有载分接开关驱动轴转动位置的闭环反馈抗扰控制策略

南凯刚; 杨帆; 汪可; 成海炎; 张进华; 洪军

doi:10.7652/xjtuxb202206008

您当前的位置：

首页 >

文章列表页 >

有载分接开关驱动轴转动位置的闭环反馈抗扰控制策略

—————————————————————— | 更新时间：2025-04-27

- 有载分接开关驱动轴转动位置的闭环反馈抗扰控制策略
- Closed Loop Feedback Disturbance Rejection Control Strategy for Drive Shaft Rotational Position of on-Load Tap-Changer
- 西安交通大学学报 2022年56卷第6期页码：58-66
- 作者机构：
  
  1. 西安交通大学机械工程学院,西安,710049
  2. 中国电力科学研究院有限公司,北京,100192
- 作者简介：
  
  : 2021-11-11。作者简介: 南凯刚(1985—),男,工程师
  张进华(通信作者),男,教授,博士生导师。基金项目: 国家电网公司总部科技项目资助(5500-202055351A-0-0-00)
- 基金信息：
  
  : 2021-11-11。作者简介: 南凯刚(1985—),男,工程师;张进华(通信作者),男,教授,博士生导师。基金项目: 国家电网公司总部科技项目资助(5500-202055351A-0-0-00)
- DOI：10.7652/xjtuxb202206008
  中图分类号： TP391
- 网络首发：2022-06-10，
  
  纸质出版：2022
- 稿件说明：
移动端阅览
南凯刚, 杨帆, 汪可, 等. 有载分接开关驱动轴转动位置的闭环反馈抗扰控制策略[J]. 西安交通大学学报, 2022,56(6):58-66.

NAN Kaigang, YANG Fan, WANG Ke, et al. Closed Loop Feedback Disturbance Rejection Control Strategy for Drive Shaft Rotational Position of on-Load Tap-Changer[J]. 2022, 56(6): 58-66.
南凯刚, 杨帆, 汪可, 等. 有载分接开关驱动轴转动位置的闭环反馈抗扰控制策略[J]. 西安交通大学学报, 2022,56(6):58-66. DOI： 10.7652/xjtuxb202206008.

NAN Kaigang, YANG Fan, WANG Ke, et al. Closed Loop Feedback Disturbance Rejection Control Strategy for Drive Shaft Rotational Position of on-Load Tap-Changer[J]. 2022, 56(6): 58-66. DOI： 10.7652/xjtuxb202206008.

摘要

针对有载分接开关在实现切换工作时驱动轴存在传动不稳定、转动位置不精确的问题

提出了一种以有载分接开关驱动轴转动位置为被控量的闭环反馈抗扰控制策略。首先

根据在电动机构作用下有载分接开关工作状态对驱动轴的转动位置需求

建立了驱动轴期望位置的误差动态控制系统; 其次

设计了两个跟踪微分器以计算驱动轴位置信号的光滑跟踪信号

进而可通过调节参数来控制驱动轴位置轨迹的过渡过程; 然后

设计了两个扩张状态观测器去估计误差动态控制系统中的状态值及由于有载分接开关在工作中受负载变化、切换方向改变等因素引起的总和扰动值; 最后

利用驱动轴位置误差信号及误差动态控制系统的状态估计值设计非线性反馈控制器

并在控制器中补偿扩张状态观测器估计的总和扰动值来实现抗扰控制效果。应用Matlab仿真软件对所提控制策略进行了验证

仿真结果表明

所提控制策略可实现有载分接开关驱动轴的期望位置控制

与传统PID控制策略相比

所提抗扰控制策略将有载分接开关驱动轴闭环反馈控制下位置误差减少了85%。

Abstract

In terms of problems of unstable transmission and inaccurate rotational position for a drive shaft when an on-load tap-changer realizes switching operations

a closed-loop feedback disturbance rejection control strategy is proposed with the rotational position for the drive shaft of the on-load tap-changer taken as the controlled variable. Firstly

according to rotational position requirements of the drive shaft for the on-load tap-changer under actions of an electric mechanism

an error dynamic control system is established for the desired position of the drive shaft. Secondly

