轴向轮缘密封导流段几何结构对涡轮级气动冷却特性影响的数值研究

高庆 1; 屈杰 1; 马汀山 1; 居文平 1; 2; 李军 3; 惠涛 4

doi:10.7652/xjtuxb201909004

您当前的位置：

首页 >

文章列表页 >

轴向轮缘密封导流段几何结构对涡轮级气动冷却特性影响的数值研究

更新时间：2025-07-09

- 轴向轮缘密封导流段几何结构对涡轮级气动冷却特性影响的数值研究
- Numerical Investigation on the Effects of Rim Seal Diversion Configurations on Aerodynamic and Film Cooling Performances of Turbine Stage
- 西安交通大学学报 2019年53卷第9期页码：26-33
- 作者机构：
  
  1. 西安热工研究院有限公司,西安,710054
  2. 西热节能技术有限公司,西安,710054
- 作者简介：
- 基金信息：
  
  : 2019-03-21。作者简介: 高庆(1988—),男,博士,工程师;李军(通信作者),男,教授。基金项目: 国家自然科学基金资助项目(51776151)
- DOI：10.7652/xjtuxb201909004
  中图分类号： TK472
- 网络首发：2019-09-10，
  
  纸质出版：2019
- 稿件说明：
移动端阅览
高庆 1, 屈杰 1, 马汀山 1, 等. 轴向轮缘密封导流段几何结构对涡轮级气动冷却特性影响的数值研究[J]. 西安交通大学学报, 2019,53(9):26-33.

Numerical Investigation on the Effects of Rim Seal Diversion Configurations on Aerodynamic and Film Cooling Performances of Turbine Stage[J]. 2019, 53(9): 26-33.
高庆 1, 屈杰 1, 马汀山 1, 等. 轴向轮缘密封导流段几何结构对涡轮级气动冷却特性影响的数值研究[J]. 西安交通大学学报, 2019,53(9):26-33. DOI： 10.7652/xjtuxb201909004.

Numerical Investigation on the Effects of Rim Seal Diversion Configurations on Aerodynamic and Film Cooling Performances of Turbine Stage[J]. 2019, 53(9): 26-33. DOI： 10.7652/xjtuxb201909004.

摘要

以轴向轮缘密封为研究对象

在传统直缝密封间隙结构的基础上

通过改变轴向外齿间隙区域的几何型线

设计了双曲线、椭圆及圆型密封导流段结构

数值求解了三维RANS方程组和SST湍流模型

并且系统深入研究了这4种不同导流段几何结构下轮缘密封射流对涡轮级的气动性能

以及对下游动叶端壁冷却性能的影响规律。研究结果表明:所设计圆型、椭圆型以及双曲型导流段结构均可提高涡轮级整体气动性能; 圆型密封导流段结构具有最佳的气动性能以及端壁气膜冷却效果。相比于直缝型导流段结构

采用圆型导流段结构在相同的冷气流量下

涡轮级效率可提高约0.23%; 在动叶前缘轮缘密封射流所覆盖的冷却区域

采用圆型导流段结构时冷却效率可提高约20%。

Abstract

In this investigation

the effects of rim seal diversion configurations on the aerodynamic and film cooling performances of turbine stage were analy-ed with axial rim seal as the research object.Firstly

hyperbola

ellipse and circle rim seal diversion configurations were designed based on the conventional axial rim seal configuration.Three-dimensional Reynolds-averaged Navier-Stokes(RANS)equations

coupled with a fully-developed shear stress transport(SST)turbulent model from Ansys-CFX

were utili-ed to evaluate the influence of rim seal diversion configurations on the interaction of the hub leakage flow with the mainstream in the turbine stage.The results show that all the three diversion configurations of hyperbola

ellipse and circle rim seals could improve the turbine efficiency compared with axial seal.The circle rim seal provides the best aerodynamic and film cooling performances of turbine stage.Compared with axial seal

the circle rim seal could improve the turbine efficiency

关键词

Keywords

references

MCLEAN C, CAMCI C, GLEZER B.Mainstream aerodynamic effects due to wheelspace coolant injection in a high-pressure turbine stage: part I Aerodynamic measurements in the stationary frame [J].ASME Journal of Turbomachinery, 2001, 123(4): 687-696.

MCLEAN C, CAMCI C, GLEZER B.Mainstream aerodynamic effects due to wheelspace coolant injection in a high-pressure turbine stage: part II Aerodynamic measurements in the rotational frame [J].ASME Journal of Turbomachinery, 2001, 123(4): 697-703.

BLANCO E, HODSON H P, VAZQUEZ R.Effect of the leakage flows and the upstream platform geometry on the endwall flows of a turbine cascade [J].ASME Journal of Turbomachinery, 2009, 131(4): 42-49.

