重载下滚动直线导轨副的接触特性

田红亮; 余媛; 杜义贤

doi:10.7652/xjtuxb201809001

您当前的位置：

首页 >

文章列表页 >

重载下滚动直线导轨副的接触特性

更新时间：2025-05-01

- 重载下滚动直线导轨副的接触特性
- Contact Characters of Rolling Linear Guide Way Pair Under Heavy Load
- 西安交通大学学报 2018年52卷第9期页码：1-9
- 作者机构：
  
  三峡大学机械与动力学院,湖北,宜昌,443002
- 作者简介：
- 基金信息：
  
  : 2018-03-11。作者简介: 田红亮(1973—),男,教授;杜义贤(通信作者),男,教授,博士生导师。基金项目: 国家自然科学基金资助项目(51775308);三峡大学2015级硕士学位论文培优基金资助项目(2017YPY026)
- DOI：10.7652/xjtuxb201809001
  中图分类号： TH113.1
- 网络首发：2018-09-10，
  
  纸质出版：2018
- 稿件说明：
移动端阅览
田红亮, 余媛, 杜义贤. 重载下滚动直线导轨副的接触特性[J]. 西安交通大学学报, 2018,52(9):1-9.

Contact Characters of Rolling Linear Guide Way Pair Under Heavy Load[J]. 2018, 52(9): 1-9.
田红亮, 余媛, 杜义贤. 重载下滚动直线导轨副的接触特性[J]. 西安交通大学学报, 2018,52(9):1-9. DOI： 10.7652/xjtuxb201809001.

Contact Characters of Rolling Linear Guide Way Pair Under Heavy Load[J]. 2018, 52(9): 1-9. DOI： 10.7652/xjtuxb201809001.

摘要

针对现有数控机床滚动直线导轨副的研究仅限于外力小于临界力时的情况

求解了当外力大于临界力时的静力学特性参数。假设在轻载下

滑块和直线导轨都给滚珠施加相等的压力

则滚珠的压缩变形量是传统结果的2倍

据此对外力小于临界力时的刚度公式进行了改进。考虑在重载下上滚珠受力但下滚珠不受力

建立了滚动直线导轨副的刚度公式

从而构建了外力小于临界力以及大于临界力时的完整刚度公式

并通过有限元法获得了滚珠与滚道之间的接触应力和接触变形量。理论分析表明:导轨副在轻载下

上滚珠力是外力的隐函数

但外力是上滚珠力的显函数; 在轻载和重载的整个范围内

导轨副的所有静力学特性参数都是上滚珠力的显函数。仿真结果表明:当外力小于临界力时

上滚珠力和刚度均随预载荷等级的提高而增大; 当外力大于临界力时

导轨副刚度随外力的增大而增大

上滚珠力和刚度都不依赖预载荷等级; 上滚珠力随外力的增大而增大

下滚珠力随外力的增大或预载荷等级的降低而减小; 上滚珠刚度随外力的增大而增大

下滚珠刚度随外力的增大而减小。推导的完整刚度公式可为分析数控机床滚动直线导轨副的接触特性提供参考。

Abstract

The current researches about the rolling linear guide way pair of a CNC machine tool are usually set within the limit of outer force less than the critical force

thus the static characteristic parameters are solved for the case of outer force larger than the critical force. Provided that the carriage and linear guide way transfer the equivalent compressive force to the ball under light load

the ball's compressive deformation is two times the traditional result

hence the stiffness formulas for the case of outer force less than the critical force are improved. The rolling linear guide way pair's stiffness formulas are established considering that the upper ball bears force but no force on the lower ball under heavy load. As a result

the general stiffness formulas are set up for the outer force less than or larger than the critical force. The contact stress and contact deformation between the ball and race are attained through finite element method. Theoretical analysis shows that the upper ball force is an implicit function of the outer force

but the outer force is an explicit function of the upper ball force when the guide way pair is under light load. All static characteristic parameters of the guide way pair are explicit functions of the upper ball force within the whole ranges of light and heavy loads. Simulation shows that: 1)when the outer force is smaller than the critical force

the upper ball force and stiffness increase with the improvement of preload grade; 2)when the outer force is larger than the critical force

the guide way pair's stiffness increases with the increase of outer force

and the upper ball force and stiffness are independent of preload grade; 3)the upper ball force increases with the increase of outer force

and the lower ball force decreases with the increase of outer force or with the reduction of preload grade; and 4)the upper ball stiffness increases and the lower ball stiffness decreases with the increase of outer force. These general stiffness formulas may be applied to the analysis of the contact characteristics of rolling linear guide way pair for CNC machine tools.

关键词

Keywords

references

毛宽民, 李斌, 雷声. 机床结合部动力学建模及应用 [M]. 武汉: 武汉理工大学出版社, 2018: 36, 90.

