间隙阻尼结构对轮缘密封封严效率和气动性能影响的数值研究

雷隆; 屈杰; 高庆; 李志刚; 李军

doi:10.7652/xjtuxb202505014

您当前的位置：

首页 >

文章列表页 >

间隙阻尼结构对轮缘密封封严效率和气动性能影响的数值研究

—————————————————————— | 更新时间：2025-08-26

- 间隙阻尼结构对轮缘密封封严效率和气动性能影响的数值研究
- Numerical Study on Effects of Clearance-Damping Structure on the Sealing Effectiveness and Aerodynamic Performance of Rim Seal
- 西安交通大学学报 2025年59卷第5期页码：143-155
- 作者机构：
  
  1.西安热工研究院有限公司西安西热节能技术有限公司， 710054，西安
  2.西安交通大学叶轮机械研究所， 710049，西安
  3.高效灵活煤电及碳捕集利用封存全国重点实验室， 102209，北京
- 作者简介：
  
  雷隆（1998—），男，助理工程师；
  李军（通信作者），男，教授，博士生导师。
- 基金信息：
  
  国家科技重大专项资助项目(J2019-Ⅱ-0010-0030)
- DOI：10.7652/xjtuxb202505014
  中图分类号： TK474.7
- 收稿：2024-11-05，
  
  网络首发：2025-01-09，
  
  纸质出版：2025-05-10
- 稿件说明：
移动端阅览
雷隆, 屈杰, 高庆, 等. 间隙阻尼结构对轮缘密封封严效率和气动性能影响的数值研究[J]. 西安交通大学学报, 2025,59(5):143-155.

LEI Long, QU Jie, GAO Qing, et al. Numerical Study on Effects of Clearance-Damping Structure on the Sealing Effectiveness and Aerodynamic Performance of Rim Seal[J]. Journal of Xi’an Jiaotong University, 2025, 59(5): 143-155.
雷隆, 屈杰, 高庆, 等. 间隙阻尼结构对轮缘密封封严效率和气动性能影响的数值研究[J]. 西安交通大学学报, 2025,59(5):143-155. DOI： 10.7652/xjtuxb202505014.

LEI Long, QU Jie, GAO Qing, et al. Numerical Study on Effects of Clearance-Damping Structure on the Sealing Effectiveness and Aerodynamic Performance of Rim Seal[J]. Journal of Xi’an Jiaotong University, 2025, 59(5): 143-155. DOI： 10.7652/xjtuxb202505014.

摘要

为提高燃气轮机透平轮缘密封封严效率，以某型燃气透平第一级动静叶栅和动叶前盘腔轮缘密封为研究对象，设计了4种间隙阻尼轮缘密封结构，在5种工况下对比了原始结构和4种间隙阻尼结构的封严效率、非定常流动特征和盘腔下游动叶通道出口的总压损失系数。结果表明：在5种工况下，4种间隙阻尼结构的封严效率均优于原始结构，间隙内动盘凸肩结构的封严效率最高，其次为静盘凸肩动盘凹槽结构；与原始结构相比，5种工况下动盘凸肩结构在外腔静盘面测点处封严效率分别提高了47.1%、51.6%、32.4%、25.4%和26.2%；从流动机理角度分析，凸肩结构缩短了轮缘间隙长度，限制了燃气入侵通流面积，同时凸肩结构内的微小通道内形成了许多涡系，增大了燃气向内入侵的流动阻力，使封严效率大幅提高；在5种工况下，动盘凸肩结构在动叶栅出口端部的总压损失系数与原始结构相比分别增大了2.2%、1.6%、1.6%、2.5%和3.0%，相较于该结构大幅提高盘腔封严效率的表现而言，增加的气动损失相对较小。

Abstract

In order to further improve the sealing effectiveness of rim seals in gas turbines

with the focus of the stationary and rotating blade cascades of the first stage

as well as the rim seal of the front disk cavity of the moving blades in a certain type of gas turbine

four clearance-damping rim seal structures are designed. Under five seal coolant flow rate operating conditions

the sealing effectiveness

unsteady flow characteristics

and total pressure loss coefficient at the downstream moving blade passage of the original structure and the four clearance-damping structures were compared. The results show that under the five operating conditions

the sealing effectiveness of the four clearance-damping structures is superior to that of the original structure. The rotor protruding shoulder structure in the clearance exhibits the best sealing performance

followed by the stator protruding shoulder structure and the rotor groove structure. Compared with the original structure

under the five operating conditions

the average sealing effectiveness of the rotor protruding shoulder structure at the monitoring point on stator surface of the outer cavity increases by 47.1%

51.6%

32.4%

25.4%

26.2%

respectively. From the perspective of the flow mechanism

the protruding shoulder structure shortens the rim clearance length and restricts the flow area for gas ingestion. Meanwhile

numerous vortices form within the micro-channels of the protruding shoulder structure

increasing the flow resistance for gas ingestion inward

thereby significantly improving the sealing effectiveness. Under the five operating conditions

the total pressure loss coefficients at the blade cascade exit endwall region for the rotor protruding shoulder structure increase by 2.2%

1.6%

2.5%

3.0%

respectively

compared with the original structure. Compared with the significant improvement in cavity sealing effectiveness achieved by this structure

its impact on aerodynamic losses is relatively small.

