多翼离心风机双圆弧叶片的参数优化设计及气动性能分析

王加浩; 刘小民; 田晨晔; 乔洋; 王越; 席光; 龚东巧

doi:10.7652/xjtuxb202203010

您当前的位置：

首页 >

文章列表页 >

多翼离心风机双圆弧叶片的参数优化设计及气动性能分析

更新时间：2025-07-09

- 多翼离心风机双圆弧叶片的参数优化设计及气动性能分析
- Parametric Optimization Design of Double-Circular Arc Blade Used in Multi-Blade Centrifugal Fan and Its Aerodynamic Analysis
- 西安交通大学学报 2022年56卷第3期页码：94-104
- 作者机构：
  
  西安交通大学能源与动力工程学院,西安,710049
- 作者简介：
- 基金信息：
  
  : 2021-06-26。作者简介: 王加浩(1995—),男,博士生;刘小民(通信作者),男,教授,博士生导师。基金项目: 国家重点研发计划资助项目(2019YFB1504601)
- DOI：10.7652/xjtuxb202203010
  中图分类号： TH432
- 网络首发：2022-03-10，
  
  纸质出版：2022
- 稿件说明：
移动端阅览
王加浩, 刘小民, 田晨晔, 等. 多翼离心风机双圆弧叶片的参数优化设计及气动性能分析[J]. 西安交通大学学报, 2022,56(3):94-104.

Parametric Optimization Design of Double-Circular Arc Blade Used in Multi-Blade Centrifugal Fan and Its Aerodynamic Analysis[J]. 2022, 56(3): 94-104.
王加浩, 刘小民, 田晨晔, 等. 多翼离心风机双圆弧叶片的参数优化设计及气动性能分析[J]. 西安交通大学学报, 2022,56(3):94-104. DOI： 10.7652/xjtuxb202203010.

Parametric Optimization Design of Double-Circular Arc Blade Used in Multi-Blade Centrifugal Fan and Its Aerodynamic Analysis[J]. 2022, 56(3): 94-104. DOI： 10.7652/xjtuxb202203010.

摘要

为改善多翼离心风机气动性能和噪声特性

结合双圆弧叶片具有较高流道设计自由度的特点

本文以性能较优的单圆弧叶片多翼离心风机为基础

通过CFD与实验相结合的方法对双圆弧叶片进行全参数匹配优化设计。以0 Pa静压工况下风机风量为优化目标

采用Box-Behnken响应面实验设计方法对双圆弧叶片的进口角、出口角、内外径比、拱点圆直径以及中心角进行参数方案设计

获得了46组样本空间。通过对设计参数和样本结果进行二次回归拟合

得到了双圆弧叶片参数与风量的函数关系及最优参数组合。结果表明

进口角和出口角在所有主效应中对风量的影响灵敏度最高

而进口角-出口角以及内外径比-中心角在所有交互效应中对风量的影响灵敏度最高。通过CFD和FW-H声类比方法对风机的气动性能和声场进行数值计算

计算结果表明优化风机的风量较原型风机增加了118 m

·h

-1

相对提升9.7%。优化叶片能够有效抑制叶间流道内旋涡流的生成和发展

叶片的进、出口角与气流的进、出口流动冲角吻合度更高

有效减小了叶片前缘气流冲击产生的压力脉动以及尾迹流与蜗壳的非定常相互作用。实验结果表明

优化风机功率较原型机降低了4.7%

噪声下降了1.8 dB。

Abstract

In order to improve the aerodynamic performance and noise characteristics of multi-blade centrifugal fan

combining with the characteristics of high degree of freedom in the design of inter-blade flow channel of double-arc blade and based on a single-arc blade multi-blade centrifugal fan with better performance

a full parameter matching optimization design of double-arc blade is carried out through the combination of CFD and experiments. Taking the air volume of the fan under 0 Pa static pressure condition as the optimization goal

the Box-Behn

ken response surface experimental design method is used to determine the inlet angle

