隐式曲面梯度多孔结构拓扑优化设计方法

孙鹏飞; 张跃; 尹鹏; 刘宏磊; 李宝童

doi:10.7652/xjtuxb202201010

您当前的位置：

首页 >

文章列表页 >

隐式曲面梯度多孔结构拓扑优化设计方法

更新时间：2025-05-08

- 隐式曲面梯度多孔结构拓扑优化设计方法
- A Topology Optimization Design Method of Graded Cellular Structures with Implicit Surfaces
- 西安交通大学学报 2022年56卷第1期页码：85-95
- 作者机构：
  
  1. 西安交通大学机械工程学院,西安,710049
  2. 西安交通大学现代设计及转子轴承系统教育部重点实验室,西安,710049
- 作者简介：
- 基金信息：
  
  : 2021-06-21。作者简介: 孙鹏飞(1996—),男,硕士生;李宝童(通信作者),男,教授,博士生导师。基金项目: 国家自然科学基金资助项目(51775414)
- DOI：10.7652/xjtuxb202201010
  中图分类号： TH122
- 网络首发：2022-01-10，
  
  纸质出版：2022
- 稿件说明：
移动端阅览
孙鹏飞, 张跃, 尹鹏, 等. 隐式曲面梯度多孔结构拓扑优化设计方法[J]. 西安交通大学学报, 2022,56(1):85-95.

A Topology Optimization Design Method of Graded Cellular Structures with Implicit Surfaces[J]. 2022, 56(1): 85-95.
孙鹏飞, 张跃, 尹鹏, 等. 隐式曲面梯度多孔结构拓扑优化设计方法[J]. 西安交通大学学报, 2022,56(1):85-95. DOI： 10.7652/xjtuxb202201010.

A Topology Optimization Design Method of Graded Cellular Structures with Implicit Surfaces[J]. 2022, 56(1): 85-95. DOI： 10.7652/xjtuxb202201010.

摘要

为实现多孔单胞构型对多孔结构功能特性的调控

提出隐式曲面梯度多孔结构拓扑优化设计方法。在三周期极小曲面隐式水平集函数中引入罚函数

保证小体积分数下曲面的连续性。对惩罚的隐式函数线性加权构造混合水平集函数

实现多孔结构混合参数化建模。采用数值均匀化法评估多孔结构的宏观等效弹性属性

并通过径向基插值函数构建等效弹性张量关于混合权重因子的显式表达式。以混合权重因子为设计变量

建立柔度最小化拓扑优化模型并采用优化准则法求解。引入Heaviside函数建立高阶连续插值模型

保证梯度多孔结构的高阶连续性。数值案例和实验结果表明

相比于均布多孔结构

所设计的梯度多孔结构的鲁棒性和承载特性更优

且不同单胞构型的梯度多孔结构功能特性相异。所提方法能有效应用三周期极小曲面梯度多孔结构设计

实现多孔单胞构型对结构功能特性的调控

丰富了多孔结构的力学内涵。

Abstract

To adjust the functional characteristics of cellular structures via cellular configurations

a topology optimization design method of graded cellular structures(GCS)with implicit surfaces is proposed. A penalty function is introduced to the implicit level set function of the triply periodic minimal surface(TPMS)for ensuring the continuity of TPMS under low volume fraction. The punished functions are weighted to construct a hybrid level set function to realize the hybrid parametric modeling of cellular structures. The macroscopic equivalent elastic characteristics of the cellular structures are evaluated by the numerical homogenization method. The explicit expression of the equivalent elasticity tensor with respect to the weight is built with radial basis interpolation function. The structural compliance is minimized to establish the topology optimization model

and the weight factor is taken as the design variable. The model is solved by the optimality criteria method. High-order continuous interpolation model is built by introducing Heaviside function to ensure the high-order continuity of GCS. Numerical examples and experimental results show that compared with the uniform cellular structures

the designed GCSs possess more superior robustness and load-bearing capacity

and the GCSs with different cellular configurations have diverse functional characteristics. The proposed method can be effectively applied to the design of TPMS-based GCS to realize the adjustment of the functional characteristics via cellular configurations

enriching the mechanical connotation of cellular structures.