two tracking differentiators are designed to calculate smooth tracking signals of drive shaft position signals

and then transition processes of the drive shaft position trajectory can be controlled by adjusting parameters in tracking differentiators Then

two extended state observers are designed to estimate state values in the error dynamic control system and the total disturbance caused by load change

switching direction change and other factors for the on-load tap-changer during operation. Finally

a nonlinear feedback controller is designed by using the position error signal of the drive shaft and state estimation values of the error dynamic control system

and the total disturbance value estimated by the extended state observer is compensated in the nonlinear feedback controller to achieve effects of disturbance rejection control. The Matlab simulation software is used to verify the proposed control strategy. Simulation results show that the proposed control strategy can realize the desired position control of the drive shaft for the on-load tap-changer. Compared with the traditional PID control strategy

the proposed disturbance rejection control strategy reduces the position error of the drive shaft for the on-load tap-changer under closed-loop feedback control by 85%.

关键词

Keywords

references

官澜, 李光范, 李博, 等. 我国特高压电力变压器研制技术及发展 [J]. 变压器, 2014, 51(8): 28-33.

GUAN Lan, LI Guangfan, LI Bo, et al. Manufacture technology and development of UHV power transformer in China [J]. Transformer, 2014, 51(8): 28-33.

刘雪丽, 李金忠, 高飞, 等. ±800 kV换流变压器用真空式有载分接开关关键技术研究 [J]. 中国电机工程学报, 2016, 36(19): 5350-5356.

LIU Xueli, LI Jinzhong, GAO Fei, et al. Key technology research for vacuum type on-load tap-changer of ±800 kV direct current convertor transformers [J]. Proceedings of the CSEE, 2016, 36(19): 5350-5356.

张磊, 陈梁远, 余长厅, 等. 变压器有载分接开关运行分析及探讨 [J]. 广西电力, 2020, 43(5): 32-35.

ZHANG Lei, CHEN Liangyuan, YU Changting, et al. Analysis and discussion on operation of the transformer on-load tap-changer [J]. Guangxi Electric Power, 2020, 43(5): 32-35.

高飞, 李金忠, 张书琦. 新型变压器有载分接开关综述 [J]. 电工电气, 2013(10): 1-5.

GAO Fei, LI Jinzhong, ZHANG Shuqi. Comprehensive description of new-type transformer on-load tap-changer [J]. Electrotechnics Electric, 2013(10): 1-5.

梁贵书, 晏阔, 高飞, 等. 变压器混合式有载分接开关熄弧方法的仿真及试验研究 [J]. 高电压技术, 2014, 40(10): 3156-3163.

LIANG Guishu, YAN Kuo, GAO Fei, et al. Study on simulation and experiments of method of extinction hybrid on-load tap changer in transformers [J]. High Voltage Engineering, 2014, 40(10): 3156-3163.

张小宝. MR M型有载分接开关连续调档故障分析与处理 [J]. 冶金动力, 2020(5): 6-9, 17.

ZHANG Xiaobao. Fault analysis and treatment of continuous shifting adjustment of MR M-type on-load tap changer [J]. Metallurgical Power, 2020(5): 6-9, 17.

陆琳. 变压器有载分接开关电动机构故障分析及处理方法 [J]. 电工技术, 2018(5): 94-96, 98.

LU Lin. Fault analysis and treatment of motor-driving mechanism of on-load tap-changer in transformer [J]. Electric Engineering, 2018(5): 94-96, 98.

张德明. 变压器有载分接开关 [M]. 沈阳: 辽宁科学技术出版社, 1998: 126-130.

张姗, 张建辉, 郭晋伟. 新型智能有载分接开关控制器的设计 [J]. 通信电源技术, 2019, 36(3): 173-174.

ZHANG Shan, ZHANG Jianhui, GUO Jinwei. Design of new intelligent on-load tap switch controller [J]. Telecom Power Technology, 2019, 36(3): 173-174.

徐磊, 朱孝勇, 张超, 等. 直线旋转永磁电机及其控制技术综述与新发展 [J]. 中国电机工程学报, 2020, 40(6): 1972-1984.

