基于微观结构简化单元模型的微孔泡沫材料吸声行为研究

张钧哲; 陈天宁; 朱建; 刘志骁

doi:10.7652/xjtuxb202111017

您当前的位置：

首页 >

文章列表页 >

基于微观结构简化单元模型的微孔泡沫材料吸声行为研究

更新时间：2025-07-09

- 基于微观结构简化单元模型的微孔泡沫材料吸声行为研究
- Simplified Microstructural Unit Model for the Study of Sound Absorption Behavior of Microporous Foam Materials
- 西安交通大学学报 2021年55卷第11期页码：154-161
- 作者机构：
  
  西安交通大学机械工程学院,西安,710049
- 作者简介：
- 基金信息：
  
  : 2021-05-13。作者简介: 张钧哲(1992—),男,博士生;陈天宁(通信作者),男,教授,博士生导师。基金项目: 国家自然科学基金资助项目(51675402,51275377)
- DOI：10.7652/xjtuxb202111017
  中图分类号： O424;TB34
- 网络首发：2021-11-10，
  
  纸质出版：2021
- 稿件说明：
移动端阅览
张钧哲, 陈天宁, 朱建, 等. 基于微观结构简化单元模型的微孔泡沫材料吸声行为研究[J]. 西安交通大学学报, 2021,55(11):154-161.

Simplified Microstructural Unit Model for the Study of Sound Absorption Behavior of Microporous Foam Materials[J]. 2021, 55(11): 154-161.
张钧哲, 陈天宁, 朱建, 等. 基于微观结构简化单元模型的微孔泡沫材料吸声行为研究[J]. 西安交通大学学报, 2021,55(11):154-161. DOI： 10.7652/xjtuxb202111017.

Simplified Microstructural Unit Model for the Study of Sound Absorption Behavior of Microporous Foam Materials[J]. 2021, 55(11): 154-161. DOI： 10.7652/xjtuxb202111017.

摘要

针对微孔泡沫材料的吸声系数通过其微观结构尺寸难以定量预测的难题

提出利用微孔泡沫铝的电镜扫描技术建立微孔泡沫铝微观结构的简化单元模型。利用该模型模拟微孔泡沫铝微观结构的拓扑结构

可以建立单元拓扑特征与关键的非声学参数包括静态流阻、黏性特征长度、热特征长度、曲折系数等之间的关系。在简化单元模型的基础上引入开孔率

明确了微孔泡沫材料的孔隙率和曲折度之间的关系

提高了预测微孔泡沫铝吸声系数的准确度。采用B-K阻抗管测量微孔泡沫铝试件的吸声系数

实验测量结果和理论预测结果一致。研究过程中制备的厚度小于30 mm的微孔泡沫铝试件在1 100～6 500 Hz频段内实现了平均吸声系数达0.8的宽频高效吸声。该研究工作可为设计、优化和制备具有更好吸声性能的微孔泡沫材料提供一定的参考。

Abstract

Aiming at the difficulty of quantitatively predicting the sound absorption coefficient of a microstructural foam material through its microstructure size

an SEM method is proposed to establish a simplified unit model of the microstructural aluminum foam. Using this model to simulate the topology of the microstructural aluminum foam

the relationship between the unit's topological characteristics and the key non-acoustic parameters

including static flow resistance

viscous characteristic length

thermal characteristic length

and tortuosity coefficient

can be established. On the basis of the simplified unit model

the open porosity is introduced to clarify the relationship between the porosity and tortuosity of the microstructural foam material. So the accuracy for predicting the sound absorption coefficient of the microstructural aluminum foam is improved. The BK impedance tube is used to measure the sound absorption coefficient of the microstructural aluminum foam specimen

and the experimental measurement results are consistent with the theoretical prediction results. The specimens with a thickness less than 30 mm prepared in this research achieve broad-band and high-efficiency sound absorption

with an average sound absorption coefficient of 0.8 in the 1 100-6 500 Hz frequency band. This research may provide a basis for the design

optimization and preparation of microstructural foam materials with better sound absorption behavior.