关键词

Keywords

references

QIN Zhao, JUNG G S, KANG M J, et al. The mechanics and design of a lightweight three-dimensional graphene assembly [J]. Science Advances, 2017, 3(1): e1601536.

SYCHOV M M, LEBEDEV L A, DYACHENKO S V, et al. Mechanical properties of energy-absorbing structures with triply periodic minimal surface topology [J]. Acta Astronautica, 2018, 150: 81-84.

李响, 周幼辉, 童冠, 等. 超轻多孔类蜂窝夹心结构创新构型及其力学性能 [J]. 西安交通大学学报, 2014, 48(9): 88-94.

LI Xiang, ZHOU Youhui, TONG Guan, et al. Innovating configuration and mechanical properties of the core for ultralight and porous quasi-honeycomb sandwich structure [J]. Journal of Xi'an Jiaotong University, 2014, 48(9): 88-94.

CANSIZOGLU O, CORMIER D, HARRYSON O, et al. An evaluation of non-stochastic lattice structures fabricated via electron beam melting [C]∥Proceedings of the 2006 International Solid Freeform Fabrication Symposium. Austin, Texas, USA: University of Texas at Austin, 2006: 209-219.

CHEAH C M, CHUA C K, LEONG K F, et al. Development of a tissue engineering scaffold structure library for rapid prototyping: part 1 Investigation and classification [J]. The International Journal of Advanced Manufacturing Technology, 2003, 21(4): 291-301.

OSHER S, FEDKIW R. Level set methods and dynamic implicit surfaces [M]. Berlin, Germany: Springer, 2003: 1-275.

SIGMUND O. Materials with prescribed constitutive parameters: an inverse homogenization problem [J]. International Journal of Solids and Structures, 1994, 31(17): 2313-2329.

XIA Liang, BREITKOPF P. Design of materials using topology optimization and energy-based homogenization approach in Matlab [J]. Structural and Multidisciplinary Optimization, 2015, 52(6): 1229-1241.

LI Dawei, LIAO Wenhe, DAI Ning, et al. Comparison of mechanical properties and energy absorption of sheet-based and strut-based gyroid cellular structures with graded densities [J]. Materials, 2019, 12(13): 2183.

MASKERY I, AREMU A O, PARRY L, et al. Effective design and simulation of surface-based lattice structures featuring volume fraction and cell type grading [J]. Materials and Design, 2018, 155: 220-232.

HAN Lu, CHE Shunai. An overview of materials with triply periodic minimal surfaces and related geometry: from biological structures to self-assembled systems [J]. Advanced Materials, 2018, 30(17): 1705708.

LI Dawei, DAI Ning, TANG Yunlong, et al. Design and optimization of graded cellular structures with triply periodic level surface-based topological shapes [J]. Journal of Mechanical Design, 2019, 141(7): 071402.

YAN Chunze, HAO Liang, HUSSEIN A, et al. Ti-6Al-4V triply periodic minimal surface structures for bone implants fabricated via selective laser melting [J]. Journal of the Mechanical Behavior of Biomedical Materials, 2015, 51: 61-73.

ABUEIDDA D W, ABU AL-RUB R K, DALAQ A S, et al. Effective conductivities and elastic moduli of novel foams with triply periodic minimal surfaces [J]. Mechanics of Materials, 2016, 95: 102-115.

NIKNAM H, AKBARZADEH A H, RODRIGUE D, et al. Architected multi-directional functionally graded cellular plates [J]. Materials Design, 2018, 148: 188-202.

QI Dexing, LU Qiuyu, HE Chunwang, et al. Impact energy absorption of functionally graded chiral honeycomb structures [J]. Extreme Mechanics Letters, 2019, 32: 100568.

杜义贤, 尹鹏, 李荣, 等. 兼具吸能和承载特性的梯度结构宏细观跨尺度拓扑优化设计 [J]. 机械工程学报, 2020, 56(7): 171-180.

