HAN J C. Gas turbine heat transfer and cooling technology [J]. Proceedings of the National Heat Transfer Conference, 2001, 2: 1943-1946.

GLEZER B, MOON H K, O'CONNELL T. A novel technique for the internal blade cooling [C]∥Proceeding of ASME Turbo Expo 1996. New York, USA: ASME, 1996: V004T09A015.

KREITH F, MARGOLIS D. Heat transfer and friction in turbulent vortex flow [J]. Applied Scientific Research: Section A, 1959, 8(1): 457-473.

LING J P C W, IRELAND P T, HARVEY N W. Measurement of heat transfer coefficient distributions and flow field in a model of a turbine blade cooling passage with tangential injection [C]∥Proceeding of ASME Turbo Expo 2006. New York, USA: ASME, 2006: 325-340.

HEDLUND C R, LIGRANI P M, GLEZER B, et al. Heat transfer in a swirl chamber at different temperature ratios and Reynolds numbers [J]. International Journal of Heat and Mass Transfer, 1999, 42(22): 4081-4091.

HEDLUND C R, LIGRANI P M, MOON H K, et al. Heat transfer and flow phenomena in a swirl chamber simulating turbine blade internal cooling [J]. ASME Journal of Turbomachinery, 1999, 121(4): 804-813.

HEDLUND C R, LIGRANI P M. Local swirl chamber heat transfer and flow structure at different Reynolds numbers [J]. ASME Journal of Turbomachinery, 2000, 122(2): 375-385.

DU C, LI L, LI S, et al. Effects of aerodynamic parameters on steam vortex cooling behavior for gas turbine blade leading edge [J]. Proceedings of the Institution of Mechanical Engineers: Part A Journal of Power and Energy, 2016, 230(4): 354-365.

杜长河, 范小军, 李亮, 等. 喷射角度和喷嘴数对旋流冷却流动与传热特性的影响 [J]. 西安交通大学学报, 2016, 50(4): 76-80.

DU Changhe, FAN Xiaojun, LI Liang, et al. Influences of jet angle and jet nozzle number on flow and heat transfer characteristics of swirl cooling [J]. Journal of Xi'an Jiaotong University, 2016, 50(4): 76-80.

范小军, 杜长河, 李亮, 等. 4种冷却结构对叶片前缘流动换热影响的比较研究 [J]. 西安交通大学学报, 2017, 51(7): 37-43.

FAN Xiaojun, DU Changhe, LI Liang, et al. Comparative study of four cooling structures on flow and heat transfer behavior of blade leading edge [J]. Journal of Xi'an Jiaotong University, 2017, 51(7): 37-43.

徐亮,兰进,高建民,等.一种类螺纹孔结构的旋转射流换热特性数值模拟.2017,51(9):11-18.[doi:10.7652/xjtuxb2017 09002]

范小军,杜长河,李亮,等.4种冷却结构对叶片前缘流动换热影响的比较研究.2017,51(7):37-43.[doi:10.7652/xjtuxb 201707006]

杜长河,范小军,李亮,等.旋转半径和叶片安装角对动叶旋流冷却流动和传热特性的影响.2017,51(5):37-42.[doi:10.7652/xjtuxb201705006]

康蕊,厉彦忠,杨宇杰,等.轴向导热对板翅式换热器传热性能的影响.2017,51(2):140-148.[doi:10.7652/xjtuxb201702 022]

杜长河,范小军,李亮,等.抽吸孔对旋流和冲击冷却流动传热特性的影响.2017,51(1):19-24.[doi:10.7652/xjtuxb2017 01004]

张峰,王新军,李军.球凹平板冲击冷却性能的数值研究及结构改进.2016,50(1):124-130.[doi:10.7652/xjtuxb201601 019]

潘辉,冯松,刘朝晖,等.航空煤油RP-3热裂解结焦流动换热特性实验研究.2016,50(7):7-12.[doi:10.7652/xjtuxb2016 07002]

陈宇佳,杜长河,李亮.蒸汽冷却带肋矩形通道流动和换热特性数值研究.2016,50(3):62-67.[doi:10.7652/xjtuxb201603 010]