基于空间分布弹性模量的快速动网格方法

仲继泽 1; 谢志强 1; 沈渡 1; 徐自力 2

doi:10.7652/xjtuxb201802021

您当前的位置：

首页 >

文章列表页 >

基于空间分布弹性模量的快速动网格方法

更新时间：2025-07-09

- 基于空间分布弹性模量的快速动网格方法
- A Fast Dynamic Mesh Method Based on Spatially Distributed Elasticity Modulus
- 西安交通大学学报 2018年52卷第2期页码：136-19+147
- 作者机构：
  
  中国舰船研究设计中心船舶振动噪声重点实验室,武汉,430064
- 作者简介：
- 基金信息：
  
  : 2017-08-10。作者简介: 仲继泽(1988—),男,博士,工程师;谢志强(通信作者),男,高级工程师。基金项目: 国家自然科学基金资助项目(51675406)
- DOI：10.7652/xjtuxb201802021
  中图分类号： O323;O351.2
- 网络首发：2018-02-10，
  
  纸质出版：2018
- 稿件说明：
移动端阅览
仲继泽 1, 谢志强 1, 沈渡 1, 等. 基于空间分布弹性模量的快速动网格方法[J]. 西安交通大学学报, 2018,52(2):136-19+147.

A Fast Dynamic Mesh Method Based on Spatially Distributed Elasticity Modulus[J]. 2018, 52(2): 136-19+147.
仲继泽 1, 谢志强 1, 沈渡 1, 等. 基于空间分布弹性模量的快速动网格方法[J]. 西安交通大学学报, 2018,52(2):136-19+147. DOI： 10.7652/xjtuxb201802021.

A Fast Dynamic Mesh Method Based on Spatially Distributed Elasticity Modulus[J]. 2018, 52(2): 136-19+147. DOI： 10.7652/xjtuxb201802021.

摘要

为解决基于单一弹性模量的快速动网格方法的网格扭曲问题

提出了一种基于空间分布弹性模量的快速动网格方法。根据流场网格的大小在空间的分布设定虚拟弹性体的弹性模量的空间分布。组集每一个网格的单元刚度矩阵得到虚拟弹性体的整体刚度矩阵

进而得到虚拟弹性体变形的静力平衡方程

并与结构振动方程和耦合面位移插值方程联立推导出结构-虚拟弹性体整体的动力学方程

通过振型截断方法计算结构和流场网格变形。对于标准弹性梁流固耦合和Agard Wing 445.6颤振问题中出现非法网格(网格最小角为0°)的工况

该方法得到的弹性梁流场网格变形后的最小角均维持在67°以上

而机翼流场网格变形后的最小角均维持在36°以上。

Abstract

A fast dynamic mesh method based on spatially distributed elasticity modulus is developed to settle the mesh distortion of the fast dynamic mesh method based on one single elasticity modulus. The space distribution of elasticity modulus is set according to the size distribution of meshes in space of meshes. The stiffness matrix of the whole pseudo elastic solid is derived by combining element stiffness matrixes of all meshes. Then the dynamic equation for the structure-pseudo elastic solid system is derived using the static equilibrium equation of the pseudo elastic solid

the vibration equation of the structure and the displacement interpolation equation of the fluid structure interface. Deformation is calculated for the structure and the pseudo elastic solid using the modal superposition of the structure-pseudo elastic solid system. A flow mesh with the minimum face angle equal to 0 deg is called an illegal mesh. The present method is tested on an illegal mesh with the standard beam and Agard Wing 445.6. The minimum face angle after deformation given by the present method is above 67deg for the flow mesh of the beam and the minimum face angle after deformation is above 36deg for the flow mesh of the wing.

关键词

Keywords

references

DOWELL E H. Some recent advances in nonlinear aeroelasticity: fluid-structure interaction in the 21st century [C]∥Proceedings of the AIAA Structures, Structural Dynamics, and Materials Conference. Reston, VA, USA: AIAA, 2010: 1-7.

张伟伟, 高传强, 叶正寅. 气动弹性计算中网格变形方法研究进展 [J]. 航空学报, 2014, 35(2): 303-319.

ZHANG Weiwei, GAO Chuanqiang, YE Zhengyin. Research progress on mesh deformation method in computational aeroelasticity [J]. Acta Aeronautica et Astronautica Sinica, 2014, 35(2): 303-319.

TEZDUYAR T E. Stabilized finite element formulations for incompressible flow computations [J]. Advances in Applied Mechanics, 1991, 28(C): 1-44.

ZHOU X, LI S. A new mesh deformation method based on disk relaxation algorithm with pre-displacement and post-smoothing [J]. Journal of Computational Physics, 2013, 235(2): 199-215.

仲继泽, 徐自力, 陶磊. 基于虚拟弹性体的快速动网格方法 [J]. 西安交通大学学报, 2016, 50(10): 132-138.

ZHONG Jize, XU Zili, TAO Lei. An efficient dynamic mesh method based on pseudo elastic solid [J]. Journal of Xi'an Jiaotong University, 2016, 50(10): 132-138.

ZHONG Jize, XU Zili. A modal approach for coupled fluid structure computations of wing flutter [J]. Proceedings of the Institution of Mechanical Engineers: Part G Journal of Aerospace Engineering, 2017, 231(1): 72-81.

STEIN K, TEZDUYAR T, BENNEY R. Mesh moving techniques for fluid-structure interactions with large displacements [J]. Journal of Applied Mechanics, 2003, 70(1): 58-63.

HUO S H, WANG F S, YAN W Z, et al. Layered elastic solid method for the generation of unstructured dynamic mesh [J]. Finite Elements in Analysis and Design, 2010, 46(10): 949-955.

TUREK S, HRON J. Proposal for numerical benchmarking of fluid-structure interaction between an elastic object and laminar incompressible flow [M]. Berlin, Germany: Springer, 2006: 371-385.

YATES E C J. AGARD standard aeroelastic configurations for dynamic response [J]. European Psychiatry, 1987, 25(10): 1596-1597.

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

张角凹坑气膜孔对双层壁气膜冷却特性的影响

冷库水平空气幕热湿阻隔性能数值模拟研究

不同板叠材料热声热机能量转换过程数值模拟研究

超临界水异常区域热力学特性研究

水蒸气掺混对氨裂解气旋流燃烧与排放特性的影响研究