涡轮叶片厚壁带肋通道流动与传热性能的预测和优化

席雷; 高建民; 徐亮; 赵振; 李云龙

doi:10.7652/xjtuxb202112004

您当前的位置：

首页 >

文章列表页 >

涡轮叶片厚壁带肋通道流动与传热性能的预测和优化

专题强化传热 | 更新时间：2025-07-09

- 涡轮叶片厚壁带肋通道流动与传热性能的预测和优化
- Prediction and Optimization on Flow and Heat Transfer Performance of Ribbed Thick-Wall Channel in Turbine Blade
- 西安交通大学学报 2021年55卷第12期页码：25-34
- 作者机构：
  
  西安交通大学机械制造系统工程国家重点实验室,西安,710049
- 作者简介：
- 基金信息：
  
  : 2021-07-19。作者简介: 席雷(1990—),男,助理教授;徐亮(通信作者),男,副教授。基金项目: 国家自然科学基金资助项目(51876157);陕西省自然科学基金资助项目(2019JM-096);中央高校基本科研业务费专项资金资助项目(xjj2018044)
- DOI：10.7652/xjtuxb202112004
  中图分类号： TK47
- 网络首发：2021-12-10，
  
  纸质出版：2021
- 稿件说明：
移动端阅览
席雷, 高建民, 徐亮, 等. 涡轮叶片厚壁带肋通道流动与传热性能的预测和优化[J]. 西安交通大学学报, 2021,55(12):25-34.

Prediction and Optimization on Flow and Heat Transfer Performance of Ribbed Thick-Wall Channel in Turbine Blade[J]. 2021, 55(12): 25-34.
席雷, 高建民, 徐亮, 等. 涡轮叶片厚壁带肋通道流动与传热性能的预测和优化[J]. 西安交通大学学报, 2021,55(12):25-34. DOI： 10.7652/xjtuxb202112004.

Prediction and Optimization on Flow and Heat Transfer Performance of Ribbed Thick-Wall Channel in Turbine Blade[J]. 2021, 55(12): 25-34. DOI： 10.7652/xjtuxb202112004.

摘要

为提高燃气轮机涡轮叶片中弦区带肋通道的传热效果

基于已有实验数据开展了雷诺数为10 000～60 000、宽高比为0.25～4.00和肋角度为30°～90°的涡轮叶片厚壁带肋通道流动与传热性能的优化研究。利用Sobol方法分析了厚壁带肋通道流动及传热性能对雷诺数、宽高比、肋角度的全局敏感性; 采用BP神经网络对60组实验数据进行了多输入、多输出的非线性拟合

得到了可以准确预测厚壁带肋通道平均努塞尔数、摩擦系数和综合热力系数的神经网络模型

并结合遗传算法对厚壁带肋通道在研究范围内的不同工况下进行结构优化。结果表明:厚壁带肋通道的传热性能对进口雷诺数变化的敏感性很高

而对通道宽高比和肋角度变化的敏感性较低; 流动性能对通道宽高比变化的敏感性非常高

对肋角度变化的敏感性较低

而对进口雷诺数变化的不敏感。训练得到的BP神经网络模型对平均努塞尔数、摩擦系数和综合热力系数的最大预测偏差分别为3.9%、2.8%和4.6%。最优宽高比和最优肋角度都随着雷诺数的增大而增大。不同雷诺数时

基于平均努塞尔数优化得到的最优宽高比和肋角度分别在2.23～2.75和41.12°～55.16°; 基于综合热力性能优化得到的最优宽高比和肋角度分别在1.75～2.11和56.68°～65.2°。该研究可为未来重型燃机叶片冷却结构设计提供参考。

