车用燃料电池空压机叶轮多工况气动优化设计

肖军; 王艺达; 刘小民; 陈玉辉; 张治平

doi:10.7652/xjtuxb202109005

您当前的位置：

首页 >

文章列表页 >

车用燃料电池空压机叶轮多工况气动优化设计

更新时间：2025-07-09

- 车用燃料电池空压机叶轮多工况气动优化设计
- Multi-Condition Aerodynamic Optimization of the Air Compressor Impeller Used in Fuel-Cell Vehicles
- 西安交通大学学报 2021年55卷第9期页码：39-48
- 作者机构：
  
  合肥通用机械研究院有限公司压缩机技术国家重点实验室,合肥,230031
- 作者简介：
- 基金信息：
  
  : 2021-04-22。作者简介: 肖军(1979—),博士,研究员;刘小民(通信作者),男,教授,博士生导师。基金项目: 国家重点研发计划资助项目(2019YFB1504601)
- DOI：10.7652/xjtuxb202109005
  中图分类号： V231.1
- 网络首发：2021-09-10，
  
  纸质出版：2021
- 稿件说明：
移动端阅览
肖军, 王艺达, 刘小民, 等. 车用燃料电池空压机叶轮多工况气动优化设计[J]. 西安交通大学学报, 2021,55(9):39-48.

Multi-Condition Aerodynamic Optimization of the Air Compressor Impeller Used in Fuel-Cell Vehicles[J]. 2021, 55(9): 39-48.
肖军, 王艺达, 刘小民, 等. 车用燃料电池空压机叶轮多工况气动优化设计[J]. 西安交通大学学报, 2021,55(9):39-48. DOI： 10.7652/xjtuxb202109005.

Multi-Condition Aerodynamic Optimization of the Air Compressor Impeller Used in Fuel-Cell Vehicles[J]. 2021, 55(9): 39-48. DOI： 10.7652/xjtuxb202109005.

摘要

针对燃料电池离心空压机工况多变、过高压比导致燃料电池系统寄生功率过大的问题

基于参数化建模、拉丁超立方抽样、径向基函数神经网络和多目标灰狼优化算法

提出了多目标多工况带约束的燃料电池空压机叶轮气动优化设计方法

自主开发数值程序实现了气动优化的完整设计流程。以某两级燃料电池离心空压机叶轮为优化对象

采用拉丁超立方抽样获得叶轮关键设计变量的样本空间

基于自主流场分析程序计算叶轮样本对应的气动性能目标参数

在此基础上运用神经网络程序建立流场分析代理模型

以设计工况效率及非设计工况效率和压比为目标、设计压比为约束

运用多目标灰狼算法程序进行了叶轮气动设计的多工况多目标全局寻优。计算结果表明

拉丁超立方抽样实现了样本点在设计变量空间的均匀分布

运用神经网络建立的代理模型能够准确描述设计变量与性能目标间的映射关系

与流场计算所得性能目标的最大误差均小于1%

寻优计算获得了设计压比约束下的最优效率及相应的叶轮型线

优化后设计和非设计工况点的叶轮流场低速区减小、熵增降低

两级叶轮设计工况点的等熵效率分别提高2.2%和2%

非设计工况点的效率分别提高2.9%和2.2%。

Abstract

Aiming at variable working conditions and the problem of excessive parasitic power of fuel-cell system caused by over high pressure ratio of fuel-cell centrifugal compressor

a multi-objective and multi-condition aerodynamic optimal design method with constraints for fuel-cell air compressor impeller is proposed based on parametric design

Latin hypercube sampling

radial basis function neural network and multi-objective grey wolf optimization algorithm. The numerical programs are developed independently to realize the design process of aerodynamic optimization. Taking the impellers of a two-stage fuel-cell centrifugal air compressor as the optimization objects

