填充金属泡沫铜对相变材料在半圆柱容腔中传热机理的研究

孙向昕; 张华; 王子龙; 豆斌林; 张冠华

doi:10.7652/xjtuxb202302003

您当前的位置：

首页 >

文章列表页 >

填充金属泡沫铜对相变材料在半圆柱容腔中传热机理的研究

专题新能源与储能 | 更新时间：2025-07-09

- 填充金属泡沫铜对相变材料在半圆柱容腔中传热机理的研究
- Study on Heat Transfer Mechanism of Phase Change Materials Filled with Copper Foam in a Semi-Cylindrical Cavity
- 西安交通大学学报 2023年57卷第2期页码：21-30
- 作者机构：
  
  1. 上海理工大学能源与动力工程学院,上海,200093
  2. 上海市动力工程多相流动与传热重点实验室,上海,200093
- 作者简介：
  
  : 2022-06-14。作者简介: 孙向昕(1998—),男,硕士生
  王子龙(通信作者),男,副教授,硕士生导师。基金项目: 上海市自然科学基金资助项目(20ZR1438600)
- 基金信息：
  
  : 2022-06-14。作者简介: 孙向昕(1998—),男,硕士生;王子龙(通信作者),男,副教授,硕士生导师。基金项目: 上海市自然科学基金资助项目(20ZR1438600);上海市教委青年东方学者项目(1018301008);上海市浦江人才计划项目(18PJ1408900)。
- DOI：10.7652/xjtuxb202302003
  中图分类号： TK124
- 网络首发：2023-02-10，
  
  纸质出版：2023
- 稿件说明：
移动端阅览
孙向昕, 张华, 王子龙, 等. 填充金属泡沫铜对相变材料在半圆柱容腔中传热机理的研究[J]. 西安交通大学学报, 2023,57(2):21-30.

SUN Xiangxin, ZHANG Hua, WANG Zilong, et al. Study on Heat Transfer Mechanism of Phase Change Materials Filled with Copper Foam in a Semi-Cylindrical Cavity[J]. 2023, 57(2): 21-30.
孙向昕, 张华, 王子龙, 等. 填充金属泡沫铜对相变材料在半圆柱容腔中传热机理的研究[J]. 西安交通大学学报, 2023,57(2):21-30. DOI： 10.7652/xjtuxb202302003.

SUN Xiangxin, ZHANG Hua, WANG Zilong, et al. Study on Heat Transfer Mechanism of Phase Change Materials Filled with Copper Foam in a Semi-Cylindrical Cavity[J]. 2023, 57(2): 21-30. DOI： 10.7652/xjtuxb202302003.

摘要

为研究不同金属泡沫铜填充率下金属泡沫铜对石蜡融化过程的传热规律

设计并搭建了一套可视化蓄能实验装置

并建立了对应的数学传热模型

分析了不同填充率下复合相变材料在融化过程中温度分布、固液相界面、速度矢量、液相分数和平均Nu的变化

得到了不同填充率下金属泡沫铜对石蜡相变过程的强化传热机理

并进行了实验验证。结果表明:当金属泡沫铜的填充率从0增大至1.28%时

复合相变蓄热材料的融化时间从901 s缩短至830 s

较纯石蜡减少了7.88%

而当泡沫铜填充率为1.28%时

石蜡内部温度为12.6 K

梯度最小; 平均Nu从24.89下降到3.27

下降了86.9%。由模拟结果可得

填充率为0.43%、1.28%的复合相变材料液化速率较纯石蜡分别提高了1.61%、7.11%

这说明金属泡沫铜的填充率越大

强化传热效果越好。

Abstract

In order to explore the influence of copper foam filling on internal heat transfer during paraffin melting

a set of visual energy storage experimental device is designed and built

and its mathematical heat transfer model is established accordingly. The changes in temperature distribution

solid-liquid interface

velocity vector

liquid fraction and mean Nusselt number of composite phase change materials with different filling rates during melting are analyzed

and the mechanism of enhanced heat transfer of paraffin wax by copper foam filling rate is concluded. The results show that when the copper foam filling rate increases from 0% to 1.28%

the melting time of composite PCM decreases from 901 s to 830 s

showing a reduction of 7.88% than that of pure paraffin wax. At the copper foam filling rate of 1.28%

paraffin wax gains the smallest temperature gradient of 9.1 K. According to the simulation results

the liquefaction rates of the composite phase change materials with filling rates of 0.43% and 1.28% are 1.61% and 7.11% higher than those of pure paraffin

respectively. This indicates that higher copper foam filling rate leads to better enhanced heat transfer effect.

