一种数控滚齿机工作台动态特性建模方法及实验分析

申建广 1; 陶涛 1; 梅雪松 1; 2; 刘星 1; 马星星 1; 杜志国 1

doi:10.7652/xjtuxb201712001

您当前的位置：

首页 >

文章列表页 >

一种数控滚齿机工作台动态特性建模方法及实验分析

更新时间：2025-07-09

- 一种数控滚齿机工作台动态特性建模方法及实验分析
- Modeling and Experimental Analysis for Worktable Dynamic Characteristics of CNC Gear Hobbing Machine
- 西安交通大学学报 2017年51卷第12期页码：1-7+75
- 作者机构：
  
  西安交通大学机械工程学院,西安,710049
- 作者简介：
- 基金信息：
  
  : 2017-03-01。作者简介: 申建广(1984—),男,博士生;陶涛(通信作者),男,教授,博士生导师。基金项目: 国家科技重大专项资助项目(2015ZX04005001)
- DOI：10.7652/xjtuxb201712001
  中图分类号： TN772
- 网络首发：2017-12-10，
  
  纸质出版：2017
- 稿件说明：
移动端阅览
申建广 1, 陶涛 1, 梅雪松 1, 等. 一种数控滚齿机工作台动态特性建模方法及实验分析[J]. 西安交通大学学报, 2017,51(12):1-7+75.

Modeling and Experimental Analysis for Worktable Dynamic Characteristics of CNC Gear Hobbing Machine[J]. 2017, 51(12): 1-7+75.
申建广 1, 陶涛 1, 梅雪松 1, 等. 一种数控滚齿机工作台动态特性建模方法及实验分析[J]. 西安交通大学学报, 2017,51(12):1-7+75. DOI： 10.7652/xjtuxb201712001.

Modeling and Experimental Analysis for Worktable Dynamic Characteristics of CNC Gear Hobbing Machine[J]. 2017, 51(12): 1-7+75. DOI： 10.7652/xjtuxb201712001.

摘要

为了研究数控滚齿加工中滚刀轴转速波动引起的工件轴速度波动的动态响应特性

对数控滚齿机旋转工作台即工件轴的伺服控制问题进行了分析。首先根据电机学原理和机械动力学原理对伺服控制系统组成的各个环节进行了建模和分析

推导出旋转工作台的整体伺服控制系统模型

并考虑到伺服控制环节在动态响应过程中的摩擦因素

引入了非线性Stribeck黏性摩擦结构; 然后利用Simulink建立了滚齿机旋转工作台的伺服系统仿真模型

并研究了不同的位置和速度指令频率变化对工件轴伺服动态响应影响效果; 最后通过数控滚齿机工作台控制实验来验证工件轴的动态响应特性。仿真结果表明:旋转工作台伺服系统在低速运行时

位置跟踪存在“平顶”现象

速度跟踪存在“死区”现象; 旋转工作台伺服系统位置和速度的跟随率随着指令频率的增大而减小

当指令频率增大到31 Hz时

速度跟随率不足10%。在和仿真相同的指令频率变化条件下

进行滚齿机工件轴的转速控制实验

工件轴的响应曲线与仿真响应曲线基本吻合

验证了模型的有效性和可靠性。该模型可为数控回转工作台伺服进给系统设计、伺服控制方法研究及故障诊断等工作提供理论依据。

Abstract

To reveal the dynamic characteristics of worktable axle of CNC gear hobbing machine due to interrupted cutting

the servo control system of the worktable is analyzed. According to electromechanical principle and mechanical dynamic principle

every component model of the servo control system is constructed to derive an overall servo control system model of the rotary table. Considering the nonlinear Stribeck friction factor

a simulation model of the worktable servo system is established by Simulink. The effects of different position and speed command frequency variation on the dynamic response of the workpiece axis servo system are discussed and the servo dynamic characteristics reflecting the location and speed of the worktable axle are obtained. When the servo system of the rotary table runs at low speed

the “flat top” exists in the position tracking

and the “dead zone” exists in the speed tracking. The position and speed following rate of the servo system of the rotary worktable decrease with the increasing given command frequency

especially when the instruction frequency increases to 31 Hz

the following rate is less than 10%. The model accuracy is verified by online test of the worktable

the experimental response curves coincide with the simulated ones well at the same command frequency.

关键词

Keywords

references

YU C J, HUANG X D, FANG C G. Research on dynamic characteristics of NC rotary table considering leakage factors of its hydrostatic guideway [J]. Proceedings of the Institution of Mechanical Engineers: Part C Journal of Mechanical Engineering Science, 2012, 226(C11): 2674-2685.

王时龙, 杨永, 周杰, 等. 大型数控滚齿机热误差补偿建模 [J]. 中南大学学报(自然科学版), 2011, 42(10): 3066-3072.

WANG Shilong, YANG Yong, ZHOU Jie, et al. Modeling of thermal error compensation of large-scale numerical control gear hobbing machine [J]. Journal of Central South University(Science and Technology), 2011, 42(10): 3066-3072.

YOUNKIN G W. Modeling machine tool feed servo drives using simulation techniques to predict performance [J]. IEEE Transactions on Industry Applications, 1991, 27(2): 268-274.