Abstract

To improve heat transfer effect of internal cooling channel in the mid-chord region of gas turbine blade

the optimization of flow and heat transfer performance of ribbed thick-wall channel in a turbine blade with Reynolds number ranging from 10 000 to 60 000

aspect ratio ranging from 0.25 to 4.00 and rib angle ranging from 30° to 90° is investigated based on the existing experimental data. Sobol method is used to analyze the global sensitivity of flow and heat transfer performance of the ribbed thick-wall channel to Reynolds number

aspect ratio and rib angle. A BP(back propagation)neural network is used to perform multi-input and multi-output nonlinear fitting for 60 groups of experimental data

and a multi-input and multi-output neural network model is obtained which can accurately predict average Nusselt number

friction factor and comprehensive thermal coefficient of the ribbed thick-wall channel. Then structural parameters of the ribbed thick-wall channel are optimized by using a genetic algorithm under different working conditions. Results show that the heat transfer performance of the ribbed thick-wall channel is highly sensitive to the change of inlet Reynolds number

but is less sensitive to the change of channel aspect ratio and rib angle. The flow performance is highly sensitive to the change of channel aspect ratio

but is less sensitive to the change of rib angle

and insensitive to the change of inlet Reynolds number. The maximum prediction deviations of the trained BP neural network model for average Nusselt number

friction factor and comprehensive thermal coefficient are 3.9%

2.8% and 4.6% respectively. The optimal values of aspect ratio and rib angle increase with the increase of Reynolds number. At different Reynolds numbers

the optimal aspect ratio and rib angle based on the optimization of average Nusselt number are from 2.23 to 2.75 and 41.12° to 55.16°

respectively

while the optimal aspect ratio and rib angle based on the optimization of comprehensive thermal performance are from 1.75 to 2.11 and 56.68° to 65.2°

respectively. This research may provide reference for the design of blade cooling structure of heavy duty gas turbine in future.

关键词

Keywords

references

XU Liang, XI Lei, ZHAO Zhen, et al. Numerical prediction of heat loss from a test ribbed rectangular channel using the conjugate calculations [J]. International Communications in Heat and Mass Transfer, 2018, 96: 98-108.

HAN J C. Advanced cooling in gas turbines 2016 Max Jakob Memorial Award Paper [J]. Journal of Heat Transfer, 2018, 140(11): 113001.

MOHAMMADI A, RAISEE M. Effects of operational and geometrical uncertainties on heat transfer and pressure drop of ribbed passages [J]. Applied Thermal Engineering, 2017, 125: 686-701.

DRITSELIS C D. Large eddy simulation of turbulent channel flow with transverse roughness elements on one wall [J]. International Journal of Heat and Fluid Flow, 2014, 50: 225-239.

KAEWCHOTHONG N, MALIWAN K, TAKEISHI K, et al. Effect of inclined ribs on heat transfer coefficient in stationary square channel [J]. Theoretical and Applied Mechanics Letters, 2017, 7(6): 344-350.

WANG Longfei, WANG Songtao, LIU Wei, et al. Numerical predictions on heat transfer and flow characteristics in a straight channel with different geometric parameters wavy ribs [J]. Applied Thermal Engineering, 2018, 140: 245-265.

WANG Longfei, WANG Songtao, WEN Fengbo, et al. Effects of continuous wavy ribs on heat transfer and cooling air flow in a square single-pass channel of turbine blade [J]. International Journal of Heat and Mass Transfer, 2018, 121: 514-533.

JANG H N, PARK J S, KWAK J S. Experimental study on heat transfer characteristics in a ribbed channel with dimples, semi-spherical protrusions, or oval protrusions [J]. Applied Thermal Engineering, 2018, 131: 734-742.

MOON M A, PARK M J, KIM K Y. Evaluation of heat transfer performances of various rib shapes [J]. International Journal of Heat and Mass Transfer, 2014, 71: 275-284.

刘聪, 王钊, 张宗卫. 带三角形V肋和反向V肋内冷通道强化换热机理研究 [J]. 推进技术, 2019, 40(9): 2040-2049.

LIU Cong, WANG Zhao, ZHANG Zongwei. Investigation on heat transfer augmentation in a inner-cooling passage with triangular V-shaped and inverse V-shaped ribs [J]. Journal of Propulsion Technology, 2019, 40(9): 2040-2049.

JADHAV R S, BALAJI C. Fluid flow and heat transfer characteristics of a vertical channel with detached pin-fin arrays arranged in staggered manner on two opposite endwalls [J]. International Journal of Thermal Sciences, 2016, 105: 57-74.

SEO J W, AFZAL A, KIM K Y. Efficient multi-objective optimization of a boot-shaped rib in a cooling channel [J]. International Journal of Thermal Sciences, 2016, 106: 122-133.

