考虑气膜冷却脉动特性的涡轮动叶凹槽状叶顶气动和冷却性能研究

许承天; 李志刚; 李军

doi:10.7652/xjtuxb202205013

您当前的位置：

首页 >

文章列表页 >

考虑气膜冷却脉动特性的涡轮动叶凹槽状叶顶气动和冷却性能研究

更新时间：2025-07-09

- 考虑气膜冷却脉动特性的涡轮动叶凹槽状叶顶气动和冷却性能研究
- Study on Aerodynamic and Cooling Performance of Turbine Blade Squealer Tip with Film Cooling Pulsation Characteristics Considered
- 西安交通大学学报 2022年56卷第5期页码：127-140
- 作者机构：
  
  西安交通大学叶轮机械研究所,西安,710049
- 作者简介：
  
  : 2021-11-08。作者简介: 许承天(1998—),男,硕士生
  李军(通信作者),男,教授,博士生导师。基金项目: 国家自然科学基金资助项目(51936008)
- 基金信息：
  
  : 2021-11-08。作者简介: 许承天(1998—),男,硕士生;李军(通信作者),男,教授,博士生导师。基金项目: 国家自然科学基金资助项目(51936008);国家科技重大专项资助项目(2017-III-0010-0036)
- DOI：10.7652/xjtuxb202205013
  中图分类号： V231.1
- 网络首发：2022-05-10，
  
  纸质出版：2022
- 稿件说明：
移动端阅览
许承天, 李志刚, 李军. 考虑气膜冷却脉动特性的涡轮动叶凹槽状叶顶气动和冷却性能研究[J]. 西安交通大学学报, 2022,56(5):127-140.

XU Chengtian, LI Zhigang, LI Jun. Study on Aerodynamic and Cooling Performance of Turbine Blade Squealer Tip with Film Cooling Pulsation Characteristics Considered[J]. 2022, 56(5): 127-140.
许承天, 李志刚, 李军. 考虑气膜冷却脉动特性的涡轮动叶凹槽状叶顶气动和冷却性能研究[J]. 西安交通大学学报, 2022,56(5):127-140. DOI： 10.7652/xjtuxb202205013.

XU Chengtian, LI Zhigang, LI Jun. Study on Aerodynamic and Cooling Performance of Turbine Blade Squealer Tip with Film Cooling Pulsation Characteristics Considered[J]. 2022, 56(5): 127-140. DOI： 10.7652/xjtuxb202205013.

摘要

为了深入研究压气机抽取的脉动冷气影响燃气涡轮动叶凹槽状叶顶的流动与冷却特性

采用数值求解三维非稳态雷诺时均N-S方程和标准k-ω湍流模型的方法

研究了考虑气膜冷却脉动特性的涡轮动叶凹槽状叶顶的气动和冷却性能。采用正弦函数描述动叶凹槽状叶顶中弧线等间距布置气膜冷却孔的冷气脉动特性

对比研究了3种脉动振幅和5种脉动频率的动叶凹槽状叶顶气膜冷却有效度和总压损失系数。研究结果表明:在一个脉动周期内

不同瞬时冷气的穿透能力和附着能力差异显著。气膜冷却冷气吹风比小幅值脉动时

脉动频率的提高改变了叶顶气膜冷却有效度变化曲线的相位

但对整体的冷却效果基本没有影响; 冷气吹风比大幅值脉动时

脉动频率的增大略微提高了叶顶冷却性能

并且当脉动频率增大至最大值2 000 Hz时

受到延迟反馈效应的影响

脉动周期内气膜冷却有效度的最低值相比250 Hz时提高约50%。高温主流在冷气吹风比大幅值脉动时周期性入侵冷气管路

对叶顶中间弦长和尾缘处的气膜孔结构造成破环。气膜冷却冷气吹风比低频脉动时

动叶平均总压损失系数以正弦函数规律变化

不同瞬时的总压损失系数差异随冷气吹风比脉动幅值的增大而扩大

同时当脉动频率增加时

不同瞬时之间的总压损失系数差异逐渐缩小。研究工作可为考虑气膜冷却脉动特性影响下动叶叶顶的气热性能分析提供参考。

Abstract

To study how the pulsating coolant extracted from the compressor affect the flow and cooling characteristics of the squealer tip of a gas turbine blade

the aerodynamic and cooling performance of the turbine blade squealer tip with film cooling pulsation characteristics is studied by numerically solving three-dimensional unsteady Reynolds-averaged Navier-Stokes(URANS)equations and using the standard k-ω turbulence model. Nine film holes are arranged along the middle camber line of the squealer tip at equal intervals

