超声检测中利用盲解卷积的重叠回波分离方法

贺琛; 李兵; 高飞

doi:10.7652/xjtuxb202112015

您当前的位置：

首页 >

文章列表页 >

超声检测中利用盲解卷积的重叠回波分离方法

更新时间：2025-07-09

- 超声检测中利用盲解卷积的重叠回波分离方法
- An Overlapping Echo Separation Method Using Blind Deconvolution in Ultrasonic Testing
- 西安交通大学学报 2021年55卷第12期页码：129-137
- 作者机构：
  
  西安交通大学机械制造系统工程国家重点实验室,西安,710049
- 作者简介：
- 基金信息：
  
  : 2021-04-30。作者简介: 贺琛(1996—),男,硕士生;李兵(通信作者),男,教授,博士生导师。基金项目: 航空发动机及燃气轮机重大专项基础研究资助项目(2017-VII-0008-0101)
- DOI：10.7652/xjtuxb202112015
  中图分类号： TG115.28
- 网络首发：2021-12-10，
  
  纸质出版：2021
- 稿件说明：
移动端阅览
贺琛, 李兵, 高飞. 超声检测中利用盲解卷积的重叠回波分离方法[J]. 西安交通大学学报, 2021,55(12):129-137.

An Overlapping Echo Separation Method Using Blind Deconvolution in Ultrasonic Testing[J]. 2021, 55(12): 129-137.
贺琛, 李兵, 高飞. 超声检测中利用盲解卷积的重叠回波分离方法[J]. 西安交通大学学报, 2021,55(12):129-137. DOI： 10.7652/xjtuxb202112015.

An Overlapping Echo Separation Method Using Blind Deconvolution in Ultrasonic Testing[J]. 2021, 55(12): 129-137. DOI： 10.7652/xjtuxb202112015.

摘要

为了解决超声检测技术在被测件近表面位置容易产生回波信号重叠

导致近表面缺陷定位误差较大的问题

提出了一种基于盲解卷积的超声重叠回波分离方法。该方法首先对超声回波信号进行傅里叶逆变换和平滑处理

实现对脉冲响应函数初始化; 然后分别对反射序列函数和脉冲响应函数建立凸优化解卷积模型

并使用分裂Bregman算法与交替方向乘子算法(ADMM)对两者进行交替迭代求解; 最后

通过判断是否满足停止条件

获得反射序列函数与脉冲响应函数的估计值

从而实现对超声重叠回波的分离。仿真实验表明:该方法在不同强度的噪声干扰下均可以经过10次左右的交替迭代实现对重叠回波的有效分离

对噪声干扰具有良好的鲁棒性; 该方法将近表面缺陷的定位误差减小到0.97%

适用于实际超声检测。

Abstract

An ultrasonic overlapping echo separation method based on blind deconvolution is proposed to solve the problem of echo signal overlap in ultrasonic testing technology

which may result in large positioning error of near surface defects. Firstly

the ultrasonic echo signal is processed by inverse Fourier transform and smoothing technique to initialize the impulse response function. Then

convex optimal deconvolution models are established for a reflection sequence function and an impulse response function respectively

and the split Bregman algorithm and the alternating direction multiplier algorithm(ADMM)are alternatively used to solve the both models. Finally

the estimated values of the reflection sequence function and the impulse response function are obtained through judging whether the stop condition is satisfied

so as to realize the separation of ultrasonic overlap echo. Simulation and experimental results show that the proposed method effectively separates the overlapping echoes after 10 alternating iterations under different intensity of noise interference

and has good robustness to noise interference. This method reduces the positioning error of near surface defects to 0.97%

and is suitable for practical ultrasonic testing.

关键词

Keywords

references

周正干, 孙广开. 先进超声检测技术的研究应用进展 [J]. 机械工程学报, 2017, 53(22): 1-10.

ZHOU Zhenggan, SUN Guangkai. New progress of the study and application of advanced ultrasonic testing technology [J]. Journal of Mechanical Engineering, 2017, 53(22): 1-10.

武玉鹏, 张博, 李经明, 等. 航空发动机整体叶环中纤维断丝超声检测方法 [J]. 金属学报, 2020, 56(8): 1175-1184.

WU Yupeng, ZHANG Bo, LI Jingming, et al. Ultrasonic detection for fiber broken in aero-engine integral bladed ring [J]. Acta Metallurgica Sinica, 2020, 56(8): 1175-1184.

王韦强, 马官兵, 王彬, 等. 核电厂围板螺栓超声检测技术研究 [J]. 核动力工程, 2020, 41(2): 40-44.

WANG Weiqiang, MA Guanbing, WANG Bin, et al. Study on ultrasonic inspection of baffle bolts in nuclear power plants [J]. Nuclear Power Engineering, 2020, 41(2): 40-44.

GUAN Shanyue, WANG Xiaokai, HUA Lin, et al. Quantitative ultrasonic testing for near-surface defects of large ring forgings using feature extraction and GA-SVM [J]. Applied Acoustics, 2021, 173: 107714.

郑冠儒, 张慧, 李志, 等. 基于叠加法消除CMUT测量拖尾的研究 [J]. 振动与冲击, 2019, 38(2): 219-225.

ZHENG Guanru, ZHANG Hui, LI Zhi, et al. Elimination of ultrasonic tailing based on the superposition method [J]. Journal of Vibration and Shock, 2019, 38(2): 219-225.

HERNÁNDEZ Á, UREÑA J, MAZO M, et al. Reduction of blind zone in ultrasonic transmitter/receiver transducers [J]. Sensors and Actuators: A Physical, 2007, 133(1): 96-103.

