叶型轮廓度偏差对离心叶轮性能影响的数值研究

樊宏周; 雷伟鹏; 王志恒; 席光

doi:10.7652/xjtuxb202509019

您当前的位置：

首页 >

文章列表页 >

叶型轮廓度偏差对离心叶轮性能影响的数值研究

—————————————————————— | 更新时间：2025-09-11

- 叶型轮廓度偏差对离心叶轮性能影响的数值研究
- Numerical Investigation on the Influence of Blade Profile Deviation on the Performance of Centrifugal Impellers
- 西安交通大学学报 2025年59卷第9期页码：197-208
- 作者机构：
  
  西安交通大学能源与动力工程学院， 710049，西安
- 作者简介：
  
  樊宏周（1976—），男，高级工程师
  王志恒，男，副教授，博士生导师。
- 基金信息：
  
  国家自然科学基金资助项目(52130603)
- DOI：10.7652/xjtuxb202509019
  中图分类号： TK05
- 收稿：2025-01-20，
  
  网络首发：2025-06-13，
  
  纸质出版：2025-09-10
- 稿件说明：
移动端阅览
樊宏周, 雷伟鹏, 王志恒, 等. 叶型轮廓度偏差对离心叶轮性能影响的数值研究[J]. 西安交通大学学报, 2025,59(9):197-208.

FAN Hongzhou, LEI Weipeng, WANG Zhiheng, et al. Numerical Investigation on the Influence of Blade Profile Deviation on the Performance of Centrifugal Impellers[J]. Journal of Xi’an Jiaotong University, 2025, 59(9): 197-208.
樊宏周, 雷伟鹏, 王志恒, 等. 叶型轮廓度偏差对离心叶轮性能影响的数值研究[J]. 西安交通大学学报, 2025,59(9):197-208. DOI： 10.7652/xjtuxb202509019.

FAN Hongzhou, LEI Weipeng, WANG Zhiheng, et al. Numerical Investigation on the Influence of Blade Profile Deviation on the Performance of Centrifugal Impellers[J]. Journal of Xi’an Jiaotong University, 2025, 59(9): 197-208. DOI： 10.7652/xjtuxb202509019.

摘要

为研究叶型轮廓度偏差对离心叶轮性能的影响，以Krain叶轮为研究对象，通过构建实际加工中的叶型偏差模型，研究了叶型局部及全局偏差对叶轮性能的影响。针对叶型局部偏差，分析了不同弦长位置等厚轮廓度偏差对叶轮性能的影响；在对性能影响最显著的弦长位置，研究了不同偏差对叶轮性能的影响规律。针对叶型全局偏差，分别探讨了轮廓度及扭转偏差对叶轮性能的影响。数值结果表明：靠近前缘的局部偏差对叶轮性能影响最大，且吸力面偏差与叶轮性能变化存在对应关系，吸力面先过切后欠切恶化了叶轮性能，吸力面先欠切后过切优化了靠近前缘叶片的曲率变化，增大了流道易产生阻塞的通流面积，进而提升了叶轮性能，特别在大流量工况，等熵效率提升1.5%，阻塞流量增大0.6%。叶片全局轮廓度及扭转偏差分别通过改变整个流道的通流面积及叶片进出口安装角影响了叶轮性能，设计工况下，全局负轮廓度、正扭转偏差总压比最大提升了1.2%、1.4%。该研究工作为离心叶轮的加工制造及叶型优化提供了有益参考。

