结合面切向接触等效黏性阻尼分形模型

温淑花; 张学良; 陈永会; 兰国生; 李齐; 王开威

doi:10.7652/xjtuxb201701001

您当前的位置：

首页 >

文章列表页 >

结合面切向接触等效黏性阻尼分形模型

更新时间：2025-07-09

- 结合面切向接触等效黏性阻尼分形模型
- Fractal Model of Equivalent Viscous Damping for Tangential Contact in Joint Interfaces
- 西安交通大学学报 2017年51卷第1期页码：1-8+50
- 作者机构：
  
  太原科技大学机械工程学院,太原,030024
- 作者简介：
- 基金信息：
  
  : 2016-05-02。作者简介: 温淑花(1963—),女,教授。基金项目: 国家自然科学基金资助项目(51275328);山西省自然科学基金资助项目(201601D011062)
- DOI：10.7652/xjtuxb201701001
  中图分类号： TH113.1
- 网络首发：2017-01-10，
  
  纸质出版：2017
- 稿件说明：
移动端阅览
温淑花, 张学良, 陈永会, 等. 结合面切向接触等效黏性阻尼分形模型[J]. 西安交通大学学报, 2017,51(1):1-8+50.

Fractal Model of Equivalent Viscous Damping for Tangential Contact in Joint Interfaces[J]. 2017, 51(1): 1-8+50.
温淑花, 张学良, 陈永会, 等. 结合面切向接触等效黏性阻尼分形模型[J]. 西安交通大学学报, 2017,51(1):1-8+50. DOI： 10.7652/xjtuxb201701001.

Fractal Model of Equivalent Viscous Damping for Tangential Contact in Joint Interfaces[J]. 2017, 51(1): 1-8+50. DOI： 10.7652/xjtuxb201701001.

摘要

基于MB接触分形理论、结合面切向接触阻尼耗能机理以及阻尼损耗因子的定义

建立了结合面切向接触等效黏性阻尼的分形模型及其损耗因子模型。所建模型表明

结合面切向接触等效黏性阻尼与结合面法向接触载荷、摩擦系数、材料塑性指数、结合面上的切向动态载荷幅值与法向接触载荷之比(简称切法向载荷比)、结合面分形维数以及分形粗糙度参数之间具有复杂的非线性关系

而结合面切向接触阻尼损耗因子与结合面分形维数和分形粗糙度参数无关

仅与切法向载荷比和摩擦系数有关。模型的仿真结果表明

结合面切向接触阻尼损耗因子随着切法向载荷比的增大而增大

随结合面摩擦系数的增大而减小; 结合面切向接触等效黏性阻尼随着结合面法向接触载荷、摩擦系数、材料塑性指数的增大而增大

随着结合面分形粗糙度的增大而减小; 结合面切向接触等效黏性阻尼随结合面分形维数的变化规律较为复杂

先随着分形维数的增大而增大

在分形维数值1.65附近出现最大值

而后随着分形维数的增大而减小。

Abstract

Based on the MB contact fractal theory and the mechanism of energy dissipation of tangential contact damping in joint interfaces as well as the definition of damping energy dissipation factor

the fractal model of equivalent viscous damping for tangential contact in joint interfaces and its energy dissipation factor model are proposed. It is shown from the models that there exist complex nonlinear relationships between the equivalent viscous damping of tangential contact in joint interfaces and such factors as the normal contact load

the friction coefficient

the plastic index of contact materials

the ratio of the tangential dynamic load amplitude to normal contact load(named tangential-normal load ratio for short)

the fractal dimension

and the fractal roughness of joint interfaces. However

the energy dissipation factor of tangential contact damping is independent of the fractal dimension and fractal roughness

but only depends on the tangential-normal load ratio. Numerical simulations of the models show that the energy dissipation factor increases with the tangential-normal load ratio

but decreases with the friction coefficient of joint interfaces. The tangential contact equivalent viscous damping of joint interfaces increases with the normal contact load

the friction coefficient

and the plastic index of contact materials

but decreases with the fractal roughness. The variation rule of equivalent viscous damping with the fractal dimension is very complex: firstly it increases with the fractal dimension

and approaches a max value when the fractal dimension is equal to 1.65 or so

then decreases with the fractal dimension.

关键词

Keywords

references

张学良. 机械结合面动态特性及应用 [M]. 北京: 中国科学技术出版社, 2002: 1-2.

戴德沛. 阻尼减振降噪技术 [M]. 西安: 西安交通大学出版社, 1986: 11, 234.

张学良, 黄玉美, 温淑花. 结合面接触刚度分形模型研究 [J]. 农业机械学报, 2000, 31(4): 89-91.

ZHANG Xueliang, HUANG Yumei, WEN Shuhua. Fractal model of contact stiffness of joint surfaces [J]. Transactions of the Chinese Society for Agricultural Machinery, 2000, 31(4): 89-91.

张学良, 温淑花, 徐格宁, 等. 结合部切向接触刚度分形模型研究 [J]. 应用力学学报, 2003, 20(1): 70-72.

ZHANG Xueliang, WEN Shuhua, XU Gening, et al. Fractal model of the tangential contact stiffness of machined surfaces in contact [J]. Chinese Journal of Applied Mechanics, 2003, 20(1): 70-72.

温淑花, 张学良, 武美先, 等. 结合面法向接触刚度分形模型建立与仿真 [J]. 农业机械学报, 2009, 40(11): 197-202.