and sinusoidal function is used to describe the discipline of the coolant pulsation. The tip film cooling effectiveness and total pressure loss coefficient are compared and studied at three pulsating amplitudes and five pulsating frequencies. The results show that there are obvious differences in the coolant penetration and adhesion at different instants in a pulsating cycle. When the coolant blowing ratio fluctuates slightly

the increase of the pulsating frequency changes the phase of the tip film cooling effectiveness curve

but has no effect on the overall cooling performance. However

when the coolant blowing ratio fluctuates greatly

the increase of the pulsating frequency will slightly improve the tip cooling efficiency

and affected by the delayed feedback effect

as the pulsating frequency increases to the maximum value of 2 000 Hz

the lowest value of film cooling effectiveness is increased by about 50% compared to 250 Hz during the pulsation period. The high-temperature mainstream periodically invades the coolant pipeline with the large amplitude pulsation

causing damage to the original structure of the film holes at the tip middle chord and trailing edge. The averaged total pressure loss coefficient follows the law of sinusoidal function when the coolant blowing ratio pulsates with a low frequency

the total pressure loss difference increases at varied instants with the pulsating amplitude enlargement. Meantime

the difference gradually decreases when the pulsating frequency increases. This study can provide the reference for the aerothermal performance analysis of the turbine blade squealer tip with consideration of the film cooling pulsation characteristics.

关键词

Keywords

references

李苏辉, 张归华, 吴玉新. 面向未来燃气轮机的先进燃烧技术综述 [J]. 清华大学学报(自然科学版), 2021, 61(12): 1423-1437.

LI Suhui, ZHANG Guihua, WU Yuxin. Advanced combustion technologies for future gas turbines [J]. Journal of Tsinghua University(Science and Technology), 2021, 61(12): 1423-1437.

HAN J C, DUTTA S, EKKAD S. Gas turbine heat transfer and cooling technology [M]. New York, USA: Taylor Francis, 2000: 1-5.

周治华, 陈绍文, 李伟航, 等. 叶顶凹槽间隙气膜冷却的传热数值研究 [J]. 推进技术, 2018, 39(3): 575-582.

ZHOU Zhihua, CHEN Shaowen, LI Weihang, et al. Heat transfer numerical research on film cooling of tip groove clearance [J]. Journal of Propulsion Technology, 2018, 39(3): 575-582.

杜昆, 晏鑫, 李军. 燃气透平凹槽状叶顶气膜冷却特性研究 [J]. 燃气轮机技术, 2014, 27(1): 27-31.

DU Kun, YAN Xin, LI Jun. Investigations on the film cooling characteristics of the gas turbine blade with squealer tip [J]. Gas Turbine Technology, 2014, 27(1): 27-31.

郭嘉杰, 王新军, 鲍宇航. 椭圆孔及偏转角对凹槽叶顶气膜冷却流动换热特性的影响 [J]. 西安交通大学学报, 2021, 55(1): 153-161.

GUO Jiajie, WANG Xinjun, BAO Yuhang. Effects of oval-hole and inclination angle on the flow and heat transfer performance of the turbine blade with squealer tip [J]. Journal of Xi'an Jiaotong University, 2021, 55(1): 153-161.

黄琰, 晏鑫, 何坤, 等. 气膜孔分布对凹槽叶顶传热和冷却性能的影响 [J]. 西安交通大学学报, 2016, 50(5): 101-107.

HUANG Yan, YAN Xin, HE Kun, et al. Effect of cooling-hole distributions on heat transfer and cooling effectiveness on turbine blade tip [J]. Journal of Xi'an Jiaotong University, 2016, 50(5): 101-107.

于金杏, 叶明亮, 何坤, 等. 压力侧冷却流对凹槽叶顶冷却传热性能的影响 [J]. 西安交通大学学报, 2022, 56(3): 1-12.

YU Jinxing, YE Mingliang, HE Kun, et al. Effect of pressure-side cooling flow on film cooling and heat transfer performance at squealer tip [J]. Journal of Xi'an Jiaotong university, 2022, 56(3): 1-12.

JIANG Shijie, LI Zhigang, LI Jun, et al. Numerical investigations on the heat transfer performance of transonic squealer tip with different film cooling layouts [C]∥ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition. New York, NY, USA: ASME, 2020: V07BT12A065.

黄明, 李军, 李志刚, 等. 动叶凹槽状叶顶气膜冷却有效度和气动性能不确定性量化研究 [J]. 西安交通大学学报, 2021, 55(5): 181-192.

