含辅助槽轴向永磁电机的电磁力波分析及抑制

刘洋; 左曙光; 邓文哲

doi:10.7652/xjtuxb201901010

您当前的位置：

首页 >

文章列表页 >

含辅助槽轴向永磁电机的电磁力波分析及抑制

更新时间：2025-07-09

- 含辅助槽轴向永磁电机的电磁力波分析及抑制
- Suppression of Electromagnetic Force Wave of Axial Permanent Magnet Motor with Auxiliary Slot
- 西安交通大学学报 2019年53卷第1期页码：77-85
- 作者机构：
  
  同济大学新能源汽车工程中心,上海,201804
- 作者简介：
- 基金信息：
  
  : 2018-05-16。作者简介: 刘洋(1992—),男,硕士生;左曙光(通信作者),男,教授。基金项目: 国家自然科学基金资助项目(51375343);国家重大科学仪器开发专项资助项目(2012YQ150256)
- DOI：10.7652/xjtuxb201901010
  中图分类号： TM351
- 网络首发：2019-01-10，
  
  纸质出版：2019
- 稿件说明：
移动端阅览
刘洋, 左曙光, 邓文哲. 含辅助槽轴向永磁电机的电磁力波分析及抑制[J]. 西安交通大学学报, 2019,53(1):77-85.

Suppression of Electromagnetic Force Wave of Axial Permanent Magnet Motor with Auxiliary Slot[J]. 2019, 53(1): 77-85.
刘洋, 左曙光, 邓文哲. 含辅助槽轴向永磁电机的电磁力波分析及抑制[J]. 西安交通大学学报, 2019,53(1):77-85. DOI： 10.7652/xjtuxb201901010.

Suppression of Electromagnetic Force Wave of Axial Permanent Magnet Motor with Auxiliary Slot[J]. 2019, 53(1): 77-85. DOI： 10.7652/xjtuxb201901010.

摘要

为了有效抑制轴向永磁电机的主要电磁力波

针对2类主要电磁力波来源不同的轴向永磁电机

通过解析的方法推导出可以有效削弱其主要电磁力波的定子齿辅助槽位置规律; 将该辅助槽位置规律应用到16极24槽和30极27槽2款主要电磁力波来源不同的轴向永磁电机

分别分析了定子齿辅助槽宽度和深度对主要电磁力波的影响; 通过有限元法计算了这2款轴向永磁电机在定子齿添加辅助槽前后的电磁噪声及转矩特性

结果表明

2款轴向永磁电机的主要电磁力波幅值分别下降了38%和76%

电磁噪声均降低了3 dB以上

同时

电机输出性能的降幅在3%以内。

Abstract

To suppress the main electromagnetic force wave of an axial permanent magnet motor

the rule of stator tooth's auxiliary slot position is obtained analytically to attempt to weaken the main electromagnetic force wave effectively for two types of axial permanent magnet motor with different main electromagnetic force wave sources. Following the rule of auxiliary slot position on the 16-pole 24-slot or 30-pole 27-slot axial permanent magnet motor with different main electromagnetic force wave source

the effects of stator tooth auxiliary slot width and depth on the main electromagnetic force wave are analyzed respectively. The electromagnetic noise and torque characteristics of the two types of axial permanent magnet motor with stator tooth auxiliary slot are evaluated by finite element model

and the results show that the main electromagnetic force wave amplitudes of these motors are lowered by 38% and 76% respectively

and the electromagnetic noise is reduced by more than 3 dB

meanwhile the output performance of the motors decreases by no more than 3%.

关键词

Keywords

references

王秀和. 永磁电机 [M]. 北京: 中国电力出版社, 2010.

黄允凯, 周涛, 董剑宁, 等. 轴向永磁电机及其研究发展综述 [J]. 中国电机工程学报, 2015, 35(1): 192-205.

HUANG Yunkai, ZHOU Tao, DONG Jianning, et al. An overview on developments and researches of axial flux permanent magnet machines [J]. Proceedings of the CSEE, 2015, 35(1): 192-205.

钟再敏, 江尚, 康劲松, 等. 永磁同步电机谐波电压与电流的耦合模型及前馈控制 [J]. 电工技术学报, 2017, 32(18): 131-142.

ZHONG Zaimin, JIANG Shang, KANG Jingsong, et al. A harmonic voltage and current coupling permanent magnet synchronous motor model and feedforward control [J]. Transactions of China Electrotechnical Society, 2017, 32(18): 131-142.

