传热学与电学问题的迁移类比研究:(2)工程实践

李元; 王晨; 张冠军

doi:10.7652/xjtuxb202109001

您当前的位置：

首页 >

文章列表页 >

传热学与电学问题的迁移类比研究:(2)工程实践

更新时间：2025-07-09

- 传热学与电学问题的迁移类比研究:(2)工程实践
- Analogical Transfer between Heat Transfer and Electrology: (2)Engineering Practices
- 西安交通大学学报 2021年55卷第9期页码：1-8
- 作者机构：
  
  1. 西安交通大学电气工程学院,西安,710049
  2. 西安交通大学电力设备电气绝缘国家重点实验室,西安,710049
- 作者简介：
- 基金信息：
- DOI：10.7652/xjtuxb202109001
  中图分类号： TM835
- 网络首发：2021-09-10，
  
  纸质出版：2021
- 稿件说明：
移动端阅览
李元, 王晨, 张冠军. 传热学与电学问题的迁移类比研究:(2)工程实践[J]. 西安交通大学学报, 2021,55(9):1-8.

Analogical Transfer between Heat Transfer and Electrology: (2)Engineering Practices[J]. 2021, 55(9): 1-8.
李元, 王晨, 张冠军. 传热学与电学问题的迁移类比研究:(2)工程实践[J]. 西安交通大学学报, 2021,55(9):1-8. DOI： 10.7652/xjtuxb202109001.

Analogical Transfer between Heat Transfer and Electrology: (2)Engineering Practices[J]. 2021, 55(9): 1-8. DOI： 10.7652/xjtuxb202109001.

摘要

为验证传热学与电学迁移类比理论研究成果的可行性与工程实践价值

给出了两个利用热电类比思想解决电气工程领域实际问题的典型应用案例。针对特殊区域电缆载流量合理核算的难题

基于热电类比分析思路构建电缆径向热路

将电缆结构的各层绝缘材料热阻与各层损耗进行归算

建立了穿过不利散热区电缆的分布式参数热路模型

给出了求解电缆温度场与载流量的思路

弥补了当前国际电工委员会(IEC)标准推荐计算方法的不足; 针对变压器热点温度预测方法不能同时满足实时性与准确性的问题

结合变压器传热过程分析与热电类比理论构建了变压器的集中式参数热路模型

将基尔霍夫电流定律类比应用于热路模型

提出了热点温度快速预测方法。实例分析发现

所提模型相较于IEC推荐方法具有更高的预测精度。热电类比方法能有效地解决电气工程领域的实际应用问题

迁移类比学习应可推动不同学科交叉的创新与发展。

Abstract

To verify the feasibility and engineering practice value of the transfer analogy theory between heat transfer and electrology

this paper presents two typical applications addressing practical problems in the field of electrical engineering. Firstly

in view of lack of calculating method for the current carrying capacity of cable lying through unfavorable heat dissipation regions

we establish the radial thermal circuit of cable with the aid of thermal-electrical analogy analysis. The thermal resistance of insulating material and the loss in each layer of cable structure are equivalently evaluated

and further

the thermal circuit model with distributed parameters is constructed. The thought of solving the cable temperature distribution and carrying capacity is given

which compensates the insufficiency of the current calculation method recommended by IEC standard. Secondly

for the limitations of the prediction methods of hot-spot temperature in transformer

we develop the thermal circuit model with centralized parameters by incorporating the heat transfer process of transformer and the thermal-electrical analogy. Applying Kirchhoff current law to the thermal circuit model

a faster prediction method for calculating the hot-spot temperature is proposed. It is verified that the model has higher prediction accuracy than the method recommended by IEC standard. The results indicate that the thermal-electric analogy can solve engineering problems more practically and the transfer analogy can promote innovation and development of many interdisciplinary researches.

关键词

Keywords

references

李元, 王晨, 张冠军. 传热学与电学问题的迁移类比研究:(1)理论基础 [J]. 西安交通大学学报, 2021, 55(8): 78-84.

LI Yuan, WANG Chen, ZHANG Guanjun. Analogical transfer between heat transfer and electrology:(1)theoretical fundamentals [J]. Journal of Xi'an Jiaotong University, 2021, 55(8): 78-84.

