水平柱群通道全氟己酮过冷沸腾传热特性研究

胡斌; 齐迪; 徐永生; 林梅

doi:10.7652/xjtuxb202310011

您当前的位置：

首页 >

文章列表页 >

水平柱群通道全氟己酮过冷沸腾传热特性研究

—————————————————————— | 更新时间：2025-05-08

- 水平柱群通道全氟己酮过冷沸腾传热特性研究
- Study on Subcooled Flow Boiling Heat Transfer Characteristics of Novec 649 in a Horizontal Finned Channel
- 西安交通大学学报 2023年57卷第10期页码：111-120
- 作者机构：
  
  1. 西安交通大学能源与动力工程学院,西安,710049
  2. 南方电网科学研究院有限责任公司直流输电技术国家重点实验室,广州,510080
- 作者简介：
  
  : 2023-04-05。作者简介: 胡斌(2000—),男,硕士生
  林梅(通信作者),女,研究员。基金项目: 国家自然科学基金资助项目(51876146)。
- 基金信息：
  
  : 2023-04-05。作者简介: 胡斌(2000—),男,硕士生;林梅(通信作者),女,研究员。基金项目: 国家自然科学基金资助项目(51876146)。
- DOI：10.7652/xjtuxb202310011
  中图分类号： TK124
- 网络首发：2023-10-10，
  
  纸质出版：2023
- 稿件说明：
移动端阅览
胡斌, 齐迪, 徐永生, 等. 水平柱群通道全氟己酮过冷沸腾传热特性研究[J]. 西安交通大学学报, 2023,57(10):111-120.

HU Bin, QI Di, XU Yongsheng, et al. Study on Subcooled Flow Boiling Heat Transfer Characteristics of Novec 649 in a Horizontal Finned Channel[J]. 2023, 57(10): 111-120.
胡斌, 齐迪, 徐永生, 等. 水平柱群通道全氟己酮过冷沸腾传热特性研究[J]. 西安交通大学学报, 2023,57(10):111-120. DOI： 10.7652/xjtuxb202310011.

HU Bin, QI Di, XU Yongsheng, et al. Study on Subcooled Flow Boiling Heat Transfer Characteristics of Novec 649 in a Horizontal Finned Channel[J]. 2023, 57(10): 111-120. DOI： 10.7652/xjtuxb202310011.

摘要

为提升散热量不断增加的电力电子器件冷却系统的高效换热能力

提出采用全氟己酮为工质的水平双直角五边形肋柱通道流动沸腾换热系统对其进行冷却。通过实验的方法制作了入口当量直径为3.81 mm的五边形柱群通道结构

对通道内流动沸腾的平均及沿程换热特性展开了研究

实验工况如下:壁面热流密度为50～400 kW·m

-2

入口流速为0.1～0.9 m·s

-1

入口过冷度为15～35 ℃。结果表明:当热流密度低于100 kW·m

-2

时

单相对流占主导

增加流速与过冷度能够明显促进壁温降低; 当热流密度高于200 kW·m

-2

时

沸腾吸热占主导

增加流速与过冷度时壁温的降低幅度不明显; 在热流密度为400 kW·m

-2

、过冷度为15 ℃的工况下

柱群通道的平均传热系数最高; 通道沿流向的局部传热系数总体呈现上升趋势

随着热流密度的增大、流速与过冷度的降低

通道出口传热系数相比进口的增长更加显著

此时通道内流体沿流向的沸腾剧烈程度发展速度更快、通道出口的沸腾程度更剧烈。该研究可为水平柱群通道内流动沸腾传热的最佳工况设计提供理论基础。

Abstract

In order to meet the increasing demand for heat dissipation of power electronic device and improve the heat transfer capability of its cooling system

a horizontal flow boiling heat transfer system with double right angle pentagonal pin finned channel using Novec 649 as the working fluid was proposed. A pentagonal pin finned channel structure with an inlet equivalent diameter of 3.81 mm was fabricated to experimentally study the average and local flow boiling

heat transfer characteristics in the pin finned channel. The working conditions are as follows: heat flux ranges from 50 to 400 kW·m

-2

the inlet flow velocity ranges from 0.1 to 0.9 m·s

-1

and the inlet subcooled temperature ranges from 15 to 35 ℃. The results show that when the heat flux is less than 100 kW·m

-2

single-phase convection heat transfer dominates

and increasing the flow velocity and subcooled temperature can significantly reduce the wall temperature. When the heat flux is higher than 200 kW·m

-2

boiling heat transfer dominates

and increasing the flow velocity and subcooled temperature has a slight impact on the reduction of the wall temperature. When the heat flux is 400 kW·m

-2

and subcooled temperature is 15 ℃

the finned channel displays the highest average heat transfer coefficient. Generally speaking

the local heat transfer coefficient along flow direction presents an upward trend. With the increase of heat flux

decrease of the flow velocity and subcooled temperature

the heat transfer coefficient at the outlet of the channel increases more significantly than that at the inlet. At present

the boiling intensity of the fluid in the channel along flow direction develops faster

and the boiling intensity at the outlet also becomes more intense. The study results in this paper can provide a theoretical guidance for the design of flow boiling heat transfer in a horizontal pin finned channel.