HUANG Ming, LI Jun, LI Zhigang, et al. Investigations on uncertainty quantification of film cooling effectiveness and aerodynamic performance of turbine blade squealer tip [J]. Journal of Xi'an Jiaotong University, 2021, 55(5): 181-192.

肖东, 李琛玺, 宋立明, 等. 凹槽深度及吹风比的不确定性对动叶叶顶冷却特性影响研究 [J]. 工程热物理学报, 2020, 41(7): 1627-1634.

XIAO Dong, LI Chenxi, SONG Liming, et al. Influence of uncertainties arising from squealer depth and blowing ratio on cooling characteristics of rotor tips [J]. Journal of Engineering Thermophysics, 2020, 41(7): 1627-1634.

ANDREOLI V, BRAUN J, PANIAGUA G, et al. Aerothermal optimization of fully cooled turbine blade tips [J]. Journal of Turbomachinery, 2019, 141(6): 061007.

ULLAH I, ALSALEEM S M, WRIGHT L M, et al. Influence of coolant density on turbine blade film cooling at transonic cascade flow conditions using the pressure sensitive paint technique [C]∥ASME Turbo Expo 2021: Turbomachinery Technical Conference and Exposition. New York, NY, USA: ASME, 2021: V05AT12A015.

VIEIRA J, COULL J, IRELAND P, et al. Aerothermal effect of cavity welding beads on a transonic squealer tip [J]. Journal of Turbomachinery, 2021, 143(11): 111009.

OU S, RIVIR R B. Shaped-hole film cooling with pulsed secondary flow [C]∥ASME Turbo Expo 2006: Power for Land, Sea, and Air. New York, NY, USA: ASME, 2006: 259-269.

蔡乐. 超高负荷扩压叶栅分离结构及其定常与非定常控制研究 [D]. 哈尔滨: 哈尔滨工业大学, 2015: 191-217.

陈伟佳. 涡轮冷气非定常脉动喷射的流动与冷却机理 [D]. 哈尔滨: 哈尔滨工业大学, 2019: 29-46.

COULTHARD S M, VOLINO R J, FLACK K A. Effect of jet pulsing on film cooling: part I effectiveness and flow-field temperature results [J]. Journal of Turbomachinery, 2007, 129(2): 232-246.

COULTHARD S M, VOLINO R J, FLACK K A. Effect of jet pulsing on film cooling: part II heat transfer results [J]. Journal of Turbomachinery, 2007, 129(2): 247-257.

KE Zhaoqing, WANG Jianhua. Conjugate heat transfer simulations of pulsed film cooling on an entire turbine vane [J]. Applied Thermal Engineering: part A, 2016, 109: 600-609.

KE Zhaoqing, WANG Jianhua. Numerical investigations of pulsed film cooling on an entire turbine vane [J]. Applied Thermal Engineering, 2015, 87: 117-126.

SARACOGLU B H, PANIAGUA G, SALVADORI S. Energy analysis of pulsating coolant ejection [C]∥ASME Turbo Expo 2014: Turbine Technical Conference and Exposition. New York, NY, USA: ASME, 2014: V02DT44A016.

ZHENG Daren, WANG Xinjun, YUAN Qi. The effect of pulsating parameters on the spatiotemporal variation of flow and heat transfer characteristics in a ribbed channel of a gas turbine blade with the pulsating inlet flow [J]. International Journal of Heat and Mass Transfer, 2020, 153: 119609.

BAEK S I, YAVUZKURT S. Effects of oscillations in the main flow due to thermo acoustic fields in a gas turbine combustor on film cooling [C]∥ASME Turbo Expo 2016: Turbomachinery Technical Conference and Exposition. New York, NY, USA: ASME, 2016: V05CT12A005.

BAEK S I, YAVUZKURT S. Effects of oscillations in the mainstream on film cooling at various blowing ratios [C]∥ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition. New York, NY, USA: ASME, 2017: V05AT12A007.

KWAK J S, HAN J C. Heat-transfer coefficients of a turbine blade-tip and near-tip regions [J]. Journal of Thermophysics and Heat Transfer, 2003, 17(3): 297-303.

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

上游横向间断肋布置方式对气膜冷却性能的影响

张角凹坑气膜孔对双层壁气膜冷却特性的影响

气膜孔缺陷对冷却性能影响不确定性量化研究

带肋曲面双层壁偏转内流与传热冷却特性数值研究

涡轮叶栅前缘区域叶片与端壁交互气膜冷却作用数值研究