Vibration, 1998, 210(4): 461-481.

YANG B D, MENQ C H. Characterization of 3d contact kinematics and prediction of resonant response of structures having 3d frictional constraint [J]. Journal of Sound and Vibration, 1998, 217(5): 909-925.

漆文凯, 高德平. 摩擦阻尼减振设计中的局部滑动问题 [J]. 航空学报, 2006, 27(5): 805-809.

QI Wenkai, GAO Deping. Microslip study on friction damping and its application in design of vibration reduction [J]. Acta Aeronautica et Astronautica Sinica, 2006, 27(5): 805-809.

徐自力, 常东锋, 刘雅琳. 基于微滑移解析模型的干摩擦阻尼叶片稳态响应分析 [J]. 振动工程学报, 2008, 21(5): 505-510.

XU Zili, CHANG Dongfeng, LIU Yalin. Forced response analysis of blade system with dry friction damper using one-bar microslip analytic model [J]. Journal of Vibration Engineering, 2008, 21(5): 505-510.

上官博, 徐自力, 肖俊峰, 等. 一种正压力随时间变化的微滑移干摩擦模型 [J]. 振动工程学报, 2016, 29(3): 444-451.

SHANGGUAN Bo, XU Zili, XIAO Junfeng, et al. A microslip dry friction model with variable normal load [J]. Journal of Vibration Engineering, 2016, 29(3): 444-451.

CIGEROGLU E, AN Ning, MENQ C H. A microslip friction model with normal load variation induced by normal motion [J]. Nonlinear Dynamics, 2007, 50(3): 609-626.

FIRRONE C M, ZUCCA S. Passive control of vibration of thin-walled gears: advanced modelling of ring dampers [J]. Nonlinear Dynamics, 2014, 76(1): 263-280.

樊江, 戴琦晖, 王晋斌, 等. 带涂层干摩擦阻尼器的分子动力学仿真 [J]. 航空动力学报, 2018, 33(10): 2333-2342.

FAN Jiang, DAI Qihui, WANG Jinbin, et al. Molecular dynamics simulations of dry friction dampers with coating [J]. Journal of Aerospace Power, 2018, 33(10): 2333-2342.

王计辉, 陈志, 顾灿鸿, 等. 机械密封在干摩擦状态下的摩擦界面热力耦合分析 [J]. 摩擦学学报, 2019, 39(6): 737-745.

WANG Jihui, CHEN Zhi, GU Canhong, et al. Thermo-mechanical coupling analysis of friction interface of mechanical seals under dry friction [J]. Tribology, 2019, 39(6): 737-745.

HIBBITT H, KARLSSON B, SORENSEN P. Abaqus 6.12 analysis user's manual [EB/OL]. [2020 -10-02].http:∥ivt-abaqusdoc.ivt.ntnu.no.2080/v6. 14/index.html.

SANLITURK K Y, EWINS D J. Modelling two-dimensional friction contact and its application using harmonic balance method [J]. Journal of Sound and Vibration, 1996, 193(2): 511-523.

单颖春, 朱梓根, 刘献栋. 凸肩结构对叶片的干摩擦减振研究-规律分析 [J]. 航空动力学报, 2006, 21(1): 174-180.

SHAN Yingchun, ZHU Zigen, LIU Xiandong. Investigation of the vibration control by frictional constraints between blade shrouds rule analysis [J]. Journal of Aerospace Power, 2006, 21(1): 174-180.

POUDOU O J. Modeling and analysis of the dynamics of dry-friction-damped structural systems [D]. Ann Arbor, USA: University of Michigan, 2007: 88-124.

蒲晓晖,徐俊,李士盈,梅雪松.电磁阻尼器惯性质量对汽车馈能悬架减振性能的影响[J].2019,53(6):62-68,84.[doi:10.7652/xjtuxb201906009]

夏凯,孙岩桦,卓明,赵世全.带传扭销的环形平面接触轴段扭转特性研究[J].2018,52(9):82-88.[doi:10.7652/xjtuxb 201809013]

刘雅琳,上官博,徐自力.干摩擦阻尼对失谐叶盘系统受迫振动的影响[J].2016,50(2):111-117.[doi:10.7652/xjtuxb 201602019]

张凯,陈天宁,王小鹏.非阻塞性颗粒阻尼器内部的颗粒莱顿弗罗斯特现象[J].2016,50(8):15-19,44.[doi:10.7652/xjtuxb201608003]

张俊红,马梁,鲁鑫,王俊,林杰威.机动飞行下挤压油膜阻尼器对碰摩故障转子系统的影响[J].2015,49(11):62-70,141.[doi:10.7652/xjtuxb201511011]

陈艳华,江俊.转子/定子碰摩系统的非线性模态及其在干摩擦反向涡动响应预测中的应用[J].2014,48(5):82-88.[doi:10.7652/xjtuxb201405015]

薛晓敏,孙清,伍晓红,张陵.磁流变阻尼器滞回模型参数的敏感性分析及其简化模型[J].2013,47(7):102-107.[doi:10.7652/xjtuxb201307019]

刘石,仲继泽,冯永新,徐自力.使用磁流变阻尼器的大型汽轮发电机定子端部绕组振动控制[J].2013,47(4):39-43.[doi:10.7652/xjtuxb201304008]

薛晓敏,孙清,张陵,伍晓红.利用遗传算法的磁流变阻尼器结构含时滞半主动控制[J].2010,44(9):122-127.

刘雅琳,徐自力,上官博,王尚锦.时频域交互法在微滑移干摩擦阻尼叶片振动分析中的应用[J].2009,43(11):22-26.

谷伟伟,徐自力,胡哺松,王尚锦.微滑移阻尼叶片最优正压力的影响因素分析[J].2008,42(7):828-832.

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

采用试验设计方法的第三代CO2气体箔轴承箔片几何参数敏感性分析

融合物理信息与深度算子网络的变压器绕组热-流场快速计算方法

混合电解槽阵列协同的风光耦合制氢系统双层多目标优化

水蒸气掺混对氨裂解气旋流燃烧与排放特性的影响研究

三塔合一间接空冷系统结构参数对夏季运行特性的影响研究