异侧多级旋流冷却结构对横流抑制及强化传热的影响

肖坤; 董光辰; 丰镇平

doi:10.7652/xjtuxb202305003

您当前的位置：

首页 >

文章列表页 >

异侧多级旋流冷却结构对横流抑制及强化传热的影响

能源与动力 | 更新时间：2025-07-09

- 异侧多级旋流冷却结构对横流抑制及强化传热的影响
- Effects of the Different-Side Multi-Stage Swirling Cooling Configuration on CrossFlow Suppression and Heat Transfer Enhancement
- 西安交通大学学报 2023年57卷第5期页码：24-33
- 作者机构：
  
  1. 西安交通大学能源与动力工程学院,西安,710049
  2. 陕西省叶轮机械及动力装备工程实验室,西安,710049
- 作者简介：
  
  : 2022-08-22。作者简介: 肖坤(1995—),男,博士生
  丰镇平(通信作者),男,教授,博士生导师。基金项目: 国家自然科学基金资助项目(51876156)。
- 基金信息：
  
  : 2022-08-22。作者简介: 肖坤(1995—),男,博士生;丰镇平(通信作者),男,教授,博士生导师。基金项目: 国家自然科学基金资助项目(51876156)。
- DOI：10.7652/xjtuxb202305003
  中图分类号： TK124
- 网络首发：2023-05-10，
  
  纸质出版：2023
- 稿件说明：
移动端阅览
肖坤, 董光辰, 丰镇平. 异侧多级旋流冷却结构对横流抑制及强化传热的影响[J]. 西安交通大学学报, 2023,57(5):24-33.

XIAO Kun, DONG Guangchen, FENG Zhenping. Effects of the Different-Side Multi-Stage Swirling Cooling Configuration on CrossFlow Suppression and Heat Transfer Enhancement[J]. 2023, 57(5): 24-33.
肖坤, 董光辰, 丰镇平. 异侧多级旋流冷却结构对横流抑制及强化传热的影响[J]. 西安交通大学学报, 2023,57(5):24-33. DOI： 10.7652/xjtuxb202305003.

XIAO Kun, DONG Guangchen, FENG Zhenping. Effects of the Different-Side Multi-Stage Swirling Cooling Configuration on CrossFlow Suppression and Heat Transfer Enhancement[J]. 2023, 57(5): 24-33. DOI： 10.7652/xjtuxb202305003.

摘要

为进一步强化前缘旋流冷却

解决目前燃气透平叶片前缘多级旋流冷却结构相邻级之间流动折转带来的高压力损失问题

并提高叶片前缘传热均匀度

在已有研究基础上提出了一种新型的异侧多级旋流冷却结构。建立了原始同侧多级旋流冷却结构和新型异侧多级旋流冷却结构的模型

采用三维定常数值模拟分析方法

在保持靶面温度不变的条件下

对比分析了多个进口雷诺数条件下不同旋流冷却结构的流动与传热特性。仿真结果表明:冷却气体通过切向喷嘴射入旋流腔内部形成高速旋流

显著提高强化传热能力; 对于单级旋流冷却

冷气的周向速度逐渐减小

轴向速度增大

横流逐渐形成

横流对下游射流产生冲击作用

削弱下游换热; 多级旋流冷却结构对于旋流腔内部横流可起到横流抑制作用

周向平均努塞尔数有明显提高

但原始同侧多级旋流冷却结构相邻级之间的流动折转带来了很高的压力损失; 异侧多级冷却结构在原有模型优点的基础上减少了22%的压力损失

改善了冷却气体分配的均匀度

实现了旋流冷却整体传热性能的进一步提升。

Abstract

Based on previous studies

this paper proposes a novel multi-stage swirl cooling structure with different-side nozzles to further enhance the leading-edge swirl cooling and heat transfer uniformity of gas turbine blades