PALA S, SHAO Zhichun, PENG Yande, et al. Improved Ring-Down time and axial resolution of pMUTs via a phase-shift excitation scheme [C]∥2021 IEEE 34th International Conference on Micro Electro Mechanical Systems. Piscataway, NJ, USA: IEEE, 2021: 390-393.

LIU Xinxin, CHEN Xuying, LE Xianhao, et al. Optimization of pMUTs driving waveform based on phase delay to reduce attenuation vibration [C]∥2018 IEEE 13th Annual International Conference on Nano/Micro Engineered and Molecular Systems. Piscataway, NJ, USA: IEEE, 2018: 582-585.

WANG Xubo, HE Leming, MA Youcao, et al. Development of broadband high-frequency piezoelectric micromachined ultrasonic transducer array [J]. Sensors, 2021, 21(5): 1823.

张海燕, 刘建全, 张辉, 等. 扩散场重建格林函数检测钢轨近表面缺陷 [J]. 应用声学, 2019, 38(5): 774-781.

ZHANG Haiyan, LIU Jianquan, ZHANG Hui, et al. Diffusion field reconstruct Green's function to detect near-surface defects of rails [J]. Journal of Applied Acoustics, 2019, 38(5): 774-781.

LIAN Meng, LIU Haibo, BO Qile, et al. An improved matching pursuit method for overlapping echo separation in ultrasonic thickness measurement [J]. Measurement Science and Technology, 2019, 30(6): 065001.

JIN Haoran, CHEN Jian, YANG Keji. A blind deconvolution method for attenuative materials based on asymmetrical Gaussian model [J]. The Journal of the Acoustical Society of America, 2016, 140(2): 1184-1191.

LI Min, LI Xue, GAO Chenxing, et al. Acoustic microscopy signal processing method for detecting near-surface defects in metal materials [J]. NDT E International, 2019, 103: 130-144.

LI Xiang, LI Xunbo, LIANG Wei, et al. 0-norm regularized minimum entropy deconvolution for ultrasonic NDT E [J]. NDT E International, 2012, 47: 80-87.

GAO Xuyang, SHI Yibing, DU Kai, et al. Sparse blind deconvolution with nonconvex optimization for ultrasonic NDT application [J]. Sensors, 2020, 20(23): 6946.

REPETTI A, PHAM M Q, DUVAL L, et al. Euclid in a taxicab: sparse blind deconvolution with smoothed 1/2 regularization [J]. IEEE Signal Processing Letters, 2015, 22(5): 539-543.

IQBAL N, LIU Entao, MCCLELLAN J H, et al. Sparse multichannel blind deconvolution of seismic data via spectral projected-gradient [J]. IEEE Access, 2019, 7: 23740-23751.

GUAN Jian, WANG Xuan, WANG Wenwu, et al. Sparse blind speech deconvolution with dynamic range regularization and indicator function [J]. Circuits, Systems, and Signal Processing, 2017, 36(10): 4145-4160.

GHOLAMI A, SACCHI M D. A fast and automatic sparse deconvolution in the presence of outliers [J]. IEEE Transactions on Geoscience and Remote Sensing, 2012, 50(10): 4105-4116.

李钟晓, 李振春. 基于交替分裂Bregman迭代算法的鲁棒多道预测反褶积方法 [J]. 石油地球物理勘探, 2017, 52(4): 678-688.

LI Zhongxiao, LI Zhenchun. Robust multichannel predictive deconvolution based on the alternating split Bregman iteration algorithm [J]. Oil Geophysical Prospecting, 2017, 52(4): 678-688.

HEREDIA-JUESAS J, TIRADO L, MARTINEZ-LORENZO J A. Fast source reconstruction via ADMM with elastic net regularization [C]∥2018 IEEE International Symposium on Antennas and Propagation USNC/URSI National Radio Science Meeting. Piscataway, NJ, USA: IEEE, 2018: 539-540.

ZHU Tao. New over-relaxed monotone fast iterative shrinkage-thresholding algorithm for linear inverse problems [J]. IET Image Processing, 2019, 13(14): 2888-2896.

潘树林, 闫柯, 李凌云, 等. 自适应步长FISTA算法稀疏脉冲反褶积 [J]. 石油地球物理勘探, 2019, 54(4): 737-743.

PAN Shulin, YAN Ke, LI Lingyun, et al. Sparse-spike deconvolution based on adaptive step FISTA algorithm [J]. Oil Geophysical Prospecting, 2019, 54(4): 737-743.

ABDESSALEM B, FARID C. Resolution improvement of ultrasonic signals using sparse deconvolution and variational mode decomposition algorithms [J]. Russian Journal of Nondestructive Testing, 2020, 56(6): 479-489.

WANG Yuepeng, REN Lanlan, ZHANG Zongyuan, et al. Sparsity-promoting elastic net method with rotations for high-dimensional nonlinear inverse problem [J]. Computer Methods in Applied Mechanics and Engineering, 2019, 345: 263-282.

HUMAYOO M, CHENG Xueqi. Parameter Estimation with the ordered 2 regularization via an alternating direction method of multipliers [EB/OL]. [2021-03-12]. https:∥arxiv.org/abs/1909.01519v2.

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

采用试验设计方法的第三代CO2气体箔轴承箔片几何参数敏感性分析

三塔合一间接空冷系统结构参数对夏季运行特性的影响研究

超临界水异常区域热力学特性研究

多工况下离心压气机叶轮-机匣一体联合设计优化

扇贝仿生密封腔室内超临界二氧化碳泄漏流湍动能耗散机理研究