outlet angle

inner to outer diameter ratio

arch point diameter and central angle for parameter design

and 46 sets of sample spaces are obtained. Through the quadratic regression fitting of the design parameters and the sample results

the functional relationship between the parameters of the double-arc blade and the air volume

as well as the optimal parameter combination

is obtained. The results show that the inlet angle and outlet angle have the highest sensitivity to the air volume in all main effects

while the inlet angle

the outlet angle

the inner diameter to outer diameter ratio and the central angle have the highest sensitivity to air volume in all interaction effects. The CFD and FW-H methods are used to calculate the aerodynamic performance and sound field characteristics of the optimized double-arc blade fan and the prototype fan. The results show that the air volume of the optimized fan increases by 118 m

·h

-1

compared to the prototype fan

with a relative increases of 9.7%. The optimized blade can effectively suppress the generation and development of vortex flow in the inter-blade flow channel. The inlet angle and outlet angle of the blade are more consistent with the inlet and outlet flow angles of the airflow

which effectively reduces the pressure pulsation caused by the impact of the blade leading edge and the unsteady interaction of wake flow and volute. The test results show that the power of the fan under the same air volume is reduced by 4.7% compared with the prototype

and the noise is reduced by 1.8 dB.

关键词

Keywords

references

赵燕杰, 谭俊飞, 党飞龙, 等. 离心风机集流器的响应面优化设计 [J]. 西安交通大学学报, 2015, 49(11): 49-54.

ZHAO Yanjie, TAN Junfei, DANG Feilong, et al. Optimization design of centrifugal fan inlet collector by response surface methodology [J]. Journal of Xi'an Jiaotong University, 2015, 49(11): 49-54.

秦国良. 多翼离心通风机变安装角性能计算 [J]. 风机技术, 1999(1): 21-22, 28.

QIN Guoliang. Calculation of variable installation angle performance of multi-blade centrifugal fan [J]. Chinese Journal of Turbomachinery, 1999(1): 21-22, 28.

ADACHI T, SUGITA N, YAMADA Y. Study on the performance of a sirocco fan(optimum design of blade shape)[J]. International Journal of Rotating Machinery, 2001, 7(6): 405-414.

李淼, 赵军. 小型多翼离心风机叶片斜切分析及试验研究 [J]. 风机技术, 2012(4): 9-12, 17.

LI Miao, ZHAO Jun. Research on beveling impellers in a miniature forward-curved multi-blade centrifugal fan and performance tests [J]. Chinese Journal of Turbomachinery, 2012(4): 9-12, 17.

WANG Ke, JU Yaping, ZHANG Chuhua. Experimental and numerical investigations on effect of blade trimming on aerodynamic performance of squirrel cage fan [J]. International Journal of Mechanical Sciences, 2020, 177: 105579.

熊仲营, 王梦豪, 刘小民, 等. 采用仿鱼形叶片的多翼离心风机性能研究 [J]. 西安交通大学学报, 2018, 52(11): 22-29.

XIONG Zhongying, WANG Menghao, LIU Xiaomin, et al. Study on the aerodynamic performance of multi-blade centrifugal fan with bionic blades inspired by carangiform fish [J]. Journal of Xi'an Jiaotong University, 2018, 52(11): 22-29.

王梦豪, 吴立明, 刘小民, 等. 采用仿鸮翼叶片降低空调用离心风机气动噪声的研究 [J]. 西安交通大学学报, 2018, 52(6): 55-61.

WANG Menghao, WU Liming, LIU Xiaomin, et al. A study on noise reduction of centrifugal fan in air conditioner by using the bionic blade inspired by the owl wing [J]. Journal of Xi'an Jiaotong University, 2018, 52(6): 55-61.

刘小民, 汤虎, 王星, 等. 苍鹰翼尾缘结构的单元仿生叶片降噪机理研究 [J]. 西安交通大学学报, 2012, 46(1): 35-41.

