盛伟, 王利霞, 冯占荣, 等. 弧线齿面齿轮齿面几何设计及径向齿宽特性 [J]. 航空动力学报, 2019, 34(4): 796-803.

SHENG Wei, WANG Lixia, FENG Zhanrong, et al. Geometrical design of tooth surface and characteristics of radial tooth width for face gear with arc tooth [J]. Journal of Aerospace Power, 2019, 34(4): 796-803.

明兴祖, 方曙光, 王红阳. 面齿轮磨削齿面齿形误差修正 [J]. 中国机械工程, 2018, 29(17): 2031-2037.

MING Xingzu, FANG Shuguang, WANG Hongyang. Tooth surface form error correction for face gear grinding [J]. China Mechanical Engineering, 2018, 29(17): 2031-2037.

LITVIN F L, PEREZ I G, FUENTES A, et al. Design, generation and stress analysis of face-gear drive with helical pinion [J]. Computer Methods in Applied Mechanics and Engineering, 2005, 194(36): 3870-3901.

林腾蛟, 冉雄涛. 正交面齿轮传动非线性振动特性分析 [J]. 振动与冲击, 2012, 31(2): 25-31.

LIN Tengjiao, RAN Xiongtao. Nonlinear vibration characteristic analysis of a face-gear drive [J]. Journal of Vibration and Shock, 2012, 31(2): 25-31.

LIU Dawei, GU Dandan, LIU Zhijia. Coupled vibration modeling and dynamic characteristics of noncircular face gear drive system with time-varying instantaneous center excitation [J]. Archive Proceedings of the Institution of Mechanical Engineers: Part C Journal of Mechanical Engineering Science, 2019, 233(14): 4947-4959.

LITVIN F L, WANG J C, BOSSLER R B, et al. Application of face-gear drives in helicopter transmissions [J]. Journal of Mechanical Design, 1994, 116(3): 672-676.

HEATH G F, SLAUGHTER S C, FISHER D J, et al. Helical face gear development under the enhanced rotorcraft drive system program [C]∥Proceedings of the 67th American Helicopter Society International Annual Forum. Alexandria, VA, USA: American Helicopter Society, 2011: 1-20.

FILLER R R, HEATH G F, SLAUGHTER S C, et al. Torque splitting by a concentric face gear transmission [C]∥Proceedings of the 58th American Helicopter Society International Annual Forum. Alexandria, VA, USA: American Helicopter Society, 2002: 1-17.

HANDSCHUH R F, LEWICKI D G, HEATH G F, et al. Experimental evaluation of face gears for aerospace drive system applications [J]. NASA Technical Memorandum, 1996: 107227.

陈广艳, 陈国定, 李永祥, 等. 含有面齿轮的传动系统动态响应特性研究 [J]. 航空动力学报, 2009, 24(10): 239-244.

CHEN Guangyan, CHEN Guoding, LI Yongxiang, et al. Dynamic response analysis of gear drive with face-gears [J]. Journal of Aerospace Power, 2009, 24(10): 239-244.

李晓贞, 朱如鹏, 李政民卿, 等. 齿面摩擦对面齿轮传动系统振动特性的影响分析 [J]. 振动工程学报, 2014, 27(4): 583-588.

LI Xiaozhen, ZHU Rupeng, LI Zhengminqing, et al. Analysis of the influence of tooth friction on the vibration characteristics of face gear transmission system [J]. Journal of Vibration Engineering, 2014, 27(4): 583-588.

彭先龙, 张乐. 面齿轮功率分支传动系统的转矩分配研究 [J]. 机械传动, 2016, 40(11): 117-122.

PENG Xianlong, ZHANG Le. Study on torque distribution of torque split transmission system of face gear [J]. Journal of Mechanical Transmission, 2016, 40(11): 117-122.

赵宁, 王锐锋, 贾清健. 面齿轮分扭传动系统均载研究 [J]. 机械传动, 2013, 37(12): 5-8.

ZHAO Ning, WANG Ruifeng, JIA Qingjian, Study on the load sharing of face gear split torque transmission system [J]. Journal of Mechanical Transmission, 2013, 37(12): 5-8.

CHUN H, FILLER R R, TAN J. Analytical determination of load distribution in a statically indeterminate face gear transmission [C]∥Proceedings of the AHS International 62nd Annual Forum. Alexandria, VA, USA: American Helicopter Society, 2006: 680-686.

HEATH G F, FILLER R R, TAN J. Development of face gear technology for industrial and aerospace power transmission: NASA/CR-2002-211320 [R]. Mesa, AZ, USA: The Boeing Company, 2002: 14-78.

DONG Jianxiong, TANG Jinyuan, HU Zehua. Investigation of assembly, power direction and load sharing in concentric face gear split-torque transmission system [J]. Meccanica, 2019, 54(15): 2485-2506.

