倾斜式双滚柱包络环面蜗杆传动弹流润滑分析

李金宽 1

doi:10.7652/xjtuxb201803012

您当前的位置：

首页 >

文章列表页 >

倾斜式双滚柱包络环面蜗杆传动弹流润滑分析

更新时间：2025-11-17

- 倾斜式双滚柱包络环面蜗杆传动弹流润滑分析
- Analysis of Elastohydrodynamic Lubrication of Inclined Double-Roller Enveloping Hourglass Worm Drive
- 西安交通大学学报 2018年52卷第3期页码：83-90
- 作者机构：
  
  西华大学机械工程学院,成都,610039
- 作者简介：
- 基金信息：
  
  : 2017-09-13。作者简介: 李金宽(1990—),男,博士;柳在鑫(通信作者),男,博士,副教授。基金项目: 教育部春晖计划资助项目(Z2015105);四川省教育厅重点资助项目(17ZA0358);西华大学自然科学基金资助项目(z420208)
- DOI：10.7652/xjtuxb201803012
  中图分类号： TH117.2;TH132.41
- 纸质出版：2018
- 稿件说明：
移动端阅览
李金宽 1. 倾斜式双滚柱包络环面蜗杆传动弹流润滑分析[J]. 西安交通大学学报, 2018,52(3):83-90.

李金宽 1. Analysis of Elastohydrodynamic Lubrication of Inclined Double-Roller Enveloping Hourglass Worm Drive[J]. 2018, 52(3): 83-90.
李金宽 1. 倾斜式双滚柱包络环面蜗杆传动弹流润滑分析[J]. 西安交通大学学报, 2018,52(3):83-90. DOI： 10.7652/xjtuxb201803012.

李金宽 1. Analysis of Elastohydrodynamic Lubrication of Inclined Double-Roller Enveloping Hourglass Worm Drive[J]. 2018, 52(3): 83-90. DOI： 10.7652/xjtuxb201803012.

摘要

为了研究倾斜式双滚柱包络环面蜗杆传动在啮合过程中考虑粗糙度时的润滑特性

根据弹性流体动力润滑理论和牛顿流体弹流润滑模型

建立了倾斜式双滚柱包络环面蜗杆传动的弹流润滑简化模型和线接触弹流润滑数学模型。考虑共轭齿面粗糙峰和粗糙谷对弹流润滑的影响

采用牛顿迭代法和牛顿-拉夫逊法对该传动副进行了数值求解

分别得出粗糙峰和粗糙谷在不同粗糙度幅值时的油膜厚度和油膜压力曲线

并分析了一个共轭齿对从啮入到啮出不同啮合时刻的油膜厚度和油膜压力。最后

分析了滚柱半径、喉径系数、滚柱偏距对弹流润滑特性的影响。结果表明:粗糙度的存在对传动副的润滑是不利的

粗糙度幅值越大

越不利于传动副的润滑; 在第3个齿开始啮入的时刻

是传动副润滑的最危险区; 要保持该传动副具有良好的润滑性能

滚柱半径、滚柱偏距不宜过大

喉径系数不宜过小。

Abstract

To study the lubrication property with consideration of the conjugating surface roughness in transmission process of inclined double-roller enveloping hourglass worm drive

a simplified model of elastohydrodynamic lubrication(EHL)and a line contact mathematical model are established with Newtonian fluid EHL model based on the meshing theory and EHL theory. Considering the influences of rough peaks and rough grooves on conjugating surface on the EHL of this worm drive

the oil film pressure and thickness curves are obtained by using Newton iteration and Newton-Raphson method at different roughness amplitudes

and the oil film pressure and thickness of one conjugating tooth-pair are analyzed at different meshing points from meshing in to meshing out. At last

the influences of roller radius

orifice coefficient and offset distance on the EHL characteristics of this worm drive are analyzed. The results show that the conjugating surface roughness has adverse effect on the lubrication property of this worm drive. At the moment when the third tooth begins to mesh in

it is the most dangerous area for the EHL of this worm drive. The roller radius and offset distance should not be too big

and the orifice coefficient should not be too small

for effectively improving the lubrication property of this worm drive.

关键词

Keywords

references

王优强, 卞荣. 连续波状粗糙度对直齿轮热弹流润滑的影响 [J]. 机械工程学报, 2009, 45(8): 112-118.

WANG Youqiang, BIAN Rong. Influence of surface roughness wave on thermal elastohydrodynamic lubrication of involute spur gears [J]. Journal of Mechanical Engineering, 2009, 45(8): 112-118.

CHEN Yonghong, ZHANG Guanghui, CHEN Bingkui, et al. A novel enveloping worm pair via employing the conjugating planar internal gear as counterpart [J]. Mechanism and Machine Theory, 2013, 67: 17-31.

SIMON V. EHD lubrication characteristics of a new type of ground cylindrical worm gearing [J]. Journal of Mechanical Design, 1997, 119(1): 101-107.

SHARIF K J, KONG S, EVANS H P, et al. Contact and elastohydrodynamic analysis of worm gears: part 1 Theoretical formulation [J]. Proceedings of the Institution of Mechanical Engineers: Part C Journal of Mechanical Engineering Science, 2001, 215(7): 817-830.