XU Lei, ZHU Xiaoyong, ZHANG Chao, et al. Overview and new development of linear and rotary permanent magnet machines and control technologies [J]. Proceedings of the CSEE, 2020, 40(6): 1972-1984.

HAN Jingqing. From PID to active disturbance rejection control [J]. IEEE Transactions on Industrial Electronics, 2009, 56(3): 900-906.

俞滨, 巴凯先, 刘雅梁, 等. 基于扩张观测器的液压驱动单元位置抗扰控制 [J]. 液压与气动, 2018(1): 1-8.

YU Bin, BA Kaixian, LIU Yaliang, et al. Research of anti-interference control method of hydraulic driving unit position control system based on external state observer [J]. Chinese Hydraulics Pneumatics, 2018(1): 1-8.

CHENG Haiyan, LI Dahai, ZHANG Jinhua, et al. Nonlinear error feedback positioning control for a pneumatic soft bionic fin via an extended state observer [J]. IEEE Access, 2020, 8: 12688-12696.

CHENG Haiyan, ZHANG Jinhua, LI Yuanjie, et al. Finite-time tracking control for a variable stiffness pneumatic soft bionic caudal fin [J]. Mechanical Systems and Signal Processing, 2021, 152: 107314.

DU Bochao, WU Shaopeng, HAN Shouliang, et al. Application of linear active disturbance rejection controller for sensorless control of internal permanent-magnet synchronous motor [J]. IEEE Transactions on Industrial Electronics, 2016, 63(5): 3019-3027.

张德明. 分接开关技术的发展特点 [J]. 上海电器技术, 2005(3): 12-16.

ZHANG Deming. The technology of tap changer develop characteristic [J]. Shanghai Electric Appliance Technology, 2005(3): 12-16.

张德明. 真空分接开关技术的论述(7)[J]. 变压器, 2012, 49(2): 52-56.

ZHANG Deming. Discussion on the technology of vacuum tap changer(7)[J]. Transformer, 2012, 49(2): 52-56.

上海华明电力设备制造有限公司. 数控分接开关电动机构: 中国, CN201320300019.9 [P]. 2013-11-06.

上海华明电力设备制造有限公司. SHM-D分接开关数控操作机构使用说明书 [EB/OL].(2021-08-26)[2021-10-01]. http:∥www.huaming.com/uploads/20210826/03bb6e29e3f4138057c0da2a7e8380f1.pdf.

MARINO R, PERESADA S, TOMEI P. Nonlinear adaptive control of permanent magnet step motors [J]. Automatica, 1995, 31(11): 1595-1604.

FLIESS M, LÉVINE L, MARTIN P, et al. Flatness and defect of non-linear systems: introductory theory and examples [J]. International Journal of Control, 1995, 61(6): 1327-1361.

DEFOORT M, NOLLET F, FLOQUET T, et al. A third-order sliding-mode controller for a stepper motor [J]. IEEE Transactions on Industrial Electronics, 2009, 56(9): 3337-3346.

韩京清. 自抗扰控制技术: 估计补偿不确定因素的控制技术 [M]. 北京: 国防工业出版社, 2008: 183-197.

GAO Zhiqiang. Scaling and bandwidth-parameterization based controller tuning [C]∥Proceedings of the 2003 American Control Conference, 2003. Piscataway, NJ, USA: IEEE, 2003: 4989-4996.

刘春强, 骆光照, 涂文聪, 等. 基于自抗扰控制的双环伺服系统 [J]. 中国电机工程学报, 2017, 37(23): 7032-7039.

LIU Chunqiang, LUO Guangzhao, TU Wencong, et al. Servo systems with double closed-loops based on active disturbance rejection controllers [J]. Proceedings of the CSEE, 2017, 37(23): 7032-7039.

BODSON M, CHIASSON J N, NOVOTNAK R T, et al. High-performance nonlinear feedback control of a permanent magnet stepper motor [J]. IEEE Transactions on Control Systems Technology, 1993, 1(1): 5-14.

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

制冷系统自抗扰解耦控制

压缩式制冷系统预测自抗扰控制

压力脉冲测试系统滑模抗干扰控制方法

电机伺服系统快速自适应抗扰控制

面向永磁同步电机负载转矩观测的自抗扰改进滑模控制