脉冲束流下车载加速器中子源靶传热特性

胡耀程; 范晶晶; 谢宇鹏; 李晓博; 李竞伦; 张凡曦; 苏浩泉; 孙秋宇; 杨一帆; 李海鹏; 王盛

doi:10.7652/xjtuxb202407008

您当前的位置：

首页 >

文章列表页 >

脉冲束流下车载加速器中子源靶传热特性

—————————————————————— | 更新时间：2025-07-28

- 脉冲束流下车载加速器中子源靶传热特性
- Heat Transfer Characteristics of Transportable Accelerator Neutron Source Targets under Pulsed Beam
- 西安交通大学学报 2024年58卷第7期页码：84-93
- 作者机构：
  
  1. 西安交通大学核科学与技术学院,西安,710049
  2. 西安交通大学湖州中子科学实验室,浙江,湖州,313000
  3. 华硼中子科技(杭州)有限公司,杭州,310000
- 作者简介：
  
  : 2023-12-20。作者简介: 胡耀程(1997—),男,博士生
  李海鹏(通信作者),男,助理教授。基金项目: 国家自然科学基金资助项目(12375159,1210050454)
- 基金信息：
  
  : 2023-12-20。作者简介: 胡耀程(1997—),男,博士生;李海鹏(通信作者),男,助理教授。基金项目: 国家自然科学基金资助项目(12375159,1210050454);广东省基础与应用基础研究基金资助项目(2020B1515120035)
- DOI：10.7652/xjtuxb202407008
  中图分类号： O571.53
- 网络首发：2024-07-10，
  
  纸质出版：2024
- 稿件说明：
移动端阅览
胡耀程, 范晶晶, 谢宇鹏, 等. 脉冲束流下车载加速器中子源靶传热特性[J]. 西安交通大学学报, 2024,58(7):84-93.

HU Yaocheng, FAN Jingjing, XIE Yupeng, et al. Heat Transfer Characteristics of Transportable Accelerator Neutron Source Targets under Pulsed Beam[J]. 2024, 58(7): 84-93.
胡耀程, 范晶晶, 谢宇鹏, 等. 脉冲束流下车载加速器中子源靶传热特性[J]. 西安交通大学学报, 2024,58(7):84-93. DOI： 10.7652/xjtuxb202407008.

HU Yaocheng, FAN Jingjing, XIE Yupeng, et al. Heat Transfer Characteristics of Transportable Accelerator Neutron Source Targets under Pulsed Beam[J]. 2024, 58(7): 84-93. DOI： 10.7652/xjtuxb202407008.

摘要

为了研究不同脉冲束流频率下车载加速器中子源靶的传热特性及其热动态响应

通过调整脉冲束流的频率或脉宽对背部冷却微通道靶的传热性能进行模拟

并通过分析靶内部结构的热沉积分布

探究车载加速器中子源靶的热负载上限以及制约束流的因素。选用能量为2.5 MeV、峰值流强为10 mA的束流开展模拟

结果表明:当束流占空比保持在3%不变时

靶的最高温度呈周期波动

且存在上下包络; 随着束流频率的上升

每个脉冲周期内靶的上包络温度逐渐下降

这是由于每个脉冲期间的热冲击下降所导致的; 频率上升时

每个周期内加热时间与冷却时间同时缩短

导致其下包络温度在最开始增大后基本保持不变; 靶的最高温度随着束流频率增加出现从锂层到中间层钽层的转移。该研究对于车载加速器中子源的束流参数选择和靶冷却设计具有一定的参考价值。

Abstract

To investigate the heat transfer characteristics and thermal dynamic response of transportable accelerator neutron source targets under different pulsed beam frequencies

this paper simulates the heat transfer performance of the back-cooling microchannel target by adjusting the frequency or pulse width of the pulsed beam. Additionally

the thermal deposition distribution within the target structure is examined to explore the thermal load limits of the transportable accelerator neutron source targets and the factors that restrict the beam. The results reveal that when using a 2.5 MeV beam with a peak current of 10 mA and a constant duty cycle of 3%

the highest temperature of the target exhibits periodic fluctuations due to the pulsed beam

displaying upper and lower envelopes. With an increase in beam frequency

the upper envelope temperature of the target gradually decreases within each pulse period because of the reduced thermal shock. However

as the frequency increases

the heating time and cooling time within each period shorten simultaneously

leading to the lower envelope temperature of the target maintaining a relatively constant level after an initial increase. Moreover

the highest temperature of the target shifts from the lithium layer to the tantalum interlayer as the beam frequency increases. This study holds significant reference value for the selection of beam parameters and target cooling designs in transportable accelerator neutron sources.