and tackle high pressure loss caused by flow deflection between adjacent stages of the multi-stage swirl cooling structure at the leading edge. The models of the original multi-stage swirl cooling structure on the same side and the new multi-stage swirl cooling structure on the different side are established; the flow and heat transfer characteristics of these two swirl cooling structures at multiple inlet Reynolds numbers are analyzed and compared with the three-dimensional steady numerical simulation method under constant target surface temperature. The calculation results show that the coolant is injected into the swirl chamber through tangential nozzles to form high-speed swirl flow

which significantly improves the heat transfer capacity. For single-stage swirl cooling

the circumferential velocity of coolant gradually decreases while the axial velocity increases

leading to the gradual formation of a cross flow. The cross flow impacts the downstream jet flow and weakens the downstream heat transfer. The multi-stage swirl cooling structure can inhibit the cross flow

and the average circumferential Nusselt number is increased obviously. However

the flow deflection between the adjacent stages of the original multi-stage swirl cooling structure on the same side brings high pressure loss. With the advantages of the original model

the multi-stage cooling structure on the different side reduces the pressure loss by 22%

improves the uniformity of coolant distribution

and further enhances the overall heat transfer performance of the swirl cooling structure.

关键词

Keywords

references

SEIBOLD F, LIGRANI P, WEIGAND B. Flow and heat transfer in swirl tubes: a review [J]. International Journal of Heat and Mass Transfer, 2022, 187: 122455.

KREITH F, MARGOLIS D. Heat transfer and friction in turbulent vortex flow [J]. Applied Scientific Research: Section A, 1959, 8(1): 457-473.

HAY N, WEST P D. Heat transfer in free swirling flow in a pipe [J]. Journal of Heat Transfer, 1975, 97(3): 411-416.

HEDLUND C R, LIGRANI P M, GLEZER B, et al. Heat transfer in a swirl chamber at different temperature ratios and Reynolds numbers [J]. International Journal of Heat and Mass Transfer, 1999, 42(22): 4081-4091.

HEDLUND C R, LIGRANI P M, MOON H K, et al. Heat transfer and flow phenomena in a swirl chamber simulating turbine blade internal cooling [J]. Journal of Turbomachinery, 1999, 121(4): 804-813.

BIEGGER C, SOTGIU C, WEIGAND B. Numerical investigation of flow and heat transfer in a swirl tube [J]. International Journal of Thermal Sciences, 2015, 96: 319-330.

NOVOTNY P, WEIGAND B, MARSIK F, et al. Flow structures in a swirl flow-vortex breakdown condition [J]. Journal of Physics: Conference Series, 2018, 1045(1): 012031.

BIEGGER C, WEIGAND B. Flow and heat transfer measurements in a swirl chamber with different outlet geometries [J]. Experiments in Fluids, 2015, 56(4): 78.

LIU Zhao, LI Jun, FENG Zhenping, et al. Numerical study on the effect of jet nozzle aspect ratio and jet angle on swirl cooling in a model of a turbine blade leading edge cooling passage [J]. International Journal of Heat and Mass Transfer, 2015, 90: 986-1000.

LIU Zhao, LI Jun, FENG Zhenping, et al. Numerical study on the effect of jet spacing on the Swirl flow and heat transfer in the turbine airfoil leading edge region [J]. Numerical Heat Transfer: Part A Applications, 2016, 70(9): 980-994.

LIU Zhao, LI Jun, FENG Zhenping. Numerical Study on the effect of jet slot height on flow and heat transfer of swirl cooling in leading edge model for gas turbine blade [C]//ASME Turbo Expo 2013: Turbine Technical Conference and Exposition. New York, NY, USA: ASME, 2013: V03AT12A029.

LIU Zhao, LI Jun, FENG Zhenping. Numerical study of swirl cooling in a turbine blade leading-edge model [J]. Journal of Thermophysics and Heat Transfer, 2015, 29(1): 166-178.

杜长河, 范小军, 李亮, 等. 喷射角度和喷嘴数对旋流冷却流动与传热特性的影响 [J]. 西安交通大学学报, 2016, 50(4): 76-80, 146.

