拉刀螺旋前刀面刃磨砂轮安装姿态计算方法

贾康; 洪军; 万少可; 荆冲

doi:10.7652/xjtuxb201702019

您当前的位置：

首页 >

文章列表页 >

拉刀螺旋前刀面刃磨砂轮安装姿态计算方法

更新时间：2025-07-09

- 拉刀螺旋前刀面刃磨砂轮安装姿态计算方法
- Wheel Orientation Calculation for Helical Rake Flank Sharpening of Broaching Tool
- 西安交通大学学报 2017年51卷第2期页码：121-127
- 作者机构：
  
  西安交通大学机械制造系统工程国家重点实验室,西安,710049
- 作者简介：
- 基金信息：
  
  : 2016-09-13。作者简介: 贾康(1987—),男,博士生;洪军(通信作者),男,教授,博士生导师。基金项目: 国家科技重大专项资助项目(2015ZX04014021)
- DOI：10.7652/xjtuxb201702019
  中图分类号： TH164
- 网络首发：2017-02-10，
  
  纸质出版：2017
- 稿件说明：
移动端阅览
贾康, 洪军, 万少可, 等. 拉刀螺旋前刀面刃磨砂轮安装姿态计算方法[J]. 西安交通大学学报, 2017,51(2):121-127.

Wheel Orientation Calculation for Helical Rake Flank Sharpening of Broaching Tool[J]. 2017, 51(2): 121-127.
贾康, 洪军, 万少可, 等. 拉刀螺旋前刀面刃磨砂轮安装姿态计算方法[J]. 西安交通大学学报, 2017,51(2):121-127. DOI： 10.7652/xjtuxb201702019.

Wheel Orientation Calculation for Helical Rake Flank Sharpening of Broaching Tool[J]. 2017, 51(2): 121-127. DOI： 10.7652/xjtuxb201702019.

摘要

为了精确地对拉刀螺旋前刀面进行刃磨并保证良好的加工质量

提出了一种砂轮安装位置及姿态的计算方法。该算法通过空间包络原理计算砂轮磨削接触线

并给出接触线分布位置约束

以两个接触点进行前角定义

从而将满足磨削工艺要求的砂轮安装位置和姿态求解转换为一个非线性方程。然后

根据前刀面螺旋角分布规律指出

砂轮的安装摆角应远离前刀面对应的螺旋角范围

从而将该非线性方程转换为两个单变量的搜索问题

通过牛顿-拉夫逊等方法实现快速求解。研究结果表明

较大的砂轮尺寸或砂轮安装摆角对应较大的砂轮安装倾角

因此建议采用贴近前刀面螺旋角的砂轮安装摆角以回避刃磨中砂轮与前一切削齿之间的干涉。基于VERICUT的仿真结果证明

该方法计算出的砂轮安装位置与姿态能够保证螺旋前刀面得到准确磨削。

Abstract

To achieve accuracy of rake angle and ensure the grinding quality of the rake flanks of broaching tools

a novel wheel orientation and position calculating method is proposed

the contact curve is identified following the enveloping theory

and its distribution constraints are obtained. Defining the rake angle by two contact points

the wheel orientation evaluation is transformed into a nonlinear equation

which is further resolved as two single-variable searching problems obeying the principle that the swing angle of the grinding wheel ought to depart away the helix angle. Thus this equation can be easily solved by Newton-Raphson method. The results indicate that either larger radius or larger swing angle of the wheel corresponds with a larger tilt angle

and a swing angle close to the helix angle of rake flank is suggested to avoid the interference between the grinding wheel and front cutting teeth. A VERCUT based simulation verifies that the wheel orientation and position from this proposed method can ensure grinding precision of the helical rake flank of broaching tool.

关键词

Keywords

references

袁哲俊, 刘华明. 金属切削刀具设计手册: 拉刀 [M]. 北京, 机械工业出版社, 2009: 139-141.

吴道泉. 铣刀周齿螺旋前刀面的刃磨 [J]. 常州工业大学学报(自然科学版), 2003, 32(3): 15-21.

WU Daoquan. How to sharpen the helix front of the mill cylindrical tooth [J]. Journal of Changzhou University of Technology(Natural Science Edition), 2003, 32(3): 15-21.

郭非, 王启义, 雷为民. 螺旋刃刀具前刀面数控磨削工艺及刀位计算 [J]. 中国机械工程, 1999, 10(1): 10-11, 33.

GUO Fei, WANG Qiyi, LEI Weimin. CNC grinding process analysis and path generation for the rake face of helical curve cutters [J]. Chinese Mechanical Engineering, 1999, 10(1): 10-11, 33.

EHMANN K F, DE VRIES M F. Grinding wheel profile definition for the manufacture of drill flutes [J]. CIRP Ann: Manuf Technol, 1990, 39(1): 153-156.

SHETH D S, MALKIN S. CAD/CAM for geometry and process analysis of helical groove machining [J]. CIRP Ann: Manuf Technol, 1990, 39(1): 129-132.

KANG S K, EHMANN K F, LIN C. A CAD approach to helical groove machining: I Mathematical model and model solution [J]. International Journal of Machine Tools Manufacture, 1996, 36(1): 141-153.

ZHANG W, WANG X, HE F, et al. A practical method of modelling and simulation for drill fluting [J]. Int J Mach Tools Manuf, 2006, 46(6): 667-672.

NGUYEN V H, KO S L. Determination of workpiece profile and influence of singular point in helical grooving [J]. CIRP Annals: Manufacturing Technology, 2013, 62: 323-326.

XIAO S, WANG L, CHEN Z C, et al. A new and accurate mathematical model for computer numerically controlled programming of 4Y1 wheels in 21/2-axis flute grinding of cylindrical end-mills [J]. Journal of Manufacturing Science Engineering, 2013, 135: 41008.

KALDOR S, RAFAEL A M, MESSINGER D. On the CAD of profiles for cutters and helical flutes-geometrical aspects [J]. CIRP Annals: Manufacturing Technology, 1988, 37(1): 53-56

KO S L. Geometrical analysis of helical flute grinding and application to end mill [J]. Transactions of NAMRI/SME, 1994, 22: 165-172.

PUIG A, PEREZ-VIDAL L, TOST D. 3D simulation of tool machining [J]. Computers and Graphics, 2003, 27(1): 99-106.

LI G, SUN J, LI J. Modeling and analysis of helical groove grinding in end mill machining [J]. J Mater Process Technol, 2014, 214: 3067-3076.

KARPUSCHEWSKI B, JANDECKA K, MOUREK D. Automatic search for wheel position in flute grinding of cutting tools [J]. CIRP Annals: Manufacturing Technology, 2011, 60(1): 347-350.

RABABAH M M, CHEN Z C. An automated and accurate CNC programming approach to five-axis flute grinding of cylindrical end-mills using the direct method [J]. Journal of Manufacturing Science Engineering, 2013, 135(1): 228-229.

REN Lei, WANG Shilong, YI Lili, et al. An accurate method for five-axis flute grinding in cylindrical end-mills using standard 1V1/1A1 grinding wheels [J]. Precision Engineering, 2016, 43: 387-39.

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

混合电解槽阵列协同的风光耦合制氢系统双层多目标优化

结构-语义-残差协同的图像压缩框架：面向隐私保护与高保真重建

水蒸气掺混对氨裂解气旋流燃烧与排放特性的影响研究

冷库水平空气幕热湿阻隔性能数值模拟研究

融合物理信息与深度算子网络的变压器绕组热-流场快速计算方法