关键词

Keywords

references

杨安波, 弋然. 中子照相技术及其发展和应用 [J]. 科学技术创新, 2023(12): 22-25.

YANG Anbo, YI Ran. The development and application of neutron radiography [J]. Scientific and Technological Innovation, 2023(12): 22-25.

BANHART J. Advanced tomographic methods in materials research and engineering [M]. Oxford: Oxford University Press, 2008.

LI Haipeng, WANG Zhi, LU Yuanrong, et al. Design and study of a continuous wave RFQ for the BISOL high intensity deuteron driver linac [J]. Journal of Instrumentation, 2020, 15(5): T05003.

王胜, 尹伟, 刘斌, 等. 基于可移动紧凑加速器D-T中子源的热中子层析实验研究 [J]. 原子能科学技术, 2019, 53(4): 739-746.

WANG Sheng, YIN Wei, LIU Bin, et al. Experimental study of thermal neutron tomography based on D-T neutron source with mobile compact accelerator [J]. Atomic Energy Science and Technology, 2019, 53(4): 739-746.

王捷, 李雅男, 李桃生, 等. 14 MeV快中子照相准直屏蔽系统的设计与优化 [J]. 原子能科学技术, 2019, 53(6): 1105-1111.

WANG Jie, LI Yanan, LI Taosheng, et al. Design and optimization of shielding collimator system for 14 MeV fast neutron radiography [J]. Atomic Energy Science and Technology, 2019, 53(6): 1105-1111.

于筱雪, 王俊润, 刘兴宇, 等. 基于紧凑型D-D中子发生器的热中子照相慢化准直器设计 [J]. 原子核物理评论, 2023, 40(2): 251-256.

YU Xiaoxue, WANG Junrun, LIU Xingyu, et al. Design of moderator-collimator for thermal neutron radiography based on compact D-D neutron generator [J]. Nuclear Physics Review, 2023, 40(2): 251-256.

ANDERSON I S, ANDREANI C, CARPENTER J M, et al. Research opportunities with compact accelerator-driven neutron sources [J]. Physics Reports, 2016, 654: 1-58.

ZOU Yubin, WEN Weiwei, GUO Zhiyu, et al. PKUNIFTY: a neutron imaging facility based on an RFQ accelerator [J]. Nuclear Instruments and Methods in Physics Research: Section A Accelerators, Spectrometers, Detectors and Associated Equipment, 2011, 651(1): 62-66.

KOBAYASHI T, IKEDA S, OTAKE Y, et al. Completion of a new accelerator-driven compact neutron source prototype RANS-II for on-site use [J]. Nuclear Instruments and Methods in Physics Research: Section A Accelerators, Spectrometers, Detectors and Associated Equipment, 2021, 994: 165091.

林作康, 杨璞, 赵乾坤, 等. AB-BNCT中子靶物理设计分析 [J]. 原子能科学技术, 2020, 54(5): 804-810.

LIN Zuokang, YANG Pu, ZHAO Qiankun, et al. Analysis of physical design for AB-BNCT neutron target [J]. Atomic Energy Science and Technology, 2020, 54(5): 804-810.

江桥月, 王艺璇, 彭锦秋, 等. 厚靶低中能9Be(d, xn)反应加速器中子源特性研究 [J]. 原子核物理评论, 2022, 39(3): 396-404.

JIANG Qiaoyue, WANG Yixuan, PENG Jinqiu, et al. Research on the accelerator neutron source characteristics based on 9Be(d, xn)reaction with thick target in the low and medium energy range [J]. Nuclear Physics Review, 2022, 39(3): 396-404.

LI Xiaobo, IKEDA Y, KOBAYASHI T, et al. Study on the edge-cooling target structure for transportable accelerator-driven neutron source [J]. Nuclear Instruments and Methods in Physics Research: Section A Accelerators, Spectrometers, Detectors and Associated Equipment, 2021, 1017: 165793.

HU Yaocheng, LI Xiaobo, LÜ Yongsheng, et al. Simulations on the thermal and mechanical performance of the rotating target system of accelerator-driven neutron source for boron neutron capture therapy(BNCT)[J]. Nuclear Instruments and Methods in Physics Research: Section A Accelerators, Spectrometers, Detectors and Associated Equipment, 2023, 1053: 168340.