Abstract

To investigate the influence of blade profile deviation on the performance of centrifugal impellers

the Krain impeller is selected as the research object. A blade deviation model based on actual manufacturing processes is developed to examine the effects of both local and global blade deviations on impeller performance. For local blade deviations

the impact of uniform-thickness profile deviations at different chordwise positions on impeller performance is analyzed. At the chordwise position with the most significant influence on performance

the relationship between different deviations and impeller performance is examined. For global blade deviations

the effects of both profile and twist deviations on impeller performance are explored. Numerical results indicate that local deviations near the leading edge have the greatest impact on impeller performance. A corresponding relationship exists between suction-side deviations and performance changes: deviations where the suction side is first undercut and then overcut degrade impeller performance

whereas deviations where the suction side is first overcut and then undercut optimize the curvature variation near the leading edge

increasing the flow passage area prone to blockage and thereby improving impeller performance. Specifically

under large-flow conditions

the isentropic efficiency increases by 1.5%

and the blockage flow rate rises by 0.6%. Global blade profile and twist deviations influence impeller performance by altering the entire flow passage area and the blade inlet/outlet installation angles

respectively. At the design condition

the total pressure ratio improves by up to 1.2% and 1.4% for global negative profile deviation and positive twist deviation

respectively. This study provides valuable insights for the manufacturing and blade profile optimization of centrifugal impellers.

关键词

Keywords

references

张梅 , 席光 , 唐永洪 . 离心压气机楔形扩压器设计及改进方法研究 [J ] . 工程热物理学报 , 2020 , 41 ( 3 ): 601 - 608 .

ZHANG Mei , XI Guang , TANG Yonghong . Study on design and improvement of wedge vane diffuser for centrifugal compressor [J ] . Journal of Engineering Thermophysics , 2020 , 41 ( 3 ): 601 - 608 .

胡晨星 , 耿开贺 , 张成 , 等 . 叶片安装角对离心压气机扩压器气动性能及失速机理影响研究 [J ] . 热能动力工程 , 2021 , 36 ( 10 ): 77 - 84 .

HU Chenxing , GENG Kaihe , ZHANG Cheng , et al . Research on the influence of the vane stagger angle on the aerodynamic performance and stall mechanism of centrifugal compressor diffuser [J ] . Journal of Engineering for Thermal Energy and Power , 2021 , 36 ( 10 ): 77 - 84 .

李洲龙 , 朱利民 , ALTINTAS Y . 薄壁曲面零件五轴侧铣加工过程几何-力学仿真及变形误差刀路补偿 [J ] . 金属加工(冷加工) , 2020 ( 11 ): 87 .

LI Zhoulong , ZHU Limin , ALTINTASY Y . Geometric-mechanical simulation and tool path compensation for deformation errors in five-axis side milling of thin-walled curved surface parts [J ] . Metal Working (Metal Cutting) , 2020 ( 11 ): 87 .

王辉 , 吴宝海 , 李小强 . 新一代商用航空发动机叶片的先进加工技术 [J ] . 航空制造技术 , 2014 ( 20 ): 26 - 31 .

WANG Hui , WU Baohai , LI Xiaoqiang . Advanced machining technology of new generation commercial aeroengine blade [J ] . Aeronautical Manufacturing Technology , 2014 ( 20 ): 26 - 31 .

GREINER D , GALVÁN B , PÉRIAUX J , et al . Advances in evolutionary and deterministic methods for design, optimization and control in engineering and sciences [M ] . Cham, Belin : Springer International Publishing , 2015 .

陈慧瀛 , 陆永华 . 三坐标测量在叶轮叶片型面误差检测中的应用 [J ] . 中国机械 , 2024 ( 10 ): 45 - 48 .

CHEN Huiying , LU Yonghua . Application of three-dimensional measurement in rotor blade profile error detection [J ] . Machine China , 2024 ( 10 ): 45 - 48 .

GARZON V E . Probabilistic aerothermal design of compressor airfoils [D ] . Cambridge, MA, USA : Massachusetts Institute of Technology , 2003 .

LEJON M , ANDERSSON N , ELLBRANT L , et al . The impact of manufacturing variations on performance of a transonic axial compressor rotor [C ] // ASME Turbo Expo 2018: Turbomachinery Technical Conference and Exposition . New York, USA : ASME , 2018 : V02AT39A028 .

刘佳鑫 , 于贤君 , 孟德君 , 等 . 高压压气机出口级叶型加工偏差特征及其影响 [J ] . 航空学报 , 2021 , 42 ( 2 ): 342 - 358 .