关键词

Keywords

references

齐迪. 微细肋柱通道中过冷沸腾及气泡动力学特性研究 [D]. 西安: 西安交通大学, 2022.

RIAZ F, TSO C Y, QIU Huihe, et al. Hybrid nanofluid spray cooling performance and its residue surface effects: toward thermal management of high heat flux devices [J]. Applied Thermal Engineering, 2022, 211: 118454.

黄伟, 冯维, 王海峰, 等. 直流换流阀单元模块蒸发冷却系统的仿真分析与试验 [J]. 电工技术学报, 2017, 32(2): 264-270.

HUANG Wei, FENG Wei, WANG Haifeng, et al. Simulation and experimental study on the evaporative cooling system of HVDC valve unit [J]. Transactions of China Electrotechnical Society, 2017, 32(2): 264-270.

李广义, 张俊洪, 高键鑫. 大功率电力电子器件散热研究综述 [J]. 兵器装备工程学报, 2020, 41(11): 8-14.

LI Guangyi, ZHANG Junhong, GAO Jianxin. Review on heat dissipation of high power electronic devices [J]. Journal of Ordnance Equipment Engineering, 2020, 41(11): 8-14.

胡晓, 林贵平, 王宇鹏, 等. 大功率电力电子设备用微槽道系统实验研究 [J]. 电工电能新技术, 2014, 33(7): 23-27.

HU Xiao, LIN Guiping, WANG Yupeng, et al. Experimental study of flow boiling in microchannel system for high-heat-flux power electronic devices [J]. Advanced Technology of Electrical Engineering and Energy, 2014, 33(7): 23-27.

徐志昊, 李良星, 张拯政. 竖直通道内流动沸腾气泡脱离行为的数据驱动分析 [J]. 西安交通大学学报, 2020, 54(11): 175-184.

XU Zhihao, LI Liangxing, ZHANG Zhengzheng. Data driven analysis for departure behavior characteristics of flow boiling bubbles in the vertical channel [J]. Journal of Xi'an Jiaotong University, 2020, 54(11): 175-184.

罗炜, 贺静, 罗兵, 等. 截面形状对微通道流动沸腾影响的数值研究 [J]. 西安交通大学学报, 2019, 53(11): 101-111.

LUO Wei, HE Jing, LUO Bing, et al. Numerical study on the effect of cross-sectional shape of microchannels on flow boiling [J]. Journal of Xi'an Jiaotong University, 2019, 53(11): 101-111.

NNANNA A G A, RUTHERFORD W, ELOMAR W, et al. Assessment of thermoelectric module with nanofluid heat exchanger [J]. Applied Thermal Engineering, 2009, 29(2/3): 491-500.

宁璐璐, 刘清江, 杨凤, 等. 电子器件冷却技术研究进展 [J]. 制冷与空调, 2021, 21(12): 1-7.

NING Lulu, LIU Qingjiang, YANG Feng, et al. Research progress of electronic device cooling technology [J]. Refrigeration and Air-Conditioning, 2021, 21(12): 1-7.

翁建华, 石梦琦, 崔晓钰. 电子器件冷却用散热器的结构形式与研究进展 [J]. 新技术新工艺, 2017(11): 40-42.

WENG Jianhua, SHI Mengqi, CUI Xiaoyu. Configurations and research progress of heat sinks for electronic device cooling [J]. New Technology New Process, 2017(11): 40-42.

郭栋, 魏进家, 张永海. 方柱微结构芯片射流冲击流动沸腾换热实验研究 [J]. 西安交通大学学报, 2011, 45(1): 31-37.

GUO Dong, WEI Jinjia, ZHANG Yonghai. Experiment of flow boiling heat transfer on micro-pin-finned chips with jet impingement [J]. Journal of Xi'an Jiaotong University, 2011, 45(1): 31-37.

霍福强, 王腾, 严天宇, 等. 矩形双通道饱和沸腾传热特性试验研究 [J]. 西安交通大学学报, 2021, 55(9): 141-151.