YAMAGATA Y, HIROTA K, JU J, et al. Development of a neutron generating target for compact neutron sources using low energy proton beams [J]. Journal of Radioanalytical and Nuclear Chemistry, 2015, 305(3): 787-794.

ASTRELIN V T, BURDAKOV A V, BYKOV P V, et al. Blistering of the selected materials irradiated by intense 200 keV proton beam [J]. Journal of Nuclear Materials, 2010, 396(1): 43-48.

BYKOV T, GOLOSHEVSKII N, GROMILOV S, et al. In situ study of the blistering effect of copper with a thin lithium layer on the neutron yield in the 7Li(p, n)7Be reaction [J]. Nuclear Instruments and Methods in Physics Research: Section B Beam Interactions with Materials and Atoms, 2020, 481: 62-81.

BADRUTDINOV A, BYKOV T, GROMILOV S, et al.In situ observations of blistering of a metal irradiated with 2-MeV protons [J]. Metals, 2017, 7(12): 558.

XIE Yupeng, SUN Qiuyu, HU Yaocheng, et al. Effect of magnetron sputtering power on structure and properties of Ta films on Cu substrate of neutron production target for accelerator-based Boron neutron capture therapy(AB-BNCT)[J]. Vacuum, 2024, 219: 112678.

ZIEGLER J F. SRIM [EB/OL]. [2023-10-15]. http://www.srim.org.

KUMAWAT H, DUTTA D, MANTHA V, et al. Heat deposition in thick targets due to interaction of high energy protons and thermal hydraulics analysis [J]. Nuclear Instruments and Methods in Physics Research: Section B Beam Interactions with Materials and Atoms, 2008, 266(4): 604-612.

NAKAMURA S, IGAKI H, ITO M, et al. Characterization of the relationship between neutron production and thermal load on a target material in an accelerator-based boron neutron capture therapy system employing a solid-state Li target [J]. PLoS One, 2019, 14(11): e0225587.

NAKAMURA S, IGAKI H, OKAMOTO H, et al. Dependence of neutrons generated by 7Li(p, n)reaction on Li thickness under free-air condition in accelerator-based boron neutron capture therapy system employing solid-state Li target [J]. Physica Medica, 2019, 58: 121-130.

李晓博, 胡耀程, 范晶晶, 等. 用于车载加速器中子源的边缘冷却靶结构研究 [J]. 西安交通大学学报, 2023, 57(6): 160-171.

LI Xiaobo, HU Yaocheng, FAN Jingjing, et al. Study of edge-cooling target structure for transportable accelerator-driven neutron source [J]. Journal of Xi'an Jiaotong University, 2023, 57(6): 160-171.

潘瑶, 刘欣, 巩萌萌. 射流微通道耦合高效散热器传热实验研究 [J]. 太赫兹科学与电子信息学报, 2023, 21(11): 1397-1402.

PAN Yao, LIU Xin, GONG Mengmeng. Experimental research on heat transfer characteristics of micro-channel/jet impingement heat sink [J]. Journal of Terahertz Science and Electronic Information Technology, 2023, 21(11): 1397-1402.

赵博, 张斌, 陈叔平, 等. 射频四极场加速器腔体多物理场分析 [J]. 核技术, 2020, 43(3): 7-12.

ZHAO Bo, ZHANG Bin, CHEN Shuping, et al. Multi-physics field coupling analysis of radio frequency quadrupole cavity [J]. Nuclear Techniques, 2020, 43(3): 7-12.

LI Haipeng, SU Haoquan, LV Yongsheng, et al. Design of a compact RFQ linac for the transportable neutron source [J]. Nuclear Instruments and Methods in Physics Research: Section A Accelerators, Spectrometers, Detectors and Associated Equipment, 2022, 1042: 167254.[27] LI Haipeng, WANG Zhi, LU Yuanrong, et al. Design of a CW linac for the compact intense fast neutron facility [J]. Nuclear Instruments and Methods in Physics Research: Section A Accelerators, Spectrometers, Detectors and Associated Equipment, 2019, 930: 156-166.

YOSHIHASHI S, TSUNEYOSHI T, TSUCHIDA K, et al. High heat removal technique for a lithium neutron generation target used for an accelerator-driven BNCT system [J]. Journal of Instrumentation, 2021, 16(4): P04016.

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

马赫数与肩壁尾切对涡轮转子叶尖气动损失与传热特性的影响研究

超临界压力水在倾斜上升管内传热的试验研究

环形通道内超临界水的传热特性研究

电主轴轴心冷却用环路热虹吸管的传热特性

空心静叶蒸汽加热除湿传热特性的研究