ZHAO Ning, LI Wang, HU Tao, et al. Quasistatic load sharing behaviours of concentric torque-split face gear transmission with flexible face gear [J]. Mathematical Problems in Engineering, 2018, 2018: 1-12.

付晨曦. 直升机齿轮分扭传动主减速器动态特性与均载特性研究 [D]. 西安: 西北工业大学, 2016: 64-65.

莫帅, 岳宗享, 冯志友, 等. 面齿轮分汇流系统动力学均载特性研究 [J]. 华中科技大学学报(自然科学版), 2020, 48(2): 23-28.

MO Shuai, YUE Zhongxiang, FENG Ziyou, et al. Analytical investigation on load-sharing characteristics for multi-power face gear split flow system [J]. Journal of Huazhong University of Science and Technology(Natural Science Edition), 2020, 48(2): 23-28.

蒋进科,刘钊,刘红梅.齿面磨损最小直齿锥齿轮Ease-off修形设计与分析.2020,54(6):99-106.[doi:10.7652/xjtuxb 202006013]

王成龙,周建星,孙文磊,等.行星齿轮传动柔性齿圈齿根动应力计算及光纤光栅检测方法.2020,54(6):122-132.[doi:10.7652/xjtuxb202006016]

王靖岳,李建刚,王浩天.采用改进多点最优最小熵反褶积的齿轮箱复合故障特征提取.2020,54(5):70-77.[doi:10.7652/xjtuxb202005010]

姚斌,卢杰,蔡志钦,等.螺杆转子成形磨削用砂轮廓形的包络-像素设计方法.2020,54(2):16-23.[doi:10.7652/xjtuxb 202002003]

陈保家,黄伟,李立军,等.最大重叠离散小波包变换边际谱特征在齿轮故障诊断中的应用.2020,54(2):35-42.[doi:10.7652/xjtuxb202002005]

刘振,孔德同,赵明,等.裂纹损伤行星轮系的编码器信号响应特性.2020,54(2):43-50.[doi:10.7652/xjtuxb202002006]

吴静然,丁恩杰,崔冉,等.采用多尺度注意力机制的旋转机械故障诊断方法.2020,54(2):51-58.[doi:10.7652/xjtuxb 202002007]

张西宁,周融通,郭清林,等.局部倒频谱编辑方法及其在齿轮箱微弱轴承故障特征提取中的应用.2019,53(12):1-9.[doi:10.7652/xjtuxb201912001]

张宁,张英杰,李阳帆.考虑齿轮形变的谐波减速器齿廓优化方法.2019,53(12):31-37.[doi:10.7652/xjtuxb201912005]

姜歌东,王爽,梅雪松,等.谐波齿轮传动双圆弧齿形双向共轭设计方法.2019,53(8):8-14.[doi:10.7652/xjtuxb201908 002]

胡升阳,方宗德.行星传动均载及动载系数定义改进与分析.2019,53(8):40-46.[doi:10.7652/xjtuxb201908006]

何小高,张庆,贾林山,等.变速重载设备齿轮箱轴承故障的改进阶次包络分析方法.2019,53(8):98-106.[doi:10.7652/xjtuxb201908013]

彭山东,丁撼,唐进元.改进的6σ设计的螺旋锥齿轮加工参数反调修正方法.2019,53(6):35-43.[doi:10.7652/xjtuxb 201906006]

蒋进科,方宗德,刘钊.Ease-off拓扑修形准双曲面齿轮齿面多目标优化设计方法.2019,53(6):44-53.[doi:10.7652/xjtuxb201906007]

徐兴,徐新铮,王峰,等.新型双电机行星耦合PHEV多目标补偿能量优化策略研究.2019,53(3):125-134.[doi:10.7652/xjtuxb201903018]

王凯,付敏,王珏翎.滚子包络端面啮合蜗杆传动的啮合性能分析.2019,53(3):135-142.[doi:10.7652/xjtuxb201903019]

邹创,陶涛,姜歌东,等.考虑力学特性的谐波齿轮啮合参数优化方法.2019,53(2):16-23.[doi:10.7652/xjtuxb201902 003]

张西金,方宗德,郭芳,等.混合弹流润滑修形斜齿轮齿面摩擦功率损耗.2019,53(1):11-17.[doi:10.7652/xjtuxb201901 002]

付学中,方宗德,崔艳梅,等.面齿轮传动全齿面闪温分布与抗胶合修形优化.2018,52(11):120-126.[doi:10.7652/xjtuxb201811018]

刘超,方宗德.复杂机械装配体的响应面优化设计方法.2018,52(9):28-36.[doi:10.7652/xjtuxb201809004]