左曙光, 吴双龙, 吴旭东, 等. 轴向磁通永磁同步电机转矩解析模型和转矩优化 [J]. 电工技术学报, 2016, 31(23): 46-53.

ZUO Shuguang, WU Shuanglong, WU Xudong, et al. Analytical model and optimization of torque of an axial flux permanent magnet synchronous motor [J]. Transactions of China Electrotechnical Society, 2016, 31(23): 46-53.

邓文哲, 左曙光, 林福, 等. 偏心条件下轴向磁通轮毂电机不平衡弯矩建模与分析 [J]. 电工技术学报, 2017, 32(13): 153-161.

DENG Wenzhe, ZUO Shuguang, LIN Fu, et al. Modeling and analysis of unbalanced moment for an axial-flux in-wheel motor with eccentricity [J]. Transactions of China Electrotechnical Society, 2017, 32(13): 153-161.

黄克峰, 李槐树, 周羽. 利用辅助槽削弱齿槽力的方法研究 [J]. 电机与控制学报, 2014, 18(3): 54-59.

HUANG Kefeng, LI Huaishu, ZHOU Yu. Method research for reducing the cogging force by auxiliary slots [J]. Electric Machines and Control, 2014, 18(3): 54-59.

ZHAO G, HUA W, ZHU X, et al. The influence of dummy slots on stator surface-mounted permanent magnet machines [J]. IEEE Transactions on Magnetics, 2017, 53(6): 1-5.

ZHANG G, WANG F, SHEN Y. Reduction of rotor loss and cogging torque of high speed PM machine by stator teeth notching [C]∥Proceedings of 10th International Conference on Electrical Machines and Systems. Piscataway, NJ, USA: IEEE, 2007: 856-859.

NAKANO M, MORITA Y, MATSUNAGA T. Reduction of cogging torque due to production tolerances of rotor by using dummy slots placed partially in axial direction [J]. IEEE Transactions on Industry Applications, 2015, 51(6): 4372-4382.

MA G, LI G, ZHOU R, et al. Effect of stator and rotor notches on cogging torque of permanent magnet synchronous motor [C]∥Proceedings of 20th International Conference on Electrical Machines and Systems. Piscataway, NJ, USA: IEEE, 2017: 1-5.

ZHANG B, WANG X, ZHANG R, et al. Cogging torque reduction by combining teeth notching and rotor magnets skewing in PM BLDC with concentrated windings [C]∥Proceedings of 11th International Conference on Electrical Machines and Systems. Piscataway, NJ, USA: IEEE, 2008: 3189-3192.

张冉, 王秀和, 乔东伟, 等. 基于辅助槽的永磁电机激振力波削弱方法 [J]. 中国电机工程学报, 2010, 30(18): 103-108.

ZHANG Ran, WANG Xiuhe, QIAO Dongwei, et al. Reduction of exciting force wave for permanent magnet motors by teeth notching [J]. Proceedings of the CSEE, 2010, 30(18): 103-108.

LAN H, CHEN Q, ZOU J, et al. Influence of dummy slots on noise and vibration performance in permanent magnet synchronous machines [C]∥IEEE Transportation Electrification Conference and Expo. Piscataway, NJ, USA: IEEE, 2017: 1-6.

JIANG J W, BILGIN B, SATHYAN A, et al. Noise and vibration reduction for IPMSM by using rotor circumferential slits [C]∥Proceedings of 20th International Electric Machines and Drives Conference. Piscataway, NJ, USA: IEEE, 2017: 1-8.

HWANG S M, EOM J B, HWANG G B, et al. Cogging torque and acoustic noise reduction in permanent magnet motors by teeth pairing [J]. IEEE Transactions on Magnetics, 2000, 36(5): 3144-3146.

DENG Wenzhe, ZUO Shuguang, LIN Fu, et al. Influence of pole and slot combinations on vibration and noise in external rotor axial flux in-wheel motors [J]. IET Electric Power Applications, 2017, 11(4): 586-594.

ZUO S G, LIN F, WU X D. Noise analysis, calculation, and reduction of external rotor permanent-magnet synchronous motor [J]. IEEE Transactions on Industrial Electronics, 2015, 62(10): 6204-6212.

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

EBSILON软件在热电联产系统优化中的应用综述

不同板叠材料热声热机能量转换过程数值模拟研究

超临界水异常区域热力学特性研究

超临界二氧化碳向心透平轮背间隙内风阻损失及流动特性研究

三塔合一间接空冷系统结构参数对夏季运行特性的影响研究