利用空气幕冷却提升涡轮叶栅端壁气膜冷却有效度的实验研究

杨星; 赵强; 吴航; 丰镇平

doi:10.7652/xjtuxb202308001

您当前的位置：

首页 >

文章列表页 >

利用空气幕冷却提升涡轮叶栅端壁气膜冷却有效度的实验研究

能源与动力 | 更新时间：2025-05-08

- 利用空气幕冷却提升涡轮叶栅端壁气膜冷却有效度的实验研究
- An Experimental Investigation of Improving Film Cooling Effectiveness for Turbine Vane Endwalls Using Curtain Cooling
- 西安交通大学学报 2023年57卷第8期页码：1-10
- 作者机构：
  
  1. 西安交通大学能源与动力学院,西安,710049
  2. 陕西省叶轮机械及动力装备工程实验室,西安,710049
  3. 西安航天动力研究所,西安,710100
- 作者简介：
  
  : 2022-11-27。作者简介: 杨星(1990—),男,副教授,硕士生导师
  丰镇平(通信作者),男,教授,博士生导师。基金项目: 国家科技重大专项资助项目(2017-Ⅲ-0003-0027)。
- 基金信息：
  
  : 2022-11-27。作者简介: 杨星(1990—),男,副教授,硕士生导师;丰镇平(通信作者),男,教授,博士生导师。基金项目: 国家科技重大专项资助项目(2017-Ⅲ-0003-0027)。
- DOI：10.7652/xjtuxb202308001
  中图分类号： V231.1
- 网络首发：2023-08-10，
  
  纸质出版：2023
- 稿件说明：
移动端阅览
杨星, 赵强, 吴航, 等. 利用空气幕冷却提升涡轮叶栅端壁气膜冷却有效度的实验研究[J]. 西安交通大学学报, 2023,57(8):1-10.

YANG Xing, ZHAO Qiang, WU Hang, et al. An Experimental Investigation of Improving Film Cooling Effectiveness for Turbine Vane Endwalls Using Curtain Cooling[J]. 2023, 57(8): 1-10.
杨星, 赵强, 吴航, 等. 利用空气幕冷却提升涡轮叶栅端壁气膜冷却有效度的实验研究[J]. 西安交通大学学报, 2023,57(8):1-10. DOI： 10.7652/xjtuxb202308001.

YANG Xing, ZHAO Qiang, WU Hang, et al. An Experimental Investigation of Improving Film Cooling Effectiveness for Turbine Vane Endwalls Using Curtain Cooling[J]. 2023, 57(8): 1-10. DOI： 10.7652/xjtuxb202308001.

摘要

针对涡轮叶栅压力面侧由于横向压力梯度及复杂二次流导致的冷却难题

通过在端壁通道进口靠近压力面侧布置两排离散气膜孔

形成具有独特冷却特征的空气幕冷却

采用压力敏感漆测量技术(PSP)详细研究了空气幕冷却在端壁表面的冷却分布规律及其对通道中离散气膜孔冷气射流的影响。在此基础上

将空气幕冷却应用于端壁气膜冷却形成了改进设计方案。实验结果表明

空气幕冷却具有与通道中离散气膜冷却完全不同的冷却特征

其几乎不受叶栅通道中横向压力梯度的影响

可以有效冷却端壁通道的压力面侧甚至喉部及下游区域; 随着冷气量的增大

空气幕冷却的冷却效果不断增强

并会提高下游端壁通道中离散气膜孔的冷却性能; 与端壁原型气膜冷却方案相比

在冷气量相同的情况下

改进方案将端壁表面的面积平均气膜冷却有效度提高了33%。叶栅出口的流场结构表明

改进方案还可以削弱叶栅的气动损失。

Abstract

Due to circumferential pressure gradients and complicated secondary flows

pressure-side regions of turbine endwalls are one of the most difficult-to-cool regions. This study aims to solve this cooling problem by placing two rows of discrete film holes in the upstream region of the endwall passage inlet near the pressure side to obtain curtain cooling with unique cooling characteristics. A pressure sensitive paint(PSP)technique was implemented to examine film cooling patterns of curtain cooling over the endwall surfaces and its effects on discrete film injection within the passage in detail. Furthermore