关键词

Keywords

references

SANGAN C M , LALWANI Y , OWEN J M , et al . Experimental measurements of ingestion through turbine rim seals: part 5 fluid dynamics of wheel-space [C ] // ASME Turbo Expo 2013: Turbine Technical Conference and Exposition . New York, USA : ASME , 2013 : V03AT15A003 .

SCOBIE J A , SANGAN C M , TEUBER R , et al . Experimental measurements of ingestion through turbine rim seals: part 4 off-design conditions [C ] // ASME Turbo Expo 2013: Turbine Technical Conference and Exposition . New York, USA : ASME , 2013 : V03AT15A002 .

吴康 , 任静 , 蒋洪德 . 整级透平中转静轮缘封严问题研究：Part Ⅱ 不同封严结构的特性 [J ] . 工程热物理学报 , 2015 , 36 ( 3 ): 496 - 500 .

WU Kang , REN Jing , JIANG Hongde . Rotor-stator rim seal analysis in one stage gas turbine: part Ⅱ characteristic of different seal structure [J ] . Journal of Engineering Thermophysics , 2015 , 36 ( 3 ): 496 - 500 .

陶加银 , 高庆 , 宋立明 , 等 . 基于附加示踪变量法的涡轮轮缘密封非定常封严特性研究 [J ] . 工程热物理学报 , 2014 , 35 ( 11 ): 2154 - 2158 .

TAO Jiayin , GAO Qing , SONG Liming , et al . Numerical investigations on the unsteady mainstream ingestion characteristics of turbine rim seals with additional passive tracer method [J ] . Journal of Engineering Thermophysics , 2014 , 35 ( 11 ): 2154 - 2158 .

XIE Lei , WANG Ruonan , LIU Guang , et al . Numerical investigation on unsteady characteristics in different rim seal geometries: part A [C ] // ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition . New York, USA : ASME , 2020 : V07CT14A013 .

CONG Qingfeng , ZHANG Kaiyuan , LI Zhigang , et al . Numerical investigations on gas ingestion mechanism based on flow instabilities in rim seal and cooling characteristics of endwall in a 1.5-stage axial turbine [J ] . Journal of Engineering for Gas Turbines and Power , 2023 , 145 ( 5 ): 051001 .

JUANGPHANICH P , PANIAGUA G . Aero-thermal optimization of the rim seal cavity to enhance rotor platform thermal protection [J ] . International Journal of Turbo & Jet-Engines , 2023 , 40 ( 1 ): 59 - 70 .

LEE S , KIM D , PARK J Y . Harmonisation of coolant flow pattern with wake of stator vane to improve sealing effectiveness using a wave-shaped rim seal [J ] . Energies , 2019 , 12 ( 6 ): 1060 .

CHO G H , SANGAN C M , OWEN J M , et al . Effect of ingress on turbine disks [J ] . Journal of Engineering for Gas Turbines and Power , 2016 , 138 ( 4 ): 042502 .

POPOVÍC I , HODSON H P . Improving turbine stage efficiency and sealing effectiveness through modifications of the rim seal geometry [J ] . Journal of Turbomachinery , 2013 , 135 ( 6 ): 061016 .

ZHANG Qingcai , WANG Qinqin , TAN Xiaoming , et al . Unsteady numerical investigation on the sealing effectiveness and flow field in different rim seal geometries [J ] . Aerospace , 2022 , 9 ( 12 ): 780 .

ZHANG Ziqing , ZHANG Yingjie , DONG Xu , et al . Flow mechanism between purge flow and mainstream in different turbine rim seal configurations [J ] . Chinese Journal of Aeronautics , 2020 , 33 ( 8 ): 2162 - 2175 .

ZHANG Ziqing , ZHANG Yanfeng , ZHANG Yingjie , et al . Numerical investigation of the purge flow mechanisms and heat-transfer characteristics of turbine rim seals [J ] . Case Studies in Thermal Engineering , 2022 , 40 : 102484 .

周小兵 , 吴艳辉 , 郭鑫 , 等 . 高压涡轮圆柱孔状径向轮缘密封封严特性的数值研究 [J ] . 推进技术 , 2022 , 43 ( 2 ): 161 - 170 .

ZHOU Xiaobing , WU Yanhui , GUO Xin , et al . Numerical study on sealing characteristics of high-pressure turbine cylindrical hole radial rim seal [J ] . Journal of Propulsion Technology , 2022 , 43 ( 2 ): 161 - 170 .

SCOBIE J A , TEUBER R , LI Yansheng , et al . Design of an improved turbine rim-seal [J ] . Journal of Engineering for Gas Turbines and Power , 2016 , 138 ( 2 ): 022503 .

高庆 , 李军 . 涡轮蜂窝面径向轮缘密封封严性能的数值研究 [J ] . 推进技术 , 2016 , 37 ( 5 ): 937 - 944 .