Latin hypercube sampling is used to obtain the sample space of the key design variables of the impeller. Based on the internal code of flow-field analysis

the corresponding aerodynamic performance target parameters of the impeller samples are calculated. On this basis

the neural network program is used to establish the flow-field analysis surrogate model. Taking the efficiency of design point and the efficiency and pressure ratio of non-design point as objectives

and the design pressure ratio as constraint

the multi-objective grey wolf algorithm program is used to carry out the multi-condition and multi-objective aerodynamic optimization of impellers. The results show that the Latin hypercube sampling achieves the uniform distribution of sample points in the design variable space

and the surrogate model established by neural network can accurately describe the mapping relationship between the design variables and the performance targets

and the maximum error between the performance targets obtained by the surrogate model and flow-field calculation is less than 1%. The optimal efficiency and the corresponding impeller profile under the constraint of design pressure ratio are obtained by optimization calculation. After optimization

the low velocity region and entropy increment in the impeller flow field at the design and non-design operating points both reduced

and the isentropic efficiencies of the two impellers at the design operating point were increased by 2.2% and 2%

respectively

and the efficiencies of the two impellers at the non-design operating point were increased by 2.9% and 2.2%

respectively.

关键词

Keywords

references

左曙光, 韦开君, 吴旭东, 等. 采用Kriging模型的离心压缩机叶轮多目标参数优化 [J]. 农业工程学报, 2016, 32(2): 77-83.

ZUO Shuguang, WEI Kaijun, WU Xudong, et al. Multi-objective parameter optimization of centrifugal compressor impeller with Kriging model [J]. Transactions of the Chinese Society of Agricultural Engineering, 2016, 32(2): 77-83.

张良, 许思传, 万玉. PEM燃料电池用空压机多参数多目标优化 [J]. 电源技术, 2016, 40(1): 81-83.

ZHANG Liang, XU Sichuan, WAN Yu. Multi-objective and multi-parameter optimization for centrifugal compressor used in PEM fuel cells [J]. Chinese Journal of Power Sources, 2016, 40(1): 81-83.

王文杰, 袁寿其, 裴吉, 等. 基于Kriging模型和遗传算法的泵叶轮两工况水力优化设计 [J]. 机械工程学报, 2015, 51(15): 53-58.

WANG Wenjie, YUAN Shouqi, PEI Ji, et al. Two-point hydraulic optimization of pump impeller based on Kriging model and neighborhood cultivation genetic algorithm [J]. Journal of Mechanical Engineering, 2015, 51(15): 53-58.

罗明, 左志涛, 李弘扬, 等. 基于BP人工神经网络的离心压气机叶轮多目标优化设计方法 [J]. 航空动力学报, 2016, 31(10): 2424-2431.

LUO Ming, ZUO Zhitao, LI Hongyang, et al. Multi-objective optimization design of centrifugal compressor impeller based on BP artificial neural work [J]. Journal of Aerospace Power, 2016, 31(10): 2424-2431.

孙晓东, 韩万金. 压气机叶片多工况气动优化设计研究 [J]. 汽轮机技术, 2010, 52(1): 24-26.

SUN Xiaodong, HAN Wanjin. The study of multiple loading conditions optimization design of the blade of transonic compressor [J]. Turbine Technology, 2010, 52(1): 24-26.

刘小民, 张文斌. 采用遗传算法的离心叶轮多目标自动优化设计 [J]. 西安交通大学学报, 2010, 44(1): 31-35.

LIU Xiaomin, ZHANG Wenbin. Multi-objective automatic optimization design of centrifugal impeller based on genetic algorithm [J]. Journal of Xi'an Jiaotong University, 2010, 44(1): 31-35.

WANG X F, XI G, WANG Z H. Aerodynamic optimization design of centrifugal compressor's impeller with Kriging model [J]. Proceedings of the Institution of Mechanical Engineers: Part A Journal of Power and Energy, 2006, 220(6): 589-597.

HA K K, KANG S H. An optimization method for centrifugal compressor design using the surrogate management framework [C]∥Proceedings of the ASME-JSME-KSME 2011 Joint Fluids Engineering Conference. New York, USA: ASME, 2011: 1-6.

GUO Shuai, DUAN Fei, TANG Hui, et al. Multi-objective optimization for centrifugal compressor of mini turbojet engine [J]. Aerospace Science and Technology, 2014, 39(1): 414-425.

KHALFALLAH S, GHENAIET A, BENINI E, et al. Surrogate-based shape optimization of stall margin and efficiency of a centrifugal compressor [J]. Journal of Propulsion and Power, 2015, 31(6): 1-14.