an optimized endwall film cooling scheme was obtained by applying curtain cooling to the endwall. The experimental results reveal that curtain cooling has quite different cooling patterns compared with discrete film cooling within the passage. The curtain cooling was slightly influenced by the pressure gradients circumferentially across the endwall passage

resulting in efficient cooling for the pressure-side region and even for the endwall passage throat and its downstream regions. Increasing coolant rates enhances film cooling effectiveness for curtain cooling and improves film cooling performance of the discrete film holes within the endwall passage. The optimized cooling scheme improves film cooling effectiveness over the endwall by 33% relative to a baseline cooling configuration. Additionally

flow structures at the vane cascade exit demonstrate that the optimized cooling configuration reduces the cascade aerodynamic losses

somewhat.

关键词

Keywords

references

杨星, 刘钊, 丰镇平. 燃气轮机透平叶片传热和冷却研究:端壁冷却 [J]. 热力透平, 2014, 43(2): 85-93, 106.

YANG Xing, LIU Zhao, FENG Zhenping. Study on heat transfer and cooling in gas turbine blade: endwall cooling [J]. Thermal Turbine, 2014, 43(2): 85-93, 106.

YANG Xing, ZHAO Qiang, LIU Zhansheng, et al. Film cooling patterns over an aircraft engine turbine endwall with slot leakage and discrete hole injection [J]. International Journal of Heat and Mass Transfer, 2021, 165: 120565.

KNOST D G, THOLE K A. Adiabatic effectiveness measurements of endwall film-cooling for a first-stage vane [J]. Journal of Turbomachinery, 2005, 127(2): 297-305.

NICKLAS M. Film-cooled turbine endwall in a transonic flow field: heat transfer and film-cooling effectiveness [J]. Journal of Turbomachinery, 2001, 123(4): 720-729.

WRIGHT L M, GAO Zhihong, YANG Huitao, et al. Film cooling effectiveness distribution on a gas turbine blade platform with inclined slot leakage and discrete film hole flows [J]. Journal of Heat Transfer, 2008, 130(7): 071702.

张韦馨, 刘战胜, 杨星, 等. 射流角和质量流量比对涡轮端壁气膜冷却特性的影响 [J]. 西安交通大学学报, 2021, 55(4): 107-115.

ZHANG Weixin, LIU Zhansheng, YANG Xing, et al. Effects of mass flow ratio and film hole orientation angle on turbine endwall film cooling characteristics [J]. Journal of Xi'an Jiaotong University, 2021, 55(4): 107-115.

杨星, 刘钊, 刘战胜, 等. 端壁通道间隙对端壁泄漏流冷却的影响 [J]. 工程热物理学报, 2017, 38(1): 44-48.

YANG Xing, LIU Zhao, LIU Zhansheng, et al. Effects of mid-passage gap on endwall purge flow film cooling [J]. Journal of Engineering Thermophysics, 2017, 38(1): 44-48.

杨星, 刘钊, 刘战胜, 等. 端壁错位对端壁泄漏流冷却的影响研究 [J]. 工程热物理学报, 2017, 38(4): 719-725.

YANG Xing, LIU Zhao, LIU Zhansheng, et al. Effects of endwall misalignment on endwall purge flow film cooling [J]. Journal of Engineering Thermophysics, 2017, 38(4): 719-725.

CHEN A F, SHIAU C C, HAN J C. Turbine blade platform film cooling with simulated swirl purge flow and slashface leakage conditions [C]//ASME Turbo Expo 2016: Turbomachinery Technical Conference and Exposition. New York, NY, USA: ASME, 2016: V05CT19A012.

杨星, 吴永强, 吴航, 等. 涡轮端壁内部点阵冷却结构的流热耦合研究 [J]. 西安交通大学学报, 2022, 56(12): 153-162.