李刚, 张博, 赵文清, 等. 电力设备状态评估中的数据科学问题: 挑战与展望 [J]. 电力系统自动化, 2018, 42(21): 10-20, 177.

LI Gang, ZHANG Bo, ZHAO Wenqing, et al. Data science issues in state evaluation of power equipment: challenges and prospects [J]. Automation of Electric Power Systems, 2018, 42(21): 10-20, 177.

黎坚. 浅谈中等城市架空线路改为地下电缆的必要性与可行性 [J]. 中国高新技术企业, 2012(29): 158-160.

高茜. 城市配电网建设改造中电缆线路的应用探讨 [J]. 通信电源技术, 2019, 36(7): 266-267.

GAO Qian. Discussion on the application of cable lines in the construction and reconstruction of urban distribution network [J]. Telecom Power Technology, 2019, 36(7): 266-267.

张雪峰. 地下电缆的敷设形式与散热条件分析 [J]. 科技信息, 2011(13): 752, 827.

IEEE. Calculation of the current rating-current rating equations(100% load factor)and calculation of losses: C60287-1 [S]. Piscataway, NJ,USA: IEEE, 2001: 714-716.

IEEE. Calculation of the current rating-thermal resistance: C60287-2 [S]. Piscataway, NJ,USA: IEEE, 2001: 751-760.

郑雁翎. 穿过不利散热区域排管电力电缆的三维热路模型分析计算 [J]. 电气自动化, 2016, 38(2): 52-55.

ZHENG Yanling. Analysis and calculation of a three-dimensional thermal circuit model for power cables in pipes crossing unfavorable heat dissipation regions [J]. Electrical Automation, 2016, 38(2): 52-55.

郑雁翎, 王宁, 李洪杰, 等. 电力电缆载流量计算的研究与发展 [J]. 电线电缆, 2010(2): 4-9.

ZHENG Yanling, WANG Ning, LI Hongjie, et al. Study and progress of the ampacity computation of power cables [J]. Electric Wire Cable, 2010(2): 4-9.

ANDERS G, BRAUN J M, VAINBERG M, et al. Rating of cables in a nonuniform thermal environment [C]∥Proceedings of the 1999 IEEE Transmission and Distribution Conference. Piscataway, NJ, USA: IEEE, 1999: 83-88.

ANDERS G, BRAKELMANN H. Cable crossings-derating considerations: I Derivation of derating equations [J]. IEEE Transactions on Power Delivery, 1999, 14(3): 709-714.

陈如意, 江军, 陈珉, 等. 基于最大信息系数的变压器过热故障特征选择 [J]. 电力工程技术, 2020, 39(2): 140-145.

CHEN Ruyi, JIANG Jun, CHEN Min, et al. Feature selection of dissolved gases in power transformer based on maximal information coefficient [J]. Electric Power Engineering Technology, 2020, 39(2): 140-145.

HILL J, WANG Zhongdong, LIU Qiang, et al. Analysing the power transformer temperature limitation for avoidance of bubble formation [J]. High Voltage, 2019, 4(3): 210-216.

李玉杰, 李洪涛, 宋思齐, 等. 基于红外的GIS内部导体温度检测技术研究 [J]. 电力工程技术, 2019, 38(2): 142-146.

LI Yujie, LI Hongtao, SONG Siqi, et al. Temperature detection of internal conductor in GIS based on infrared thermal imaging [J]. Electric Power Engineering Technology, 2019, 38(2): 142-146.

ARABUL A Y, SENOL I. Development of a hot-spot temperature calculation method for the loss of life estimation of an ONAN distribution transformer [J]. Electrical Engineering, 2018, 100(3): 1651-1659.

LI Xiaosong, CHEN Qiaofu, HU Gui, et al. Numerical analysis on magnetic field of HTS transformer with different geometry [J]. IEEE Transactions on Magnetics, 2006, 42(4): 1343-1346.

吕茵, 王慧泉, 周文青, 等. 基于有限元法的换流阀水路系统电场分析 [J]. 电力工程技术, 2019, 38(4): 145-151.