LIU Jiaxin , YU Xianjun , MENG Dejun , et al . State and effect of manufacture deviations of compressor blade in high-pressure compressor outlet stage [J ] . Acta Aeronautica et Astronautica Sinica , 2021 , 42 ( 2 ): 342 - 358 .

张伟昊 , 邹正平 , 李维 , 等 . 叶型偏差对涡轮性能影响的非定常数值模拟研究 [J ] . 航空学报 , 2010 , 31 ( 11 ): 2130 - 2138 .

ZHANG Weihao , ZOU Zhengping , LI Wei , et al . Unsteady numerical simulation investigation of effect of blade profile deviation on turbine performance [J ] . Acta Aeronautica et Astronautica Sinica , 2010 , 31 ( 11 ): 2130 - 2138 .

李玉 , 楚武利 , 姬田园 . 叶片安装角偏差对动叶性能影响的不确定性研究 [J ] . 西安交通大学学报 , 2023 , 57 ( 4 ): 49 - 59 .

LI Yu , CHU Wuli , JI Tianyuan . Uncertainty research of effects of blade stagger angle deviation on the performance of rotor [J ] . Journal of Xi'an Jiaotong University , 2023 , 57 ( 4 ): 49 - 59 .

LANGE A , VOIGT M , VOGELER K , et al . Probabilistic CFD simulation of a high-pressure compressor stage taking manufacturing variability into account [C ] // ASME Turbo Expo 2010: Power for Land, Sea, and Air . New York, USA : ASME , 2010 : 617 - 628 .

LEBELE-ALAWA B T , HART H I , OGAJI S O T , et al . Rotor-blades' profile influence on a gas-turbine's compressor effectiveness [J ] . Applied Energy , 2008 , 85 ( 6 ): 494 - 505 .

王浩浩 , 高丽敏 , 杨光 , 等 . 钝头前缘加工不确定性对亚声速压气机叶型气动性能的影响 [J ] . 航空动力学报 , 2024 , 39 ( 2 ): 171 - 181 .

WANG Haohao , GAO Limin , YANG Guang , et al . Influence of manufacturing uncertainty of blunt leading edge on aerodynamic performance of compressor blade [J ] . Journal of Aerospace Power , 2024 , 39 ( 2 ): 171 - 181 .

孟德君 , 史文斌 , 刘佳鑫 , 等 . 几何偏差对可控扩散叶型性能影响规律及机理 [J ] . 航空学报 , 2024 , 45 ( 19 ): 23 - 33 .

MENG Dejun , SHI Wenbin , LIU Jiaxin , et al . Influence of geometric variation on aerodynamic performance of controlled diffusion airfoil [J ] . Acta Aeronautica et Astronautica Sinica , 2024 , 45 ( 19 ): 23 - 33 .

高丽敏 , 王浩浩 , 杨光 , 等 . 关于叶片前缘加工缺陷及气动合格性的探讨 [J ] . 推进技术 , 2023 , 44 ( 1 ): 76 - 85 .

GAO Limin , WANG Haohao , YANG Guang , et al . Discussion on machining defects of blade leading edge and aerodynamic qualification [J ] . Journal of Propulsion Technology , 2023 , 44 ( 1 ): 76 - 85 .

翟益琛 , 楚武利 , 刘铠烨 , 等 . 全局叶型扭转角误差对轴流压气机性能影响的不确定性量化分析方法 [J ] . 西安交通大学学报 , 2025 , 59 ( 3 ): 110 - 123 .

ZHAI Yichen , CHU Wuli , LIU Kaiye , et al . Uncertainty quantification method on the influence of global blade twist angle errors on axial compressor performance [J ] . Journal of Xi'an Jiaotong University , 2025 , 59 ( 3 ): 110 - 123 .

姜戴宇 , 王宏光 , 韩铁鹰 . 基于Krain离心压气机叶轮的叶型优化 [J ] . 节能技术 , 2019 , 37 ( 2 ): 161 - 165 .