LIU Xiaomin, TANG Hu, WANG Xing, et al. Noise-reduction mechanism of bionic coupling blade based on the trailing edge of goshawk wing [J]. Journal of Xi'an Jiaotong University, 2012, 46(1): 35-41.

何立博, 姜涛, 李志峰, 等. 多翼离心风机叶轮的正交设计与试验分析 [J]. 流体机械, 2016, 44(9): 7-11, 30.

HE Libo, JIANG Tao, LI Zhifeng, et al. Orthogonal design and experiment analysis of multi-blades centrifugal fan impeller [J]. Fluid Machinery, 2016, 44(9): 7-11, 30.

李云龙, 郭朋华, 何立博, 等. 油烟机内多翼离心风机的响应面优化设计 [J]. 工程热物理学报, 2018, 39(5): 1056-1062.

LI Yunlong, GUO Penghua, HE Libo, et al. Optimization of squirrel-cage fan in range hood based on response surface methodology [J]. Journal of Engineering Thermophysics, 2018, 39(5): 1056-1062.

肖千豪, 王军, 蒋博彦, 等. 多翼离心风机叶片参数化及多目标优化研究 [J]. 工程热物理学报, 2020, 41(12): 2977-2981.

XIAO Qianhao, WANG Jun, JIANG Boyan, et al. Parametric and multi-objective optimization of the squirrel cage fan [J]. Journal of Engineering Thermophysics, 2020, 41(12): 2977-2981.

王湛. 双圆弧叶片多翼风机内流场的数值模拟及叶型研究 [D]. 济南: 山东大学, 2007: 14-30.

王珂, 琚亚平, 张楚华. 基于分组模型及仿生蜗舌的多翼离心风机设计 [J]. 工程热物理学报, 2017, 38(8): 1671-1675.

WANG Ke, JU Yaping, ZHANG Chuhua. Design of multi-blade centrifugal fan based on grouping model and bionic volute tongue [J]. Journal of Engineering Thermophysics, 2017, 38(8): 1671-1675.

GALLAGHER E, O'BRIEN C M, SCANNELL A G M, et al. Use of response surface methodology to produce functional short dough biscuits [J]. Journal of Food Engineering, 2003, 56(2/3): 269-271.

LI Dian, LIU Xiaomin, HU Fujia, et al. Effect of trailing-edge serrations on noise reduction in a coupled bionic aerofoil inspired by barn owls [J]. Bioinspiration Biomimetics, 2020, 15(1): 016009.

PREZELJ J, NOVAKOVIAC'U T. Centrifugal fan with inclined blades for vacuum cleaner motor [J]. Applied Acoustics, 2018, 140: 13-23.

王雷, 刘小民, 刘刚, 等. 轴流风机仿生耦合叶片降噪机理研究 [J]. 西安交通大学学报, 2020, 54(11): 81-90.

WANG Lei, LIU Xiaomin, LIU Gang, et al. Noise reduction mechanism of bionic coupled blades of axial flow fan [J]. Journal of Xi'an Jiaotong University, 2020, 54(11): 81-90.

WU Liming, LIU Xiaomin, WANG Menghao. Effects of bionic volute tongue on aerodynamic performance and noise characteristics of centrifugal fan used in the air-conditioner [J]. Journal of Bionic Engineering, 2020, 17(4): 780-792.

LI Dian, LIU Xiaomin. A comparative study on aerodynamic performance and noise characteristics of two kinds of long-eared owl wing models [J]. Journal of Mechanical Science and Technology, 2017, 31(8): 3821-3830.

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

内凹式蜗舌对多翼离心风机气动性能和噪声影响的研究

采用仿鱼形叶片的多翼离心风机性能研究

跨声速压气机转子通用k-ω湍流模型的机器学习辅助优化

仿鸮翼前网罩对环状叶轮循环扇性能的影响

曲面蜗壳对多翼离心风机气动噪声影响的数值和实验研究