LÜ Yin, WANG Huiquan, ZHOU Wenqing, et al. Electric field of valve cooling system in thyristor valve based on finite element method [J]. Electric Power Engineering Technology, 2019, 38(4): 145-151.

邓建钢, 王立新, 聂德鑫, 等. 内置光纤光栅油浸式变压器的研制 [J]. 中国电机工程学报, 2013, 33(24): 160-167, 23.

DENG Jiangang, WANG Lixin, NIE Dexin, et al. Development of oil-immersed transformers with built-in fiber Bragg grating sensors [J]. Proceedings of the CSEE, 2013, 33(24): 160-167, 23.

IEEE. IEEE guide for loading mineral-oil-immersed transformers: C57.91-1995 [S]. Piscataway, NJ,USA: IEEE, 1995: 25-30.

苏小平, 陈伟根, 胡启元, 等. 基于解析-数值技术的变压器绕组温度分布计算 [J]. 高电压技术, 2014, 40(10): 3164-3170.

SU Xiaoping, CHEN Weigen, HU Qiyuan, et al. Calculation for transformer winding temperature distribution by numerical analytical technology [J]. High Voltage Engineering, 2014, 40(10): 3164-3170.

陈伟根, 滕黎, 刘军, 等. 基于遗传优化支持向量机的变压器绕组热点温度预测模型 [J]. 电工技术学报, 2014, 29(1): 44-51.

CHEN Weigen, TENG Li, LIU Jun, et al. Transformer winding hot-spot temperature prediction model of support vector machine optimized by genetic algorithm [J]. Transactions of China Electrotechnical Society, 2014, 29(1): 44-51.

刘文泽, 张俊, 邓焱. 基于深度置信网络和多维信息融合的变压器故障诊断方法 [J]. 电力工程技术, 2019, 38(6): 16-23.

LIU Wenze, ZHANG Jun, DENG Yan. Transformer fault diagnosis method based on deep learning and multi-dimensional information fusion [J]. Electric Power Engineering Technology, 2019, 38(6): 16-23.

李元, 刘宁, 梁钰, 等. 基于温升特性的油浸式变压器负荷能力评估模型 [J]. 中国电机工程学报, 2018, 38(22): 6737-6746.

LI Yuan, LIU Ning, LIANG Yu, et al. A model of load capacity assessment for oil-immersed transformer by using temperature rise characteristics [J]. Proceedings of the CSEE, 2018, 38(22): 6737-6746.

GUO Zengyuan, ZHU Hongye, LIANG Xingang. Entransy: a physical quantity describing heat transfer ability [J]. International Journal of Heat and Mass Transfer, 2007, 50(13/14): 2545-2556.

全国变压器标准化技术委员会. 电力变压器: 第7部分油浸式电力变压器负载导则: GB/T 1094.7—2008 [S]. 北京: 中国标准出版社, 2009: 10-11.

杨博淙, 王伯雄, 秦垚, 等. 热气致动双稳态微型阀响应时间的仿真及实验 [J]. 清华大学学报(自然科学版), 2011, 51(6): 840-845.

YANG Bocong, WANG Boxiong, QIN Yao, et al. Response time of a thermopneumatically actuated bistable microvalve [J]. Journal of Tsinghua University(Science and Technology), 2011, 51(6): 840-845.

彭昌海. 用热电类比方法计算多层墙体的温度响应 [J]. 暖通空调, 2005, 35(11): 13-15, 87.

刘海霞, 蒋鹞飞, 宋凝芳, 等. 基于热电类比法的光纤陀螺环模块热分析 [J]. 北京航空航天大学学报, 2014, 40(5): 596-601.

LIU Haixia, JIANG Yaofei, SONG Ningfang, et al. FOG ring modules thermal analysis based on thermoelectric analogy [J]. Journal of Beijing University of Aeronautics and Astronautics, 2014, 40(5): 596-601.

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

面向变压器叠片铁心涡流损耗评估的快速高精度多尺度计算方法

基于励磁电感参数识别的变压器励磁涌流判别方法

变压器绕组对局部放电电磁波传播特性的影响

级联H桥型多电平逆变器中变压器偏磁抑制控制方法研究

突发短路条件下变压器绕组振动特性的仿真研究