SCHULER P, KURZ W, DULLENKOPF K, et al.The influence of different rim seal geometries on hot-gas ingestion and total pressure loss in a low-pressure turbine [C]∥ASME Turbo Expo 2010: Power for Land, Sea, and Air.New York, USA: ASME, 2010: 1123-1134.

POPOVIAC'U I, HODSON H P.The effects of a parametric variation of the rim seal geometry on the interaction between hub leakage and mainstream flows in HP turbines [C]∥ASME Turbo Expo 2012: Turbine Technical Conference and Exposition.New York, USA: ASME, 2012: 1823-1833.

MARINI R, GIRGIS S.The effect of blade leading edge platform shape on upstream disk cavity to mainstream flow interaction of a high-pressure turbine stage [C]∥ASME Turbo Expo 2007: Power for Land, Sea, and Air.New York, USA: ASME, 2007: 587-596.

SCHUEPBACH P, ABHARI R S, ROSE M G, et al.Influence of rim seal purge flow on the performance of an endwall-profiled axial turbine [J].ASME Journal of Turbomachinery, 2011, 133(14): 1-10.

BLOT D M, ROY A, EKKAD S V, et al.Effect of upstream purge slot on a transonic turbine blade passage: part 1 aerodynamic performance [C]∥ASME Turbo Expo 2013: Turbine Technical Conference and Exposition.New York, USA: ASME, 2013: V03BT 13A023.

JIA W, LIU H X.Numerical investigation of the interaction between upstream cavity purge flow and main flow in low aspect ratio turbine cascade [J].Chinese Journal of Aeronautics, 2013, 26(1): 85-93.

高庆, 李军.间隙结构对轮缘密封封严性能及透平级气动性能影响的数值研究 [J].西安交通大学学报, 2015, 49(3): 25-31.

GAO Qing, LI Jun.Numerical investigations for effects of turbine rim seal configurations on sealing effectiveness and aerodynamic performance of turbine stage [J].Journal of Xi'an Jiaotong University, 2015, 49(3): 25-31.

程舒娴, 李志刚, 李军.端壁造型对轮缘密封流场和封严效率的影响 [J].西安交通大学学报, 2019, 53(3): 20-27.

CHENG Shuxian, LI Zhigang, LI Jun.Effects of endwall profiling on the unsteady flow field and sealing efficiency of rim seal [J].Journal of Xi'an Jiaotong University, 2019, 53(3): 20-27.

贾惟.轮毂封严对涡轮端区流动影响的数值研究 [J].热能动力工程, 2018, 33(8): 20-29.

JIA Wei.Numerical investigation of influence of rim seal purge flow on turbine endwall flows [J].Journal of Engineering for Thermal Energy and Power, 2018, 33(8): 20-29.

杨帆, 周莉, 王占学.轮缘封严气流与转子干涉损失机理的数值研究 [J].推进技术, 2018, 39(11): 2481-2489.

YANG Fan, ZHOU Li, WANG Zhanxue.Numerical investigation for interaction and loss mechanisms between rim seal flow and rotor [J].Journal of Propulsion Technology, 2018, 39(11): 2481-2489.

POPOVIC I, HODSON H P.Aerothermal impact of the interaction between hub leakage and mainstream flows in highly-loaded high pressure turbine blades [J].ASME Journal of Turbomachinery, 2013, 135(6): 061014.

BARIGOZZI G, FRANCHINI G, PERDICHIZZI A, et al.Influence of purge flow injection angle on the aerothermal performance of a rotor blade cascade [J].ASME Journal of Turbomachinery, 2014, 136(4): 041012.

安玉戈, 刘火星, 邹正平.轮毂封严冷气对涡轮性能和热负荷的影响 [J].航空动力学报, 2016, 31(10): 2415-2423.

AN Yuge, LIU Huoxing, ZOU Zhengping.Effect of rim seal purge flow on performance and thermal loading of turbine [J].Journal of Aerospace Power, 2016, 31(10): 2415-2423.

SUN H, LI J, SONG L M, et al.Non-axisymmetric turbine endwall aerodynamic optimization design: part I Turbine cascade design and experimental validations [C]∥ASME Turbo Expo 2014: Turbine Technical Conference and Exposition.New York, USA: ASME, 2014: V02BT39A006.

WALRAEVENS R E, GALLUS H E, JUNG A R, et al.Experimental and computational study of the unsteady flow in a 1.5 stage axial turbine with emphasis on the secondary flow in the second stator [C]∥ASME Turbo Expo 1998: International Gas Turbine and Aeroengine Congress and Exhibition.New York, USA: ASME, 1998: V001T01A069.

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

仿海鸥翼型动静态气动特性的数值模拟

端壁造型对轮缘密封流场和封严效率的影响

1.5级涡轮轮缘密封燃气入侵特性的数值研究

间隙结构对轮缘密封封严性能及透平级气动性能影响的数值研究

补汽对透平级气动性能和静叶汽封转子动力特性影响的数值模拟