KIM K Y, LEE Y M. Design optimization of internal cooling passage with V-shaped ribs [J]. Numerical Heat Transfer: Part A Applications, 2007, 51(11): 1103-1118.

DARVISH D M, SAFIKHANI H, YAHYAABADI M. Multi-objective optimization of asymmetric V-shaped ribs in a cooling channel using CFD, artificial neural networks and genetic algorithms [J]. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2017, 39(6): 2319-2329.

XI Lei, GAO Jianmin, XU Liang, et al. Study on heat transfer performance of steam-cooled ribbed channel using neural networks and genetic algorithms [J]. International Journal of Heat and Mass Transfer, 2018, 127: 1110-1123.

HAASENRITTER A, WEIGAND B. Optimization of the rib structure inside cooling channels with genetic algorithms [J]. International Journal of Design Nature and Ecodynamics, 2006, 1(2): 116-134.

阮有钢, 刘战胜, 高春, 等. 燃气透平U型通道内部流动换热多目标优化 [J]. 工程热物理学报, 2019, 40(8): 1751-1757.

RUAN Yougang, LIU Zhansheng, GAO Chun, et al. Multi-objective optimization of flow and heat transfer in U bend of internal cooling channels for gas turbine blade [J]. Journal of Engineering Thermophysics, 2019, 40(8): 1751-1757.

龚建英, 高铁瑜, 吴伟烽, 等. 燃机叶片U带肋冷却通道的结构优化 [J]. 压缩机技术, 2019(3): 11-16.

GONG Jianying, GAO Tieyu, WU Weifeng, et al. Structural optimization in U-shaped ribbed cooling channel for gas turbine [J]. Compressor Technology, 2019(3): 11-16.

LIU Jiazeng, GAO Jianmin, GAO Tieyu, et al. Heat transfer characteristics in steam-cooled rectangular channels with two opposite rib-roughened walls [J]. Applied Thermal Engineering, 2013, 50(1): 104-111.

席雷, 徐亮, 高建民, 等. 涡轮叶片厚壁带肋通道冷却性能的实验研究 [J]. 西安交通大学学报, 2021, 55(3): 29-36.

XI Lei, XU Liang, GAO Jianmin, et al. Experimental study on the cooling performance of thick-wall ribbed channels in turbine blade [J]. Journal of Xi'an Jiaotong University, 2021, 55(3): 29-36.

CADINI F, LOMBARDO S S, GIGLIO M. Global reliability sensitivity analysis by Sobol-based dynamic adaptive Kriging importance sampling [J]. Structural Safety, 2020, 87: 101998.

徐志昊, 李良星, 张拯政. 竖直通道内流动沸腾气泡脱离行为的数据驱动分析 [J]. 西安交通大学学报, 2020, 54(11): 175-184.

XU Zhihao, LI Liangxing, ZHANG Zhengzheng. Data driven analysis for departure behavior characteristics of flow boiling bubbles in the vertical channel [J]. Journal of Xi'an Jiaotong University, 2020, 54(11): 175-184.

艾波, 胡军, 张早校, 等. 含缺陷蒸汽发生器管道爆破压力预测的遗传-神经网络算法 [J]. 西安交通大学学报, 2011, 45(9): 84-89.

AI Bo, HU Jun, ZHANG Zaoxiao, et al. GA-BP algorithm based on burst pressure prediction of steam generator tubing [J]. Journal of Xi'an Jiaotong University, 2011, 45(9): 84-89.

RAHIMI M, BEIGZADEH R, PARVIZI M, et al. GMDH-type neural network modeling and genetic algorithm-based multi-objective optimization of thermal and friction characteristics in heat exchanger tubes with wire-rod bundles [J]. Heat and Mass Transfer, 2016, 52(8): 1585-1593.

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

涡轮叶片厚壁带肋通道冷却性能的实验研究

相变冷却换热器动态热响应降阶预测方法研究

气膜孔缺陷对冷却性能影响不确定性量化研究

采用动力学模态分解和长短期记忆网络的压缩空气储气装置流场动态预测方法

新能源汽车热管理系统协同优化策略