高亮.多功能复合点阵夹芯结构主动换热及优化设计[D].哈尔滨工业大学,2014(01).

State Key Laboratory of Mechanical Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an 710049, Shannxi, China,State Key Laboratory of Mechanical Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an 710049, Shannxi, China,State Key Laboratory of Mechanical Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an 710049, Shannxi, China,State Key Laboratory of Mechanical Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an 710049, Shannxi, China,State Key Laboratory of Mechanical Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an 710049, Shannxi, China.Numerical prediction of heat loss from a test ribbed rectangular channel using the conjugate calculations[J].International Communications in Heat and Mass Transfer,2018.

J. Meng,L.F. Liao,D. Li,Y. Cao,L.Y. Yang,Y.Y. Chen.Topology Optimization Method Research on Hollow Wide-chord Fan Blade of a High-bypass Turbofan Engine[J].Procedia Engineering,2015.

Seung Ki Moon,Yu En Tan,Jihong Hwang,Yong-Jin Yoon.Application of 3D printing technology for designing light-weight unmanned aerial vehicle wing structures[J].International Journal of Precision Engineering and Manufacturing-Green Technology,2014.

Christopher S. Roper.Multiobjective optimization for design of multifunctional sandwich panel heat pipes with micro-architected truss cores[J].International Journal of Heat and Fluid Flow,2010(1).

T. Kim,H.P. Hodson,T.J. Lu.Contribution of vortex structures and flow separation to local and overall pressure and heat transfer characteristics in an ultralightweight lattice material[J].International Journal of Heat and Mass Transfer,2005(19).

L. Valdevit,J.W. Hutchinson,A.G. Evans.Structurally optimized sandwich panels with prismatic cores[J].International Journal of Solids and Structures,2004(18).

Jing-Sheng Liu,Tian Jian Lu.Multi-objective and multi-loading optimization of ultralightweight truss materials[J].International Journal of Solids and Structures,2003(3).

吴林志,熊健,马力.复合材料点阵结构力学性能表征[M].科学出版社,2015.

卢天健, 徐峰, 文婷, 著.周期性多孔金属材料的热流性能[M].科学出版社,2010.

方岱宁, 张一慧, 崔晓东, 编著.轻质点阵材料力学与多功能设计[M].科学出版社,2009.

李爽,杨金水,吴林志,于国财,杨丽红,曲嘉.边界和杆件倾角对沙漏点阵结构振动特性的影响[J].哈尔滨工程大学学报,2019(05).

王向明,苏亚东,吴斌,张瑞,王福雨,汪嘉兴,邢本东.微桁架点阵结构在飞机结构/功能一体化中的应用[J].航空制造技术,2018(10).

柏龙,熊飞,陈晓红,易长炎,张俊芳,陈锐.SLM制备的Ti6Al4V轻质点阵结构多目标结构优化设计研究[J].机械工程学报,2018(05).

易长炎,柏龙,陈晓红,刘富樯,张俊芳,龙樟.金属三维点阵结构拓扑构型研究及应用现状综述[J].功能材料,2017(10).

徐文涛.增材制造在燃气轮机中的应用[J].燃气轮机技术,2017(03).

施月奇,陈建恩,葛为民,刘军,王肖锋.金字塔型点阵夹芯梁振动特性分析[J].动力学与控制学报,2017(04).

闫国良,毛伟,万小朋.轻质点阵夹芯结构主动换热性能影响因素分析[J].机械科学与技术,2017(03).

孙世杰.增材制造方法生产的TiAl合金零件将被应用于飞机发动机涡轮叶片[J].粉末冶金工业,2015(01).

吴林志,熊健,马力,王兵,泮世东,刘海涛.轻质夹层多功能结构一体化设计[J].力学与实践,2012(04).

张磊,邱志平.碳纤维增强点阵夹芯结构的散热承载协同优化[J].航空动力学报,2012(01).

宋亚军,李童,张荻,蓝吉兵,谢永慧.燃气轮机叶片内部扰流肋冷却方式研究进展[J].热力透平,2011(04).

陈明继,裴永茂,方岱宁.Multi-objective optimization design of radar absorbing sandwich structure[J].Applied Mathematics and Mechanics(English Edition),2010(03).

李斌潮,张钱城,卢天健.基于实验模态分析的点阵夹层结构动态性能预测[J].固体力学学报,2008(04).

卢天健,何德坪,陈常青,赵长颖,方岱宁,王晓林.超轻多孔金属材料的多功能特性及应用[J].力学进展,2006(04).