梅雪松, 陶涛, 堤正臣, 等. 高速、高精度数控伺服工作台摩擦误差研究 [J]. 机械工程学报, 2001, 37(6): 76-81.

MEI Xuesong, TAO Tao, DI Zhengchen, et al. Study of the friction error for high-speed high precision table [J]. Chinese Journal of Mechanical Engineering, 2001, 37(6): 76-81.

陈光胜, 梅雪松, 陶涛. X-Y工作台摩擦误差补偿方法的研究 [J]. 西安交通大学学报, 2011, 45(1): 69-73.

CHEN Guangsheng, MEI Xuesong, TAO Tao. Compensation of friction error for X-Y table [J]. Journal of Xi'an Jiaotong University, 2011, 45(1): 69-73.

KIM M S, CHUNG S C. Integrated design methodology of ball-screw driven servomechanisms with discrete controllers: part I Modeling and performance analysis [J]. Mechatronics, 2006, 16(8): 491-502.

PANDILOV Z, MILECKI A, NOWAK A, et al. Virtual modelling and simulation of a CNC machine feed drive system [J]. Transactions of FAMENA, 2016, 39(4): 37-54.

PANDILOV Z, VLADIMIR D. Analytical determination of the CNC machines high-speed feed drives position loop gain [J]. Applied Mechanics and Materials, 2015, 555: 505-510.

ERKORKMAZ K, ALTINTAS Y. High speed CNC system design: part III High speed tracking and contouring control of feed drives [J]. International Journal of Machine Tools Manufacture, 2001, 41(11): 1637-1658.

KAMAT S, JUNNURI R K. Model predictive control approaches for permanent magnet synchronous motor in virtual environment [C]∥2016 IEEE ICPEICES. Piscataway, NJ, USA: IEEE, 2016: 4581-4592.

宫玉琳. 永磁同步电动机伺服系统自适应逆控制策略研究 [D]. 长春: 长春理工大学, 2013: 10-27.

陶涛. 高速高精度运动控制器的研究 [D]. 西安: 西安交通大学, 2005: 39-61.

MORA A, ORELLANA A, JULIET J. Model predictive torque control for torque ripple compensation in variable-speed PMSMs [J]. IEEE Transactions on Industrial Electronics, 2016, 63(7): 4584-4592.

孙环阳, 黄筱调, 洪荣晶, 等. 永磁同步电机矢量控制系统的仿真研究 [J]. 机械设计与制造, 2010(3): 122-124.

SUN Huanyang, HUANG Xiaotiao, HONG Rongjing, et al. Simulation research on vector control system of permanent magnet synchronous motor [J]. Machinery Design Manufacture, 2010(3): 122-124.

FUENTES E J, SILVA C A, YUZ J I. Predictive speed control of a two-mass system driven by a permanent magnet synchronous motor [J]. IEEE Transactions on Industrial Electronics, 2012, 59(7): 2840-2848.

LUKICHEV D V, DEMIDOVA G L. PID-type fuzzy adaptive control for two-mass servo-drive system: Design, simulation and experiment [C]∥International Conference on Power Drives Systems(ICPDS). Piscataway, NJ, USA: IEEE, 2016: 1-5.

冯斌, 梅雪松, 杨军, 等. 数控机床摩擦误差自适应补偿方法研究 [J]. 西安交通大学学报, 2013, 47(11): 65-70.

FENG Bin, MEI Xuesong, YANG Jun, et al. Adaptive compensation of friction error for numerical control [J]. Journal of Xi'an Jiaotong University, 2013, 47(11): 65-70.

WANG Shuang, FU Junyong, YANG Ying. An improved predictive functional control with minimum-order observer for speed control of permanent magnet synchronous motor [J]. Journal of Electrical Engineering Technology, 2017, 12: 272-283.

MARTON L, LANTOS B. Modeling, identification and compensation of stick-slip friction [J]. IEEE Transactions on Industrial Electronics, 2007, 54(1): 511-515.

刘星,梅雪松,陶涛,等.一种零耦合滚齿全误差模型及其预测方法.2016,50(10):42-48.[doi:10.7652/xjtuxb201610 007]

韩振华,石万凯,肖洋轶,等.新型复合摆线外啮合圆柱齿轮副的传动特性分析.2016,50(9):10-19.[doi:10.7652/xjtuxb 201609002]

李应刚,陈天宁,王小鹏,等.外部动态激励作用下齿轮系统非线性动力学特性.2014,48(1):101-105.[doi:10.7652/xjtuxb201401017]

申建广,陶涛,梅雪松,等.一种任意比率电子齿轮分频器的实现方法.2014,48(1):96-100.[doi:10.7652/xjtuxb201401 016]

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

采用试验设计方法的第三代CO2气体箔轴承箔片几何参数敏感性分析

350 MW级先进绝热压缩空气储能系统动态特性研究

350 MW超灵活锅炉深度调峰下水冷壁流动不稳定性及动态特性分析

氦/氙混合比例对布雷顿循环系统动态特性的影响分析

350 MW级先进绝热压缩空气储能系统动态特性研究