DU Changhe, FAN Xiaojun, LI Liang, et al. Influences of jet angle and jet nozzle number on flow and heat transfer characteristics of swirl cooling [J]. Journal of Xi'an Jiaotong University, 2016, 50(4): 76-80, 146.

杜长河, 范小军, 李亮, 等. 喷嘴长宽比和雷诺数对旋流冷却流动与传热特性的影响 [J]. 西安交通大学学报, 2015, 49(12): 124-129, 143.

DU Changhe, FAN Xiaojun, LI Liang, et al. Effects of jet nozzle aspect ratio and Reynolds number on flow and heat transfer characteristics of vortex cooling [J]. Journal of Xi'an Jiaotong University, 2015, 49(12): 124-129, 143.

杜长河, 李森, 李亮, 等. 叶片前缘旋流蒸汽冷却流动和传热的数值研究 [J]. 西安交通大学学报, 2015, 49(10): 72-78.

DU Changhe, LI Sen, LI Liang, et al. Numerical study on characteristics of flow and heat transfer of steam vortex cooling for blade leading edges [J]. Journal of Xi'an Jiaotong University, 2015, 49(10): 72-78.

DU Changhe, LI Liang, FAN Xiaojun. Numerical study on vortex cooling flow and heat transfer behavior under rotating conditions [J]. International Journal of Heat and Mass Transfer, 2017, 105: 638-647.

BIEGGER C, RAO Yu, WEIGAND B. Flow and heat transfer measurements in swirl tubes with one and multiple tangential inlet jets for internal gas turbine blade cooling [J]. International Journal of Heat and Fluid Flow, 2018, 73: 174-187.

LUAN Yuxuan, DU Changhe, FAN Xiaojun, et al. Investigations of flow structures and heat transfer in a swirl chamber with different inlet chambers and various aerodynamic parameters [J]. International Journal of Heat and Mass Transfer, 2018, 118: 551-561.

WANG Jiefeng, DU Changhe, WU Fan, et al. Investigation of the vortex cooling flow and heat transfer behavior in variable cross-section vortex chambers for gas turbine blade leading edge [J]. International Communications in Heat and Mass Transfer, 2019, 108: 104301.

LIU Yuyang, RAO Yu, WEIGAND B. Heat transfer and pressure loss characteristics in a swirl cooling tube with dimples on the tube inner surface [J]. International Journal of Heat and Mass Transfer, 2019, 128: 54-65.

XIAO Kun, HE Juan, FENG Zhenping. Effects of trapezoidal swirl chamber on cross-flow suppression and heat transfer enhancement in turbine blade leading-edge swirl cooling [J]. Heat Transfer Research, 2022, 53(12): 55-73.

XIAO Kun, HE Juan, FENG Zhenping. Effects of variable jet nozzle angles on cross-flow suppression and heat transfer enhancement of swirl chamber [J]. Journal of Thermal Science, 2022, 31(1): 214-223.

李菲. 透平前缘旋流冷却横流抑制及换热强化机理研究 [D]. 西安: 西安交通大学, 2021.

YAO Ran, SU Hang, CHENG Yun, et al. Numerical investigation of a novel multistage swirl cooling conception in blade leading edge of gas turbine [J]. International Journal of Thermal Sciences, 2022, 172(Part A): 107269.

RAO Yu, BIEGGER C, WEIGAND B. Heat transfer and pressure loss in swirl tubes with one and multiple tangential jets pertinent to gas turbine internal cooling [J]. International Journal of Heat and Mass Transfer, 2017, 106: 1356-1367.

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

管壳式水合盐化学储热反应器内传热结构拓扑优化

填充金属泡沫铜对相变材料在半圆柱容腔中传热机理的研究

超临界水异常区域热力学特性研究

采用试验设计方法的第三代CO2气体箔轴承箔片几何参数敏感性分析

隧道内燃料电池汽车氢气泄漏扩散特性及影响因素