JIANG Daiyu , WANG Hongguang , HAN Tieying . Blade profile optimization based on Krain centrifugal compressor impeller [J ] . Energy Conservation Technology , 2019 , 37 ( 2 ): 161 - 165 .

席光 , 唐永洪 , 田玉宝 , 等 . 任意空间曲面三元叶轮叶片厚度对气动性能的影响 [J ] . 工程热物理学报 , 2020 , 41 ( 2 ): 354 - 360 .

XI Guang , TANG Yonghong , TIAN Yubao , et al . Effect of blade thickness on aerodynamic performance of three-dimensional impeller with arbitrary spatial surface [J ] . Journal of Engineering Thermophysics , 2020 , 41 ( 2 ): 354 - 360 .

郭红涛 , 樊宏周 , 席光 . 离心叶片进出口几何形状对气动性能影响研究 [J ] . 西安交通大学学报 , 2023 , 57 ( 6 ): 181 - 190 .

GUO Hongtao , FAN Hongzhou , XI Guang . Impact of inlet and outlet geometry of centrifugal blade on aerodynamic performance [J ] . Journal of Xi'an Jiaotong University , 2023 , 57 ( 6 ): 181 - 190 .

雷伟鹏 , 樊宏周 , 雍建华 , 等 . 叶片加工误差对压气机性能影响研究综述 [J ] . 风机技术 , 2024 , 66 ( 2 ): 87 - 92 .

LEI Weipeng , FAN Hongzhou , YONG Jianhua , et al . Summary of research on the influence of blade machining errors on compressor performance [J ] . Chinese Journal of Turbomachinery , 2024 , 66 ( 2 ): 87 - 92 .

KRAIN H . Swirling impeller flow [J ] . Journal of Turbomachinery , 1988 , 110 ( 1 ): 122 - 128 .

席光 . 关于Krain实验叶轮几何型线及其流道二次流旋涡结构的讨论 [J ] . 工程热物理学报 , 2000 , 21 ( 4 ): 440 - 442 .

XI Guang . Discussion on the geometry and the secondary flow vortex structure of Krain's experimental compressor impeller [J ] . Journal of Engineering Thermophysics , 2000 , 21 ( 4 ): 440 - 442 .

陈亚莉 , 孙中国 , 唐永洪 , 等 . 叶端加不同小翼对Krain离心叶轮气动性能影响的数值研究 [J ] . 西安交通大学学报 , 2019 , 53 ( 11 ): 49 - 55 .

CHEN Yali , SUN Zhongguo , TANG Yonghong , et al . Numerical investigation on the effect of blade tip winglets on the aerodynamic performance of Krain centrifugal impeller [J ] . Journal of Xi'an Jiaotong University , 2019 , 53 ( 11 ): 49 - 55 .

XIANG Hang , CHEN Jiang , CHENG Jinxin , et al . Blade number selection for a splittered mixed-flow compressor impeller using improved loss model [J ] . International Journal of Turbo & Jet-Engines , 2022 , 39 ( 4 ): 549 - 564 .

中国航空工业总公司 . 叶片叶型的标注、公差与叶身表面粗糙度：HB 5647-98 [S ] . 北京 : 中国标准出版社 , 1998 .

高丽敏 , 杨光 , 王浩浩 , 等 . 波纹对高亚音叶型气动敏感位置和宽度研究 [J ] . 工程热物理学报 , 2023 , 44 ( 1 ): 78 - 85 .

GAO Limin , YANG Guang , WANG Haohao , et al . Research on the aerodynamic sensitive position and width of waviness on the high subsonic profile [J ] . Journal of Engineering Thermophysics , 2023 , 44 ( 1 ): 78 - 85 .

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

仿生圆弧微槽对离心叶轮气动性能影响的数值研究

轮盖开孔的离心风机流场研究

串列叶片式离心叶轮内流场的数值研究

射流式漩涡发生器对离心叶轮性能的影响

采用遗传算法的离心叶轮多目标自动优化设计