SHARIF K J, KONG S, EVANS H P, et al. Contact and elastohydrodynamic analysis of worm gears: part 2 Results [J]. Proceedings of the Institution of Mechanical Engineers: Part C Journal of Mechanical Engineering Science, 2001, 215(7): 831-846.

张有忱, 孟惠荣, 张立仁. 蜗杆传动的弹流润滑研究 [J]. 机械设计, 1999(10): 24-25.

ZHANG Youchen, MENG Huirong, ZHANG Liren. Analysis of elastohydrodynamic lubrication of worm drive [J]. Journal of Machine Design, 1999(10): 24-25.

张有忱, 康凯, 张立仁. 圆弧圆柱蜗杆传动弹流润滑分析 [J]. 北京化工大学学报, 2001, 28(2): 52-55.

ZHANG Youchen, KANG Kai, ZHANG Liren. Analysis of the elastohydrodynamic lubrication of arc cylindrical worm drive [J]. Journal of Beijing University of Chemical Technology, 2001, 28(2): 52-55.

刘绪仁, 安兆达. 有限元法在蜗杆传动弹流润滑中的应用 [J]. 哈尔滨工业大学学报, 1990, 22(6): 94-96.

LIU Xuren, AN Zhaoda. An application of the finite element method in EHL of worm drive [J]. Journal of Harbin Institute of Technology, 1990, 22(6): 94-96.

王进戈, 张均富, 王强. 滚锥包络环面蜗杆传动的润滑状态分析 [J]. 哈尔滨工业大学学报, 2005, 37(7): 940-942.

WANG Jinge, ZHANG Junfu, WANG Qiang. Lubrication states analyses on rolling cone enveloping hourglass worm gearing [J]. Journal of Harbin Institute of Technology, 2005, 37(7): 940-942.

邱昕洋, 张光辉, 秦大同. 钢制平面蜗轮传动弹流润滑分析 [J]. 重庆大学学报, 2010, 33(3): 24-29.

QIU Xinyang, ZHANG Guanghui, QIN Datong. Analysis of elastohydrodynamic lubrication of steel planar wormgear drive [J]. Journal of Chongqing University, 2010, 33(3): 24-29.

杨捷, 王进戈, 陈守安, 等. 无侧隙平面一次包络端面啮合环面蜗杆副弹流润滑分析 [J]. 西安交通大学学报, 2017, 51(3): 87-91.

YANG Jie, WANG Jinge, CHEN Shouan, et al. Analysis on elastohydrodynamic lubrication of the planar enveloped toroidal worm in anti-backlash endface meshing [J]. Journal of Xi'an Jiaotong University, 2017, 51(3): 87-91.

李金宽, 柳在鑫, 张翠. 倾斜式双圆柱滚子包络环面蜗杆传动的等温弹流润滑分析 [J]. 西安交通大学学报, 2017, 51(5): 88-94.

LI Jinkuan, LIU Zaixin, ZHANG Cui. Analysis on isothermal elastohydrodynamic lubrication performance of inclined double-roller enveloping hourglass worm drive [J]. Journal of Xi'an Jiaotong University, 2017, 51(5): 88-94.

柳在鑫, 王进戈, 张均富, 等. 交错轴双滚子包络环面蜗杆传动啮合分析 [J]. 四川大学学报(工程科学版), 2012, 44(4): 221-225.

LIU Zaixin, WANG Jinge, ZHANG Junfu, et al. Meshing analysis of non-parallel double-roller enveloping hourglass worm gearing [J]. Journal of Sichuan University(Engineering Science Edition), 2012, 44(4): 221-225.

柳在鑫, 王进戈, 张均富. 倾斜式双圆柱滚子包络环面蜗杆传动几何特性分析 [J]. 北京理工大学学报, 2013, 33(5): 459-464.

LIU Zaixin, WANG Jinge, ZHANG Junfu. Geometrical characteristics analysis of non-parallel double-roller enveloping hourglass worm gearing [J]. Transactions of Beijing Institute of Technology, 2013, 33(5): 459-464.

柳在鑫, 王进戈, 张均富, 等. 倾斜式双滚子包络环面蜗杆副承载能力研究 [J]. 高技术通讯, 2013, 23(5): 491-496.

LIU Zaixin, WANG Jinge, ZHANG Junfu, et al. Research on the load carrying capacity of inclined double-roller enveloping hourglass worm gears [J]. Chinese High Technology Letters, 2013, 23(5): 491-496.

温诗铸, 杨沛然. 弹性流体动力润滑 [M]. 北京: 清华大学出版社, 1992, 13-16, 63-111.

HUANG P, WEN S Z. Sectional micro-elasto-hydrodynamic lubrication [J]. ASME Journal of Tribology, 1993, 115(1): 148-151.

黄平. 润滑数值计算方法 [M]. 北京: 高等教育出版社, 2012: 151-154.

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

超临界二氧化碳向心透平轮背间隙内风阻损失及流动特性研究

水蒸气掺混对氨裂解气旋流燃烧与排放特性的影响研究

隧道内燃料电池汽车氢气泄漏扩散特性及影响因素

结构-语义-残差协同的图像压缩框架：面向隐私保护与高保真重建

不同板叠材料热声热机能量转换过程数值模拟研究