YANG Xing, WU Yongqiang, WU Hang, et al. Conjugate heat transfer studies on an internal lattice cooling structure of turbine endwalls [J]. Journal of Xi'an Jiaotong University, 2022, 56(12): 153-162.

MIAO Xin, ZHANG Qiang, ATKIN C, et al. Improving purge air cooling effectiveness by engineered end-wall surface structures: turbine cascade [J]. Journal of Turbomachinery, 2018, 140(9): 091002.

YANG Xing, ZHAO Qiang, FENG Zhenping. Investigation and application of bio-inspired microscale structures to turbine endwall for enhancing film cooling performance [J]. Journal of Thermal Science and Engineering Applications, 2021, 13(6): 061001.

KRYUCHKOV S A. Influence of curtain jet twisting on heat transfer and resistance in cooling of the end surfaces of interblade channels [J]. Heat Transfer Research, 2004, 35(1/2): 125-134.

OKE R A, SIMON T W, BURD S W, et al. Measurements in a turbine cascade over a contoured endwall: discrete hole injection of bleed flow [C]//ASME Turbo Expo 2000: Power for Land, Sea and Air. New York, NY, USA: ASME, 2000: V003T01A022.

ZHANG L Z J, JAISWAL R S. Turbine nozzle endwall film cooling study using pressure-sensitive paint [J]. Journal of Turbomachinery, 2001, 123(4): 730-738.

YANG Xing, LIU Zhao, LIU Zhansheng, et al. Combustor wall coolant discharge effects on turbine vane endwall curtain cooling [J]. Journal of Thermophysics and Heat Transfer, 2018, 32(4): 933-945.

YANG Xing, LIU Zhao, LIU Zhansheng, et al. Endwall film cooling performance for a first-stage guide vane with upstream combustor walls and inlet injection [J]. Journal of Thermal Science and Engineering Applications, 2019, 11(1): 011008.

THOMAS M, POVEY T. Improving turbine endwall cooling uniformity by controlling near-wall secondary flows [J]. Journal of Aerospace Engineering, 2017, 231(14): 2689-2705.

SALINAS D A, ULLAH I, WRIGHT L M, et al. Upstream film cooling on the contoured endwall of a transonic turbine vane in an annular cascade [J]. Journal of Turbomachinery, 2021, 143(6): 061012.

YANG Xing, ZHAO Qiang, WU Hang, et al. Investigations on cooling hole patterns over a turbine endwall for improving cooling effectiveness [C]//ASME Turbo Expo 2022: Turbomachinery Technical Conference and Exposition. New York, NY, USA: ASME, 2022: V06AT12A037.

YANG Xing, ZHAO Qiang, FENG Zhenping. Experimental evaluation of cooling effectiveness from novel film holes over turbine endwalls with inlet swirl [J]. International Journal of Thermal Sciences, 2022, 174: 107434.

HAN J C, RALLABANDI A P. Turbine blade film cooling using PSP technique [J]. Frontiers in Heat and Mass Transfer, 2010, 1: 013001.[23] NATSUI G, LITTLE Z, KAPAT J S, et al. A detailed uncertainty analysis of adiabatic film cooling effectiveness measurements using pressure-sensitive paint [J]. Journal of Turbomachinery, 2016, 138(8): 081007.

KLINE S J, MCCLINTOCK F A. Describing uncertainties in single-sample experiments [J]. Mechanical Engineering, 1953, 75: 3-8.

YANG Xing, ZHAO Qiang, WU Hang, et al. Heat transfer measurements of a turbine endwall with engine-representative freestream turbulence and inlet swirl [J]. Experimental Heat Transfer, 2022, 35(5): 653-673.

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

带球窝结构的尾缘开缝壁面气膜冷却特性研究

射流角和质量流量比对涡轮端壁气膜冷却特性的影响

吹风比和肋板对叶片尾缘开缝气膜冷却特性的影响

张角凹坑气膜孔对双层壁气膜冷却特性的影响

航空发动机高温结构损伤检测研究与应用进展