DU Yixian, YIN Peng, LI Rong, et al. Macro and micro trans-scale topological optimization design of gradient structure with both energy absorption and load-bearing characteristics [J]. Journal of Mechanical Engineering, 2020, 56(7): 171-180.

付君健, 孙鹏飞, 杜义贤, 等. 基于子结构法的多层级结构拓扑优化 [J]. 中国机械工程, 2021, 32(16): 1937-1944.

FU Junjian, SUN Pengfei, DU Yixian, et al. Hierarchical structure topology optimization based on substructure method [J]. China Mechanical Engineering, 2021, 32(16): 1937-1944.

BENDSOE M P, SIGMUND O. Topology, optimization: theory, methods, and applications [M]. Berlin, Germany: Springer, 2003: 1-370.

GUO Xu, ZHAO Xiaofang, ZHANG Weisheng, et al. Multi-scale robust design and optimization considering load uncertainties [J]. Computer Methods in Applied Mechanics and Engineering, 2015, 283: 994-1009.

BRACKETT D, ASHCROFT I, HAGUE R. Topology optimization for additive manufacturing [C]∥ Proceedings of the 2011 International Solid Freeform Fabrication Symposium. Austin, Texas, USA: University of Texas at Austin, 2011: 348-362.

邢昊, 敬石开, 张贺, 等. 拓扑优化密度映射的非均匀蜂窝结构设计方法 [J]. 计算机辅助设计与图形学学报, 2017, 29(4): 734-741.

XING Hao, JING Shikai, ZHANG He, et al. A non-uniform honeycomb design method based on topology optimization density mapping [J]. Journal of Computer-Aided Design and Computer Graphics, 2017, 29(4): 734-741.

ZHANG Pu, TOMAN J, YU Yiqi, et al. Efficient design-optimization of variable-density hexagonal cellular structure by additive manufacturing: theory and validation [J]. Journal of Manufacturing Science and Engineering, 2015, 137(2): 021004.

张卫红, 孙士平. 多孔材料/结构尺度关联的一体化拓扑优化技术 [J]. 力学学报, 2006, 38(4): 522-529.

ZHANG Weihong, SUN Shiping. Integrated design of porous materials and structures with scale-coupled effect [J]. Chinese Journal of Theoretical and Applied Mechanics, 2006, 38(4): 522-529.

ANDREASSEN E, ANDREASEN C S. How to determine composite material properties using numerical homogenization [J]. Computational Materials Science, 2014, 83: 488-495.

YANG Nan, QUAN Zhi, ZHANG Dawei, et al. Multi-morphology transition hybridization CAD design of minimal surface porous structures for use in tissue engineering [J]. Computer-Aided Design, 2014, 56: 11-21.

YOO D. Heterogeneous minimal surface porous scaffold design using the distance field and radial basis functions [J]. Medical Engineering Physics, 2012, 34(5): 625-639.

WANG Yiqiang, CHEN Feifei, WANG M Y. Concurrent design with connectable graded microstructures [J]. Computer Methods in Applied Mechanics and Engineering, 2017, 317: 84-101.

CRAMER A D, CHALLIS V J, ROBERTS A P. Microstructure interpolation for macroscopic design [J]. Structural and Multidisciplinary Optimization, 2016, 53(3): 489-500.

ZONG Hongming, LIU Hui, MA Qingping, et al. VCUT level set method for topology optimization of functionally graded cellular structures [J]. Computer Methods in Applied Mechanics and Engineering, 2019, 354: 487-505.

SIGMUND O. A 99 line topology optimization code written in Matlab [J]. Structural and Multidisciplinary Optimization, 2001, 21(2): 120-127.

-------

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

三周期极小曲面通道内流动换热特性实验研究

采用拓扑优化液冷与相变材料协同的大圆柱电池热管理

管壳式水合盐化学储热反应器内传热结构拓扑优化

面向金属泡沫散热器设计的自然对流拓扑优化

桁架结构拓扑及截面尺寸优化设计方法