利用电热耦合效应的金属单点接触结构无源互调研究

李军 1; 2; 赵小龙 1; 高凡 1; 张松昌 1; 贺永宁 1; 崔万照 2; 徐卓 1

doi:10.7652/xjtuxb201809010

您当前的位置：

首页 >

文章列表页 >

利用电热耦合效应的金属单点接触结构无源互调研究

更新时间：2025-05-01

- 利用电热耦合效应的金属单点接触结构无源互调研究
- Passive Intermodulation of Metal Point Contact Structure Based on Electrothermal Coupling Effect
- 西安交通大学学报 2018年52卷第9期页码：76-81+117
- 作者机构：
  
  1. 西安交通大学电子与信息工程学院,西安,710049
  2. 西安空间无线电技术研究所,西安,710100
- 作者简介：
- 基金信息：
  
  : 2017-12-10。作者简介: 李军(1969—),男,在职博士生;贺永宁(通信作者),女,教授,博士生导师。基金项目: 国家自然科学基金资助项目(U1537211)
- DOI：10.7652/xjtuxb201809010
  中图分类号： TN911.7
- 网络首发：2018-09-10，
  
  纸质出版：2018
- 稿件说明：
移动端阅览
李军 1, 2, 赵小龙 1, 等. 利用电热耦合效应的金属单点接触结构无源互调研究[J]. 西安交通大学学报, 2018,52(9):76-81+117.

Passive Intermodulation of Metal Point Contact Structure Based on Electrothermal Coupling Effect[J]. 2018, 52(9): 76-81+117.
李军 1, 2, 赵小龙 1, 等. 利用电热耦合效应的金属单点接触结构无源互调研究[J]. 西安交通大学学报, 2018,52(9):76-81+117. DOI： 10.7652/xjtuxb201809010.

Passive Intermodulation of Metal Point Contact Structure Based on Electrothermal Coupling Effect[J]. 2018, 52(9): 76-81+117. DOI： 10.7652/xjtuxb201809010.

摘要

针对现有无源互调(PIM)模型不能准确解释互调机理并描述测试规律的问题

提出了一种基于电热耦合效应的PIM产生机理和模型

并利用金属单点接触结构进行了实验验证。首先

提出了一种基于缝隙波导近场耦合的PIM测试方法

该方法使待测结构与测试工装分离

克服了传统PIM实验研究针对整体微波部件进行测试分析的限制

能够实现单个点接触结构的PIM效应研究; 然后

对铝接触在不同状态下的表面成分和电接触特性进行研究

结果表明

金属表面存在的氧化层和沾污物是引起其接触结PIM产生与劣化的根本原因

微波辐照时电热耦合效应影响接触结的阻抗; 最后

通过实验获取了铝、紫铜和黄铜等材料组成的单点接触结构的PIM。实验和理论结果表明

相对于传统的数学经验模型或多项式数学拟合

结合电热耦合的接触非线性模型从物理底层出发

对PIM的产生根源和机理给出了明确解释

能够更加准确地计算和预测PIM。

Abstract

A passive intermodulation(PIM)model based on electrothermal coupling effect is proposed to address the problem that current PIM model cannot explain the PIM mechanism and describe the experimental rules accurately. This model is further verified experimentally by using a metal point contact structure. First

a near-field coupling PIM measurement method based on waveguide slot is established

which makes the device under test(DUT)separate with the test equipment. This method overcomes the restriction in traditional PIM experimental research for measuring the whole microwave components

and realizes the research on the PIM effect of metal point contact structure. Then

the surface composition and the electrical contact characteristics of an aluminum metal point contact structure are investigated by EDX and I-V characteristics test

respectively. The results show that the oxidation and contamination existing on the metal surface dominates the PIM generation and degradation of metal contact. Moreover

the electrothermal coupling effect in microwave stimulating is proved to have significant impact on the contact impedance. Finally

a PIM model based on electrothermal coupling effect is proposed and verified by the experimental tests on metal point contact structures made of aluminum

brass and copper. Theoretical and experimental results show that

compared with the traditional empirical model or polynomial model

the proposed nonlinear contact model based on electrothermal coupling effect can improve the PIM calculation and prediction dramatically by giving a clear explanation of PIM's origin and mechanism.

关键词

Keywords

references

SEA R G. An algebraic formula for amplitudes of intermodulation products involving an arbitrary number of frequencies [J]. Proceedings of the Institute of Electrical and Electronics Engineers, 1968, 56(8): 1388-1389.