关键词

Keywords

references

ZHANG Shuai, FENG Daili, SHI Lei, et al. A review of phase change heat transfer in shape-stabilized phase change materials(ss-PCMs)based on porous supports for thermal energy storage [J]. Renewable and Sustainable Energy Reviews, 2021, 135: 110127.

GADHAVE P, PATHAN F, KORE S, et al. Comprehensive review of phase change material based latent heat thermal energy storage system [J]. International Journal of Ambient Energy, 2022, 43(1): 4181-4206.

TAUSEEF-UR-REHMAN T, ALI H M, JANJUA M M, et al. A critical review on heat transfer augmentation of phase change materials embedded with porous materials/foams [J]. International Journal of Heat and Mass Transfer, 2019, 135: 649-673.

甘玉娟, 彭浩, 王一峰. 微重力下内嵌翅片蓄热腔体内相变材料的融化传热特性 [J]. 热能动力工程, 2020, 35(12): 108-114.

GAN Yujuan, PENG Hao, WANG Yifeng. Melting heat transfer characteristics of phase change material in thermal energy storage cavity with Fins under microgravity [J]. Journal of Engineering for Thermal Energy and Power, 2020, 35(12): 108-114.

张宇迪, 章学来, 纪珺, 等. 基于热管技术的相变材料强化传热技术进展 [J]. 功能材料, 2019, 50(1): 1056-1066.

ZHANG Yudi, ZHANG Xuelai, JI Jun, et al. Progress in heat transfer enhancement of phase change materials [J]. Journal of Functional Materials, 2019, 50(1): 1056-1066.

XIAO X, ZHANG P, LI M. Preparation and thermal characterization of paraffin/metal foam composite phase change material [J]. Applied Energy, 2013, 112: 1357-1366.

HUANG Xiang, LIN Yaxue, ALVA G, et al. Thermal properties and thermal conductivity enhancement of composite phase change materials using myristyl alcohol/metal foam for solar thermal storage [J]. Solar Energy Materials and Solar Cells, 2017, 170: 68-76.

郭增旭, 白青松, 杨肖虎, 等. 不同倾角下通孔金属泡沫强化蓄热实验研究 [J]. 西安交通大学学报, 2019, 53(1): 157-162.

GUO Zengxu, BAI Qingsong, YANG Xiaohu, et al. Experimental investigation on the heat storage enhancement of phase change materials embedded in open-cell metal foam in an inclined rectangular enclosure [J]. Journal of Xi'an Jiaotong University, 2019, 53(1): 157-162.

白青松, 郭增旭, 刘亦琳, 等. 通孔金属泡沫强化蓄冰实验研究 [J]. 西安交通大学学报, 2018, 52(1): 20-25.

BAI Qingsong, GUO Zengxu, LIU Yilin, et al. Experimental study on enhanced ice storage in open-cell metal foams [J]. Journal of Xi'an Jiaotong University, 2018, 52(1): 20-25.

CUI Yanbin, LIU Caihong, HU Shan, et al. The experimental exploration of carbon nanofiber and carbon nanotube additives on thermal behavior of phase change materials [J]. Solar Energy Materials and Solar Cells, 2011, 95(4): 1208-1212.

TIAN Heqing, DU Lichan, WEI Xiaolan, et al. Enhanced thermal conductivity of ternary carbonate salt phase change material with Mg particles for solar thermal energy storage [J]. Applied Energy, 2017, 204: 525-530.

SARI A, KARAIPEKLI A. Thermal conductivity and latent heat thermal energy storage characteristics of paraffin/expanded graphite composite as phase change material [J]. Applied Thermal Engineering, 2007, 27(8/9): 1271-1277.