GAO Qing , LI Jun . Numerical investigations on sealing performance of turbine honeycomb radial rim seal [J ] . Journal of Propulsion Technology , 2016 , 37 ( 5 ): 937 - 944 .

LI Jun , GAO Qing , LI Zhigang , et al . Numerical investigations on the sealing effectiveness of turbine honeycomb radial rim seal [J ] . Journal of Engineering for Gas Turbines and Power , 2016 , 138 ( 10 ): 102601 .

CHENG Shuxian , LI Zhigang , LI Jun , et al . Numerical investigations on the sealing effectiveness of turbine groove radial rim seal [C ] // ASME Turbo Expo 2019: Turbomachinery Technical Conference and Exposition . New York, USA : ASME , 2019 : V05BT15A002 .

程舒娴 . 燃气透平轮缘密封的流动特性与封严效率和非定常燃气入侵机理研究 [D ] . 西安 : 西安交通大学 , 2020 .

REID K , DENTON J , PULLAN G , et al . The effect of stator-rotor hub sealing flow on the mainstream aerodynamics of a turbine [C ] // ASME Turbo Expo 2006: Power for Land, Sea, and Air . New York, USA : ASME , 2006 : 789 - 798 .

MCLEAN C , CAMCI C , GLEZER B . Mainstream aerodynamic effects due to wheelspace coolant injection in a high-pressure turbine stage: part Ⅰ aerodynamic measurements in the stationary frame [J ] . Journal of Turbomachinery , 2001 , 123 ( 4 ): 687 - 696 .

MCLEAN C , CAMCI C , GLEZER B . Mainstream aerodynamic effects due to wheelspace coolant injection in a high-pressure turbine stage: part Ⅱ aerodynamic measurements in the rotational frame [J ] . Journal of Turbomachinery , 2001 , 123 ( 4 ): 697 - 703 .

高庆 , 李军 . 间隙结构对轮缘密封封严性能及透平级气动性能影响的数值研究 [J ] . 西安交通大学学报 , 2015 , 49 ( 3 ): 25 - 31 .

GAO Qing , LI Jun . Numerical investigations for effects of turbine rim seal configurations on sealing effectiveness and aerodynamic performance of turbine stage [J ] . Journal of Xi'an Jiaotong University , 2015 , 49 ( 3 ): 25 - 31 .

高庆 , 屈杰 , 马汀山 , 等 . 轴向轮缘密封导流段几何结构对涡轮级气动冷却特性影响的数值研究 [J ] . 西安交通大学学报 , 2019 , 53 ( 9 ): 26 - 33 .

GAO Qing , QU Jie , MA Tingshan , et al . Numerical investigation on the effects of rim seal diversion configurations on aerodynamic and film cooling performances of turbine stage [J ] . Journal of Xi'an Jiaotong University , 2019 , 53 ( 9 ): 26 - 33 .

ZHANG Qingcai , TAN Xiaoming , WANG Qinqin , et al . Numerical investigation on effects of egress flow through different rim seals [J ] . Thermal Science and Engineering Progress , 2023 , 38 : 101648 .

CHILLA M , HODSON H P , PULLAN G , et al . High-pressure turbine rim seal design for increased efficiency [C ] // ASME Turbo Expo 2016: Turbomachinery Technical Conference and Exposition . New York, USA : ASME , 2016 : V02BT38A046 .

SCHÄFLEIN L , JANSSEN J , BRANDIES H , et al . Influence of purge flow injection on the performance of an axial turbine with three-dimensional airfoils and non-axisymmetric endwall contouring [J ] . Journal of Turbomachinery , 2023 , 145 ( 6 ): 061004 .

POPOVIĆ I , HODSON H P . Aerothermal impact of the interaction between hub leakage and mainstream flows in highly-loaded high pressure turbine blades [J ] . Journal of Turbomachinery , 2013 , 135 ( 6 ): 061014 .

雷隆 , 丛庆丰 , 郭粲 , 等 . 1.5级燃气透平轮缘密封非定常流动特征和封严效率的数值研究 [J ] . 西安交通大学学报 , 2023 , 57 ( 10 ): 64 - 77 .

LEI Long , CONG Qingfeng , GUO Can , et al . Numerical investigation on the unsteady flow characteristics and sealing effectiveness of rim seals in a 1.5-stage gas turbine [J ] . Journal of Xi'an Jiaotong University , 2023 , 57 ( 10 ): 64 - 77 .

SCOBIE J A , HUALCA F P , PATINIOS M , et al . Re-ingestion of upstream egress in a 1.5-stage gas turbine rig [J ] . Journal of Engineering for Gas Turbines and Power , 2018 , 140 ( 7 ): 072507 .

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

间隙变化对轮缘密封泄漏流动特性的影响

燃气透平轮缘密封流动特性和气动性能

1.5级燃气透平轮缘密封非定常流动特征和封严效率的数值研究

前缘双层壁结构的涡轮静叶冷却性能和压力损失特性研究

离散气膜孔与间隙冷气掺混作用下燃气透平叶栅端壁气动特性研究