SEA R G, VACROUX A G. On the computation of intermodulation products for a power series nonlinearity [J]. Proceedings of the Institute of Electrical and Electronics Engineers, 1969, 57(3): 337-338.

SHAYEGANI A, SALMON J, SINGH R R. Multicarrier PIM behavior and testing in communications satellites [C]∥The 32nd AIAA International Communications Satellite Systems Conference. Reston, VA, USA: AIAA, 2014: 4249.

AL-MUDHAFAR A, HARTNAGEL H. Bit error probability in the presence of passive intermodulation [J]. IEEE Communications Letters, 2012, 16(8): 1145-1148.

CHOU S J, CHOU H T, KUO L R. Potential causes of PIM problems in the LTE outdoor base station multi-band antennas [C]∥2016 International Symposium on Antennas and Propagation. Piscataway, NJ, USA: IEEE, 2016: 1080-1081.

LUI P L. Passive intermodulation interference in communication systems [J]. Electronics Communication Engineering Journal, 1990, 2(3): 109-118.

叶鸣, 贺永宁, 孙勤奋, 等. 大功率条件下的无源互调干扰问题综述 [J]. 空间电子技术, 2013(1): 75-83.

YE Ming, HE Yongning, SUN Qinfen, et al. Review of passive intermodulation interference problem under high power signals [J]. Space Electronic Technology, 2013(1): 75-83.

LUBRANO V, MIZZONI R, SILVESTRUCCI F, et al. PIM characteristics of the large deployable reflector antenna mesh [C]∥The 4th International Workshop on Multipactor, Corona and Passive Intermodulation in Space RF Hardware. Frascati, Italy: ESTEC, 2003: 1-8.

BOLLI P, SELLERI S, PELOSi G. Passive intermodulation on large reflector antennas [J]. IEEE Antennas and Propagation Magazine, 2002, 44(5): 13-20.

ZHAO X, HE Y, YE M, et al. Analytic passive intermodulation model for flange connection based on metallic contact nonlinearity approximation [J]. IEEE Transactions on Microwave Theory and Techniques, 2017, 65(7): 2279-2287.

高凡. 基于近场耦合的无源互调测试方法的研究 [D]. 西安: 西安交通大学, 2017: 20-30.

VICENTE C, HARTNAGEL H L. Passive-intermodulation analysis between rough rectangular waveguide flanges [J]. IEEE Transactions on Microwave Theory and Techniques, 2005, 53(8): 2515-2525.

程礼椿. 电接触理论及应用 [M]. 北京: 机械工业出版社, 1988: 35-39.

YE M, HE Y, ZHU H. Empirical equation for carrier power dependence of passive intermodulation product [C]∥2015 IEEE International Wireless Symposium. Piscataway, NJ, USA: IEEE, 2015: 1-4.

SOMBRIN J, SOUBERCAZE-PUN G, ALBERT I. New models for passive non linearities generating intermodulation products with non-integer slopes [C]∥The 7th European Conference on Antennas and Propagation. Piscataway, NJ, USA: IEEE, 2013: 25-28.

KOZLOV D S, SHITVOV A P, SCHUCHINSKY A G. Passive intermodulation in distributed circuits with cascaded discrete nonlinearities [C]∥The 9th European Conference on Antennas and Propagation. Piscataway, NJ, USA: IEEE, 2015: 1-5.

PEI Z, TONG L. Carrier power dependence and avoidance methods of passive intermodulation product [C]∥ International Conference on Mechatronics, Electronic, Industrial and Control Engineering. Paris, France: Atlantis Press, 2015: 1037-1041.

SHITVOV A P, KOZLOV D S, SCHUCHINSKY A G. Communication nonlinearities techniques for analysis of passive intermodulation [C]∥The 8th International Workshop on Multipactor, Corona and Passive Intermodulation in Space RF Hardware. Frascati, Italy: ESTEC, 2014: 17-19.

SHITVOV A, ZELENCHUK D, SCHUCHINSKY A. Carrier-power dependence of passive intermodulation products in printed lines [C]∥Antennas Propagation Conference. Piscataway, NJ, USA: IEEE, 2009: 177-180.

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

电热耦合引起的微带传输线无源互调计算与验证

金属波导连接的无源互调非线性物理机制和计算方法

混合电解槽阵列协同的风光耦合制氢系统双层多目标优化

不同板叠材料热声热机能量转换过程数值模拟研究

张角凹坑气膜孔对双层壁气膜冷却特性的影响