毛宽民, 龚灿, 李斌, 等. 考虑波纹度的滚珠直线导轨动力学建模研究 [J]. 华中科技大学学报(自然科学版), 2014, 42(6): 1-5.

MAO Kuanmin, GONG Can, LI Bing, et al. Dynamic modeling research of linear motion ball guide considering surface waviness [J]. Journal of Huazhong University of Science and Technology(Natural Science Edition), 2014, 42(6): 1-5.

毛宽民, 邢满禧, 李斌, 等. 滚动直线导轨副可动结合部动力学建模 [J]. 华中科技大学学报(自然科学版), 2016, 44(7): 81-85.

MAO Kuanmin, XING Manxi, LI Bin, et al. Dynamic modeling for movable joint of rolling linear guide [J]. Journal of Huazhong University of Science and Technology(Natural Science Edition), 2016, 44(7): 81-85.

王禹林, 李作康, 仇进生, 等. 直线导轨副综合静刚度测量装置及方法 [J]. 华中科技大学学报(自然科学版), 2017, 45(9): 58-63.

WANG Yulin, LI Zuokang, QIU Jinsheng, et al. Device and method for simultaneously measuring comprehensive static stiffness of linear guideway [J]. Journal of Huazhong University of Science and Technology(Natural Science Edition), 2017, 45(9): 58-63.

马雅丽, 宁昰超, 钱峰. 滚动直线导轨固有特性分析 [J]. 华中科技大学学报(自然科学版), 2016, 44(9): 59-64.

MA Yali, NING Shichao, QIAN Feng. Natural vibration performance analysis of rolling linear guide [J]. Journal of Huazhong University of Science and Technology(Natural Science Edition), 2016, 44(9): 59-64.

田红亮, 郑金华, 陈甜敏, 等. 直线运动滚动导轨副的法向接触力学模型 [J]. 西安交通大学学报, 2016, 50(5): 1-11.

TIAN Hongliang, ZHENG Jinhua, CHEN Tianmin, et al. Normal contact mechanics model of linear motion rolling guideway pair [J]. Journal of Xi'an Jiaotong University, 2016, 50(5): 1-11.

刘耀, 黄玉美. 机床滚珠导轨中圆柱面-球面结合面静特性分析及试验研究 [J]. 机械工程学报, 2013, 49(21): 25-30.

LIU Yao, HUANG Yumei. Theoretical analysis and experimental study on static characteristics of the cylindrical-spherical joint surfaces of linear ball guide on machine tool [J]. Journal of Mechanical Engineering, 2013, 49(21): 25-30.

孙伟, 孔祥希, 汪博, 等. 直线滚动导轨的Hertz接触建模及接触刚度的理论求解 [J]. 工程力学, 2013, 30(7): 230-234.

SUN Wei, KONG Xiangxi, WANG Bo, et al. Contact modeling and analytical solution of contact stiffness by Hertz theory for the linear rolling guide system [J]. Engineering Mechanics, 2013, 30(7): 230-234.

王民, 乐兵兵, 裴二阳. 基于Hertz接触的滚珠直线导轨副接触刚度建模与分析 [J]. 北京工业大学学报, 2015, 41(8): 1128-1132, 1150.

WANG Min, LE Bingbing, PEI Eryang. Contact stiffness modeling and analysis of linear ball guides based on Hertz contact theory [J]. Journal of Beijing University of Technology, 2015, 41(8): 1128-1132, 1150.

KONG Xiangxi, SUN Wei, WANG Bo, et al. Dynamic and stability analysis of the linear guide with time-varying, piecewise-nonlinear stiffness by multi-term incremental harmonic balance method [J]. Elsevier Journal of Sound and Vibration, 2015, 346: 265-283.

SUN Wei, KONG Xiangxi, WANG Bo, et al. Statics modeling and analysis of linear rolling guideway considering rolling balls contact [J]. Proceedings of the Institution of Mechanical Engineers: Part C Journal of Mechanical Engineering Science, 2015, 229(1): 168-179.

孙伟, 汪博. 机械系统结合部数字化建模与分析 [M]. 武汉: 武汉理工大学出版社, 2016: 166-167.

《数学手册》编写组. 数学手册 [M]. 北京: 高等教育出版社, 2016: 32, 601.

濮良贵, 陈国定, 吴立言. 机械设计 [M]. 9版. 北京: 高等教育出版社, 2016: 335.

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

直线运动滚动导轨副的法向接触力学模型

随机抽样在粗糙表面接触力学行为分析中的应用

尺蠖型压电旋转驱动器钳位特性分析

分形特征表面接触磨损模拟

温度影响下箔片动压止推轴承分析