掘进机姿态调整模型辨识方法与精准控制

张敏骏; 吉晓冬; 李旭; 瞿圆媛; 吴淼

doi:10.7652/xjtuxb202106002

您当前的位置：

首页 >

文章列表页 >

掘进机姿态调整模型辨识方法与精准控制

更新时间：2025-07-09

- 掘进机姿态调整模型辨识方法与精准控制
- Method of Model Identification and Precise Control for Tunnel Boring Machine Body Posture Adjustment
- 西安交通大学学报 2021年55卷第6期页码：9-17
- 作者机构：
  
  清华大学机械工程系,北京,100084
- 作者简介：
- 基金信息：
  
  : 2020-10-27。作者简介: 张敏骏(1992—),男,博士后。基金项目: 国家自然科学基金资助项目(51874308);国家重点基础研究发展计划资助项目(2014CB046306);天地科技股份有限公司科技创新创业资金资助项目(2020-TD-MS006)
- DOI：10.7652/xjtuxb202106002
  中图分类号： TH86
- 网络首发：2021-06-10，
  
  纸质出版：2021
- 稿件说明：
移动端阅览
张敏骏, 吉晓冬, 李旭, 等. 掘进机姿态调整模型辨识方法与精准控制[J]. 西安交通大学学报, 2021,55(6):9-17.

Method of Model Identification and Precise Control for Tunnel Boring Machine Body Posture Adjustment[J]. 2021, 55(6): 9-17.
张敏骏, 吉晓冬, 李旭, 等. 掘进机姿态调整模型辨识方法与精准控制[J]. 西安交通大学学报, 2021,55(6):9-17. DOI： 10.7652/xjtuxb202106002.

Method of Model Identification and Precise Control for Tunnel Boring Machine Body Posture Adjustment[J]. 2021, 55(6): 9-17. DOI： 10.7652/xjtuxb202106002.

摘要

针对因掘进机姿态控制精度较差导致巷道掘进轨迹偏离进而影响煤矿生产安全与效率的问题

提出了一种基于粒子群算法的掘进机姿态调整控制模型辨识方法及模糊神经网络PID姿态控制方法。首先分析了掘进机姿态角误差与巷道断面之间关系

基于姿态运动学与液压模型确定了姿态控制系统传递函数结构

通过粒子群算法的寻优特性与输入输出信号的响应对传递函数参数进行拟合进而实现辨识。仿真结果表明

与采用最小二乘和遗传算法的辨识方法相比

所提采用粒子群算法的模型辨识方法的辨识精度分别提高了96.75%和95.15%。此外

利用模糊控制的强非线性适应性与神经网络的自学习能力设计了姿态调整的PID控制系统。搭建了EBZ-55型掘进机俯仰角控制试验平台

并在不同的试验工况下进行了多组俯仰角控制试验。试验结果表明

基于粒子群模型辨识方法的模糊神经网络PID控制方法比模糊PID控制方法最多可降低57.1%的超调误差以及53.5%的响应时间

并能稳定实现1°以内的姿态角控制。该方法可为掘进机及大型液压设备的姿态控制提供有效的技术支撑与参考。

Abstract

Aiming at the derivation of the tunnel excavation track and the coal production inefficiency and safety problem caused by poor posture control accuracy of tunnel boring machine(TBM)

a model identification method based on the particle swarm optimization(PSO)and a fuzzy neural network control method of attitude control are proposed. Firstly

the relation between the posture error and the tunnel section is analyzed

and the structure of the control system transfer function is determined according to the kinematic and hydraulic system model. Through the PSO searching character and the response of the input and output signals

the transfer function parameters could be fitted. Simulation results show that the identification accuracy based on PSO is 96.75% and 95.15% higher

respectively

than that based on least square or genetic algorithm identification method. Making use of the fuzzy logic control' strong nonlinearity adaptability and the neural network' self-learning ability

a posture PID control algorithm is proposed

and a EBZ-55 tunnel boring machine attitude control experiment system is designed and established. Experiment shows that compared with the fuzzy PID

the proposed fuzzy neural network PID control system could mostly reduce 57.1% overshoot error and 53.5% response time in different conditions

and the posture of the tunneling boring machine could be controlled in 1° stably.

关键词

Keywords

references

杨健健, 张强, 王超, 等. 煤矿掘进机的机器人化研究现状与发展 [J]. 煤炭学报, 2020, 45(8): 2995-3005.

YANG Jianjian, ZHANG Qiang, WANG Chao, et al. Status and development of robotization research on roadheader for coal mines [J]. Journal of China Coal Society, 2020, 45(8): 2995-3005.

臧富雨, 刘丹, 吕馥言, 等. 不同倾角巷道下掘进机的防滑控制研究 [J]. 煤炭科学技术, 2019, 47(6): 30-36.

ZANG Fuyu, LIU Dan, LYU Fuyan, et al. Study on anti-skid control of roadheaders on roadways floors with varied dip angles [J]. Coal Science and Technology, 2019, 47(6): 30-36.

耿麒, 魏正英, 孟昊, 等. TBM的平面刀盘与两级刀盘的力学性能对比分析 [J]. 西安交通大学学报, 2015, 49(3): 121-128.

GENG Qi, WEI Zhengying, MENG Hao et al. Comparison of mechanical performances between the two-stage cutterhead and the flat-face cutterhead for rock tunnel boring machine [J]. Journal of Xi'an Jiaotong University, 2015, 49(3): 121-128.