WAN Y, GUAN J, XU S. Improved empirical parameters design method for centrifugal compressor in PEM fuel cell vehicle application [J]. International Journal of Hydrogen Energy, 2017, 42(8): 5590-5605.

万玉, 许思传, 张良. 燃料电池车用离心叶轮型线参数化及多工况优化 [J]. 同济大学学报, 2017, 45(1): 98-108.

WAN Yu, XU Sichuan, ZHANG Liang. Multi-operating condition optimal design of centrifugal impeller for fuel cell vehicle application based on parameterization of impeller profile [J]. Journal of Tongji University, 2017, 45(1): 98-108.

MONTGOMERY D C. Design and analysis of experiments [M]. 9th ed. Berlin, Germany: Wiley, 2017.

YAMADA K, KAMI H, TSUKUMO J, et al. Handwritten numeral recognition by multilayered neural network with improved learning algorithm [C]∥International 1989 Joint Conference on Neural Networks. Piscataway, NJ, USA: IEEE, 1989: 259-266.

SMOLA A J, SCHÖLKOPF B. A tutorial on support vector regression [J]. Statistics and Computing, 2004, 14(3): 199-222.

韩忠华. Kriging模型及代理优化算法研究进展 [J]. 航空学报, 2016, 37(11): 3197-3225.

HAN Zhonghua. Kriging surrogate model and its application to design optimization: a review of recent progress [J]. Acta aeronautica et Astronautica Sinica, 2016, 37(11): 3197-3225.

BIANCHINI M, FRASCONI P. Learning without local minima in radial basis function networks [J]. IEEE Trans on Neural Networks, 1995, 6(3): 749-756.

DEB K. Multi-objective optimization using evolutionary algorithms [M]. Berlin, Germany: Wiley, 2002.

MOSTAGHIM S, TRAUTMANN H, MERSMANN O. Preference-based multi-objective particle swarm optimization using desirabilities [C]∥11th International Conference on Parallel Problem Solving from Nature. Berlin, Germany: Springer-Verlag, 2010: 101-110.

LI H, SILVA D L. Evolutionary multi-objective simulated annealing with adaptive and competitive search direction [C]∥IEEE Congress on Evolutionary Computation. Piscataway, NJ, USA: IEEE, 2008: 3311-3318.

池元成, 蔡国标. 基于蚁群算法的多目标优化 [J]. 计算机工程, 2009, 35(15): 168-169.

CHI Yuancheng, CAI Guobiao. Multi-objective optimization based on ant colony algorithm [J]. Computer Engineering, 2009, 35(15): 168-169.

肖军, 赵远扬, 王乐. 湍流方程扩散项离散对某径向叶轮流场计算的影响 [J]. 航空动力学报, 2014, 29(1): 153-160.

XIAO Jun, ZHAO Yuanyang, WANG Le. Influence of discretization of turbulence equation diffusion terms on flow field computation of a radial impeller [J]. Journal of Aerospace Power, 2014, 29(1): 153-160.

肖军, 赵远扬, 王乐. 离心叶轮流场对进口压力脉冲的响应分析 [J]. 推进技术, 2013, 34(11): 1482-1492.

XIAO Jun, ZHAO Yuanyang, WANG Le. Analysis of flow response to centrifugal intake pressure pulse in an impeller [J]. Journal of Propulsion Technology, 2013, 34(11): 1482-1492.

MCKAY M D, BECKMAN R J, CONOVER W J. A comparison of three methods for selecting values of input variables in the analysis of output from a computer code [J]. Technometrics, 1979, 21(2): 239-245.

SEYEDALI M, SEYED M M, ANDREW L. Grey wolf optimizer [J]. Advances in Engineering Software, 2014, 69: 46-61.

SEYEDALI M, SHAHRZAD S, SEYED M M, et al. Multi-objective grey wolf optimizer: a novel algorithm for multi-criterion optimization [J]. Expert Systems with Applications, 2016, 47: 106-119.

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

燃料电池离心压缩机叶轮构型的参数优化及性能分析

碱掺杂阴离子交换膜在碱性电解槽和燃料电池中的应用与挑战

采用二维纳米材料构筑的燃料电池膜电极离子传输通路研究进展

隧道内燃料电池汽车氢气泄漏扩散特性及影响因素

面向高海拔空冷发电机防晕性能演化规律的电热耦合研究