关键词

Keywords

references

卢天健, 何德坪, 陈常青, 等. 超轻多孔金属材料的多功能特性及应用 [J]. 力学进展, 2006, 36(4): 517-535.

LU Tianjian, HE Deping, CHEN Changqing, et al. The multi-functionality of ultra-light porous metals and their applications [J]. Advances in Mechanics, 2006, 36(4): 517-535.

张俊, 陈卫华, 任树伟, 等. 高温环境下梯度多孔金属纤维的吸声性能及优化设计 [J]. 西安交通大学学报, 2018, 52(1): 143-150.

ZHANG Jun, CHEN Weihua, REN Shuwei, et al. Sound absorbing properties and optimization design of gradient porous metal fibers in high-temperature environments [J]. Journal of Xi'an Jiaotong University, 2018, 52(1): 143-150.

LIND-NORDGREN E, GÖRANSSON P. Optimising open porous foam for acoustical and vibrational performance [J]. Journal of Sound and Vibration, 2010, 329(7): 753-767.

冯涛, 鲍怀谦, 韩宝坤, 等. 微孔泡沬铝在不同背衬空腔下吸声系数的特点 [J]. 声学技术, 2014, 33(4): 20-22.

FENG Tao, BAO Huaiqian, HAN Baokun, et al. Characteristics of sound absorption coefficient for microcellular foam aluminum under different backing cavities [J]. Technical Acoustics, 2014, 33(4): 20-22.

梁李斯, 张杏, 宋亦非, 等. 泡沫铝吸声性能的研究进展 [J]. 材料导报, 2016, 30(17): 64-71.

LIANG Lisi, ZHANG Xing, SONG Yifei, et al. Advances of sound absorption feature of aluminum foams [J]. Materials Review, 2016, 30(17): 64-71.

ELIZONDO LUNA E M, BARARI F, WOOLLEY R, et al. Casting protocols for the production of open cell aluminum foams by the replication technique and the effect on porosity [J]. Journal of Visualized Experiments, 2014(94): e52268.

赵火平, 尧军平, 龙文元, 等. 真空渗流法制备微孔复合泡沫铝的工艺研究 [J]. 特种铸造及有色合金, 2009, 29(9): 854-857.

ZHAO Huoping, YAO Junping, LONG Wenyuan, et al. Factors influencing preparing micro-pore composite foam aluminum by vacuum infiltration method [J]. Special Casting Nonferrous Alloys, 2009, 29(9): 854-857.

宁景锋, 赵桂平, 穆林, 等. 含有空气背衬层的分层多孔材料的吸声性能研究 [J]. 振动工程学报, 2014, 27(5): 734-740.

NING Jingfeng, ZHAO Guiping, MU Lin, et al. Study on sound absorption properties of multilayer porous material structure backed with an air gap [J]. Journal of Vibration Engineering, 2014, 27(5): 734-740.

张波, 陈天宁, 冯凯, 等. 烧结金属纤维多孔材料的高温吸声性能 [J]. 西安交通大学学报, 2008, 42(11): 1327-1331.

ZHANG Bo, CHEN Tianning, FENG Kai, et al. Sound absorption properties of sintered fibrous metals under high temperature conditions [J]. Journal of Xi'an Jiaotong University, 2008, 42(11): 1327-1331.

赵毅. 多孔材料吸声性能仿真分析与优化 [D]. 重庆: 重庆大学, 2018: 15-19.

REN Shuwei, AO Qingbo, MENG Han, et al. A semi-analytical model for sound propagation in sintered fiber metals [J]. Composites: Part B Engineering, 2017, 126: 17-26.

ZHANG Bo, CHEN Tianning, ZHAO Yuyuan, et al. Numerical and analytical solutions for sound propagation and absorption in porous media at high sound pressure levels [J]. The Journal of the Acoustical Society of America, 2012, 132(3): 1436-1449.