张敏骏, 蔡岫航, 吕馥言, 等. 受限巷道空间区域栅格化掘进机自主纠偏研究 [J]. 仪器仪表学报, 2018, 39(3): 62-70.

ZHANG Minjun, CAI Xiuhang, LYU Fuyan, et al. Research on roadheader auto rectification in limited roadway space based on regional grid [J]. Chinese Journal of Scientific Instrument, 2018, 39(3): 62-70.

张敏骏. 悬臂式掘进机自主纠偏与位姿控制研究 [D]. 北京: 中国矿业大学(北京), 2019: 22-24.

ZHANG Minjun, TANG Xiushan, JI Xiaodong, et al. Analysis of vibration of roadheader rotary table based on finite element method and data from underground coalmine [J]. Shock and Vibration, 2018, 3: 1-9.

臧富雨, 王凯硕, 吉晓冬, 等. 悬臂式掘进机俯仰角调控系统仿真研究 [J]. 工矿自动化, 2019, 45(5): 62-67.

ZANG Fuyu, WANG Kaishuo, JI Xiaodong, et al. Simulation re-search on pitch angle control system of boom roadheader [J]. Industry and Mine Automation, 2019, 45(5): 62-67.

ZHANG Minjun, LYU Fuyan, FU Shichen, et al. Study on the pitch angle control of a robotized hydraulic drive roadheader using different control methods [J]. Journal of Mechanical Science and Technology, 2018, 32(10): 4893-4901.

张晓光, 杨悦, 孙彦景, 等. 基于多频连续波相位差测距的掘进机位姿识别方法 [J]. 煤炭学报, 2020, 45(6): 2056-2064.

ZHANG Xiaoguang, YANG Yue, SUN Yanjing, et al. Pose recognition method of roadheader based on multifrequency continuous-wave phase-difference ranging [J]. Journal of China Coal Society, 2020, 45(6): 2056-2064.

彭雄斌, 龚国芳, 廖湘平, 等. 微位移控制液压系统建模与模型辨识 [J]. 机械工程学报, 2017, 53(22): 206-212.

PENG Xiongbin, GONG Guofang, LIAO Xiangping, et al. Modeling and model identification of micro-position-control hydraulic system [J]. Journal of Mechanical Engineering, 2017, 53(22): 206-212.

董立红, 赵鹏兵. 液压挖掘机工作装置的区间Ⅱ型模糊控制 [J]. 煤炭学报, 2013, 38(4): 707-714.

DONG Lihong, ZHAO Pengbing. Internal type-II fuzzy control on work device of hydraulic excavator [J]. Journal of China Coal Society, 2013, 38(4): 707-714.

SUN Zhenchuan, ZHANG Bing, LI Geqiang, et al. Parameter identification of shield hydraulic propulsion system based on neural network [J]. Machine Tool Hydraulics, 2019, 47(24): 24-32.

张振, 龚国芳, 吴伟强, 等. 硬岩隧道掘进机推进系统姿态自适应控制 [J]. 浙江大学学报(工学版), 2015, 49(10): 1870-1877.

ZHANG Zhen, GONG Guofang, WU Weiqiang, et al. Adaptive attitude control of thrust system for hard rock tunnel boring machine [J]. Journal of Zhejiang University(Engineering Science), 2015, 49(10): 1870-1877.

吴淼, 贾文浩, 华伟, 等. 基于空间交汇测量技术的悬臂式掘进机位姿自主测量方法 [J]. 煤炭学报, 2015, 40(11): 2596-2602.

WU Miao, JIA Wenhao, HUA Wei, et al. Autonomous measurement of position and attitude of boom-type roadheader based on space intersection measurement [J]. Journal of China Coal Society, 2015, 40(11): 2596-2602.

ZHANG Minjun, LYU Fuyan, LI Chunzhi, et al. The roadheader auto-rectification dynamic analysis and control based on the roadway floor mechanic characteristics [J]. Arabian Journal for Science and Engineering, 2021, 46(3): 2649-2661.

LI Xiaoping, WANG Wenjie, ZHANG Weile, et al. Phase-detection-based range estimation with robust Chinese [J]. IEEE Transactions on Vehicular Technology, 2016, 65(12): 10132-10137.

MELO H, WATADA J. Gaussian-PSO with fuzzy reasoning based on structural learning for training a neural network [J]. Neurocomputing, 2016, 172: 405-412.

HARGRAVE C O, JAMES C A, RALSTON J C. Infrastructure-based localisation of automated coal [J]. International Journal of Coal Science Technology, 2017, 4(3): 252-261.

张敏骏, 臧富雨, 吉晓冬, 等. 掘进机远程监控系统设计与位姿检测精度验证 [J]. 煤炭科学技术, 2018, 46(12): 48-53.

ZHANG Minjun, ZANG Fuyu, JI Xiaodong, et al. Design of remote monitoring system for roadheader and accuracy verification of position and posture detection [J]. Coal Science and Technology, 2018, 46(12): 48-53.

YANG Wenjuan, ZHANG Xuhui, MA Hongwei, et al. Infrared LEDs-based pose estimation with underground camera model for boom-type roadheader in coal mining [J]. IEEE Access, 2019, 7(3): 33698-33712.

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

内变量参数辨识的灰色电价预测模型

采用多目标粒子群算法的模拟电路故障诊断研究

梯级水电站优化调度的模糊自适应粒子群算法

基于随机权重粒子群算法的SCARA机器人动力学参数辨识

多工况下离心压气机叶轮-机匣一体联合设计优化