HUO Fuqiang, WANG Teng, YAN Tianyu, et al. Experimental study on the saturated boiling heat transfer characteristics of water in parallel rectangular channels [J]. Journal of Xi'an Jiaotong University, 2021, 55(9): 141-151.

MAO Ning, ZHUANG Jiaojiao, HE Tianbiao, et al. A critical review on measures to suppress flow boiling instabilities in microchannels [J]. Heat and Mass Transfer, 2021, 57(6): 889-910.

LI Chong, FANG Xiande, DAI Qiumin. Two-phase flow boiling instabilities: a review [J]. Annals of Nuclear Energy, 2022, 173: 109099.

孙瑞瑞, 张经, 华君叶, 等. 开口结构对微肋阵沸腾换热及气泡动态生长特性的影响 [J]. 制冷学报, 2022, 43(1): 108-115.

SUN Ruirui, ZHANG Jing, HUA Junye, et al. Effect of open structure on boiling heat transfer and bubble dynamic growth characteristics of micro fin array [J]. Journal of Refrigeration, 2022, 43(1): 108-115.

贺静, 齐迪, 林梅, 等. 肋柱间距对流动沸腾影响的数值研究 [J]. 工程热物理学报, 2022, 43(12): 3352-3358.

HE Jing, QI Di, LIN Mei, et al. Numerical simulation on the effect of pin fin pitch on flow boiling [J]. Journal of Engineering Thermophysics, 2022, 43(12): 3352-3358.

李慧君, 郭保仓, 杜保周, 等. 微柱群通道内饱和沸腾换热特性实验研究 [J]. 制冷学报, 2018, 39(3): 44-50.

LI Huijun, GUO Baocang, DU Baozhou, et al. Experimental study of saturated flow boiling heat transfer in an array of micro-pin-fins [J]. Journal of Refrigeration, 2018, 39(3): 44-50.

SUN Ruirui, HUA Junye, ZHANG Xiuqiang, et al. Experimental study on the effect of shape on the boiling flow and heat transfer characteristics of different pin-fin microchannels [J]. Heat and Mass Transfer, 2021, 57(12): 2081-2095.

WAN Wei, DENG Daxiang, HUANG Qingsong, et al. Experimental study and optimization of pin fin shapes in flow boiling of micro pin fin heat sinks [J]. Applied Thermal Engineering, 2017, 114: 436-449.

杜保周, 李慧君, 郭保仓, 等. 微肋阵通道流动沸腾换热与压降特性 [J]. 化工学报, 2018, 69(12): 4979-4989.

DU Baozhou, LI Huijun, GUO Baocang, et al. Flow boiling heat transfer and pressure drop characteristics in micro channel with micro pin fins [J]. CIESC Journal, 2018, 69(12): 4979-4989.

ZHOU Fang, ZHOU Wei, ZHANG Chenying, et al. Experimental and numerical studies on heat transfer enhancement of microchannel heat exchanger embedded with different shape micropillars [J]. Applied Thermal Engineering, 2020, 175: 115296.

HUA Junye, HOU Wenxin, LI Gui, et al. The experimental study on the boiling bubble behaviors and heat transfer performance of the deionized water across various pin fins [J]. Heat and Mass Transfer, 2021, 57(10): 1609-1622.

ZHAO Zhenxing, HU Bin, HE Jing, et al. Effect of fin shapes on flow boiling heat transfer with staggered fin arrays in a heat sink [J]. Applied Thermal Engineering, 2023, 225: 120179.

ZHOU Zhenlin, WANG Shuang, HE Jing, et al. Bubble dynamics and heat transfer characteristics of flow boiling in a single pentagonal rib channel [J]. ASME Journal of Heat and Mass Transfer, 2023, 145(1): 011602.

LI Wei, CHEN Zengchao, LI Junye, et al. Subcooled flow boiling on hydrophilic and super-hydrophilic surfaces in microchannel under different orientations [J]. International Journal of Heat and Mass Transfer, 2019, 129: 635-649.

胡晓, 林贵平, 王宇鹏, 等. 大功率电力电子设备用微槽道系统实验研究 [J]. 电工电能新技术, 2014, 33(7): 23-27.

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

马赫数与肩壁尾切对涡轮转子叶尖气动损失与传热特性的影响研究

竖直环管内低压水过冷沸腾数值模拟

超临界压力水在倾斜上升管内传热的试验研究

环形通道内超临界水的传热特性研究

电主轴轴心冷却用环路热虹吸管的传热特性