LING Ziye, CHEN Jiajie, XU Tao, et al. Thermal conductivity of an organic phase change material/expanded graphite composite across the phase change temperature range and a novel thermal conductivity model [J]. Energy Conversion and Management, 2015, 102: 202-208.

李勇, 郭蓓, 黄官飞, 等. 太阳能热发电复合相变蓄热材料的实验研究 [J]. 西安交通大学学报, 2014, 48(3): 49-53, 95.

LI Yong, GUO Bei, HUANG Guanfei, et al. Experimental investigation on phase change thermal storage material composite for solar energy thermal power [J]. Journal of Xi'an Jiaotong University, 2014, 48(3): 49-53, 95.

ZHANG Huanzhi, WANG Xiaodong, WU Dezhen. Silica encapsulation of n-octadecane via sol-gel process: a novel microencapsulated phase-change material with enhanced thermal conductivity and performance [J]. Journal of Colloid and Interface Science, 2010, 343(1): 246-255.

YUAN Kunjie, WANG Huichun, LIU Jian, et al. Novel slurry containing graphene oxide-grafted microencapsulated phase change material with enhanced thermo-physical properties and photo-thermal performance [J]. Solar Energy Materials and Solar Cells, 2015, 143: 29-37.

田东东, 王会, 刁永发, 等. 金属泡沫孔密度对石蜡融化性能影响的实验研究 [J]. 西安交通大学学报, 2020, 54(5): 32-39.

TIAN Dongdong, WANG Hui, DIAO Yongfa, et al. Experimental investigation on the melting behavior of paraffin wax embedded in metal foams with different pore densities [J]. Journal of Xi'an Jiaotong University, 2020, 54(5): 32-39.

LIU Aihua, LIN Junjiang, ZHUANG Yijie. PIV experimental study on the phase change behavior of phase change material with partial filling of metal foam inside a cavity during melting [J]. International Journal of Heat and Mass Transfer, 2022, 187: 122567.

XU Yang, REN Qinlong, ZHENG Zhangjing, et al. Evaluation and optimization of melting performance for a latent heat thermal energy storage unit partially filled with porous media [J]. Applied Energy, 2017, 193: 84-95.

TAO Y B, YOU Y, HE Y L. Lattice Boltzmann simulation on phase change heat transfer in metal foams/paraffin composite phase change material [J]. Applied Thermal Engineering, 2016, 93: 476-485.

ZHANG Zhuqian, HE Xiande. Three-dimensional numerical study on solid-liquid phase change within open-celled aluminum foam with porosity gradient [J]. Applied Thermal Engineering, 2017, 113: 298-308.

TIARI S, MAHDAVI M. Computational study of a latent heat thermal energy storage system enhanced by highly conductive metal foams and heat pipes [J]. Journal of Thermal Analysis and Calorimetry, 2020, 141(5): 1741-1751.

MENG Xi, YAN Lianyu, HE Fan. Filling copper foam partly on thermal behavior of phase-change material in a rectangular enclosure [J]. Journal of Energy Storage, 2020, 32: 101867.

JOSHI V, RATHOD M K. Thermal performance augmentation of metal foam infused phase change material using a partial filling strategy: an evaluation for fill height ratio and porosity [J]. Applied Energy, 2019, 253: 113621.

YANG Xiaohu, FENG Shangsheng, ZHANG Qunli, et al. The role of porous metal foam on the unidirectional solidification of saturating fluid for cold storage [J]. Applied Energy, 2017, 194: 508-521.

YANG Xiaohu, BAI Qingsong, GUO Zengxu, et al. Comparison of direct numerical simulation with volume-averaged method on composite phase change materials for thermal energy storage [J]. Applied Energy, 2018, 229: 700-714.

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

液氢管路输运中静电积聚机理与电流密度分布特征研究

X射线辐照下聚酰亚胺材料空间电荷分布特性的数值模拟

异质裂隙内超临界CO2地热提取特性数值模拟研究

工质与叶轮传热对超临界二氧化碳向心透平气动性能与流动特性的作用机制

机翼近场尾流流动特性的附着涡模型分析