陈卫华, 陈天宁, 王小鹏, 等. 纤维多孔金属的流阻率分形模型研究 [J]. 西安交通大学学报, 2015, 49(6): 132-137.

CHEN Weihua, CHEN Tianning, WANG Xiaopeng, et al. A fractal model of flow resistivity for fibrous porous metals [J]. Journal of Xi'an Jiaotong University, 2015, 49(6): 132-137.

张波, 陈天宁. 高声压激励下多孔金属材料的吸声性能数值计算 [J]. 西安交通大学学报, 2010, 44(3): 58-62, 132.

ZHANG Bo, CHEN Tianning. Numerical calculation of acoustic properties of porous metal at high sound pressure level [J]. Journal of Xi'an Jiaotong University, 2010, 44(3): 58-62, 132.

乔厚, 何锃, 张恒堃, 等. 二维含多孔介质周期复合结构声传播分析 [J]. 物理学报, 2019, 68(12): 239-253.

QIAO Hou, HE Zeng, ZHANG Hengkun, et al. Sound transmission in two-dimensional periodic poroelastic structures [J]. Acta Physica Sinica, 2019, 68(12): 239-253.

JOHNSON D L, KOPLIK J, DASHEN R. Theory of dynamic permeability and tortuosity in fluid-saturated porous media [J]. Journal of Fluid Mechanics, 1987, 176: 379-402.

YANG Xiaohu, LU Tianjian, KIM T. An analytical model for permeability of isotropic porous media [J]. Physics Letters: A, 2014, 378(30/31): 2308-2311.

CHAMPOUX Y, ALLARD J F. Dynamic tortuosity and bulk modulus in air-saturated porous media [J]. Journal of Applied Physics, 1991, 70(4): 1975-1979.

DOUTRES O, ATALLA N, DONG K. Effect of the microstructure closed pore content on the acoustic behavior of polyurethane foams [J]. Journal of Applied Physics, 2011, 110(6): 064901.

YANG X H, REN S W, WANG W B, et al. A simplistic unit cell model for sound absorption of cellular foams with fully/semi-open cells [J]. Composites Science and Technology, 2015, 118: 276-283.

马大猷, 李沛滋, 戴根华, 等. 多孔材料的出流和多孔扩散消声理论 [J]. 物理学报, 1978, 27(6): 631-644.

MA Dayou, LI Peizi, DAI Genhua, et al. The outflow of air from porous materials and theh noise reduction theory of porous diffuser [J]. Acta Physica Sinica, 1978, 27(6): 631-644.

PETER G. Acoustic and vibrational damping in porous solids [J]. Philosophical Transactions of the Royal Society: A Mathematical, Physical and Engineering Sciences, 2006, 364(1838): 89-108.

ZHAI Wei, YU Xiang, SONG Xu, et al. Microstructure-based experimental and numerical investigations on the sound absorption property of open-cell metallic foams manufactured by a template replication technique [J]. Materials Design, 2018, 137: 108-116.

PERROT C, PANNETON R, OLNY X. Periodic unit cell reconstruction of porous media: application to open-cell aluminum foams [J]. Journal of Applied Physics, 2007, 101(11): 113538.

张哲, 王小鹏, 陈天宁, 等. 适用于高温阻抗管的修正传递函数法 [J]. 西安交通大学学报, 2014, 48(5): 118-122.

ZHANG Zhe, WANG Xiaopeng, CHEN Tianning, et al. Modified transfer function method for high temperature impedance tube [J]. Journal of Xi'an Jiaotong University, 2014, 48(5): 118-122.

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

压电磁耦合振动能量俘获系统的非线性模型研究

采用机器学习的大规模并行程序I/O性能建模与预测方法

多工况下离心压气机叶轮-机匣一体联合设计优化

EBSILON软件在热电联产系统优化中的应用综述

混合电解槽阵列协同的风光耦合制氢系统双层多目标优化