WEN Shuhua, ZHANG Xueliang, WU Meixian, et al. Fractal model and simulation of normal contact stiffness of joint interfaces and its simulation [J]. Transactions of the Chinese Society for Agricultural Machinery, 2009, 40(11): 197-202.

温淑花, 张学良, 武美先, 等. 结合面切向接触刚度分形模型及其仿真 [J]. 农业机械学报, 2009, 40(12): 223-227.

WEN Shuhua, ZHANG Xueliang, WU Meixian, et al. Fractal model of tangential contact stiffness of joint interfaces and its simulation [J]. Transactions of the Chinese Society for Agricultural Machinery, 2009, 40(12): 223-227.

张学良, 温淑花, 兰国生, 等. 平面结合面切向接触阻尼分形模型及其仿真 [J]. 西安交通大学报, 2011, 45(5): 74-77, 136.

ZHANG Xueliang, WEN Shuhua, LAN Guosheng, et al. Fractal model for tangential contact damping of plane joint interfaces with simulation [J]. Journal of Xi'an Jiaotong University, 2011, 45(5): 74-77.

尤晋闽, 陈天宁. 结合面法向动态参数的分形模型 [J]. 西安交通大学学报, 2009, 43(9): 91-94.

YOU Jinmin, CHEN Tianning. Fractal model for normal dynamic parameters of joint surfaces [J]. Journal of Xi'an Jiaotong University, 2009, 43(9): 91-94.

尤晋闽, 陈天宁. 基于分形接触理论的结合面法向接触参数预估 [J]. 上海交通大学学报, 2011, 45(9): 1275-1280.

YOU Jinmin, CHEN Tianning. Estimation for normal parameters of joint surfaces based on fractal theory [J]. Journal of Shanghai Jiaotong University, 2011, 45(9): 1275-1280.

张学良, 丁红钦, 兰国生, 等. 基于分形理论的结合面法向接触阻尼与损耗因子模型 [J]. 农业机械学报, 2013, 44(6): 287-294.

ZHANG Xueliang, DING Hongqin, LAN Guosheng, et al. Normal contact damping and dissipation factor model of joint interfaces based on fractal theory [J]. Transactions of the Chinese Society for Agricultural Machinery, 2009, 40(12): 223-227.

李小彭, 王伟, 赵米鹊, 等. 考虑摩擦因素影响的结合面切向接触阻尼分形预估模型及其仿真 [J]. 机械工程学报, 2012, 48(23): 46-50.

LI Xiaopeng, WANG Wei, ZHAO Mique, et al. Fractal prediction model for tangential contact damping of joint surface considering friction factors and its simulation [J]. Journal of Mechanical Engineering, 2012, 48(23): 46-50.

张学良, 王南山, 温淑花, 等. 机械结合面切向接触阻尼能量耗散弹塑性分形模型 [J]. 机械工程学报, 2013, 49(12): 43-49.

ZHANG Xueliang, WANG Nanshan, WEN Shuhua, et al. Elastoplastic fractal model for tangential contact damping energy dissipation of machine joint interfaces [J]. Journal of Mechanical Engineering, 2013, 49(12): 43-49.

ZHANG Xueliang, WANG Nanshan, LAN Guosheng, et al. Tangential damping and its dissipation factor models of joint interfaces based on fractal theory with simulations [J]. ASME Journal of Tribology, 2014, 136(1): 011704.

WANG S, KOMVOPOULOS K. A fractal theory of the interracial temperature distribution in the slow sliding regime: part I Elastic contact and heat transfer analysis [J]. ASME Journal of Tribology, 1994, 116(4): 812-823.

田红亮, 方子帆, 朱大林, 等. 固定接触界面切向静弹性刚度问题研究 [J]. 应用力学学报, 2011, 28(5): 458-464.

TIAN Hongliang, FANG Zifan, ZHU Dalin, et al. Investigation on tangential static elastic stiffness of fixed contact interface [J]. Chinese Journal of Applied Mechanics, 2011, 28(5): 458-464.

JOHNSON K L. Contact mechanics [M]. Cambridge, UK: Cambridge University Press, 1985: 227.

温淑花, 张宗阳, 张学良, 等. 固定结合面刚度分形模型 [J]. 农业机械学报, 2013, 44(2): 255-260.

WEN Shuhua, ZHANG Zongyang, ZHANG Xueliang, et al. Stiffness fractal model for fixed joint interfaces [J]. Transactions of the Chinese Society for Agricultural Machinery, 2013, 44(2): 255-260.

LIOU J L. The theoretical study for microcontact model with variable topography parameters [D]. Taiwan: Cheng Kung University, 2006: 97.

BHUSHAN B. Analysis of the real area of contact between a polymeric magnetic medium and a rigid surface [J]. ASME Journal of Tribology, 1984, 106(1): 26-34.

田红亮,余媛,陈甜敏,等.考虑表面粗糙度和几何曲率的两球体接触问题.2016,50(3):1-7.[doi:10.7652/xjtuxb2016 03001]

刘伟强,张进华,洪军,等.椭圆抛物体形微凸体弹性接触力学模型.2015,49(10):34-40.[doi:10.7652/xjtuxb201510 006]

王磊,杜瑞,金涛,等.螺钉连接固定结合面匹配设计研究.2013,47(7):62-67.[doi:10.7652/xjtuxb201307012]

杜飞,洪军,李宝童,等.结合面参数的超声检测方法研究.2013,47(3):18-23.[doi:10.7652/xjtuxb201303004]

杨国庆,熊美华,洪军,等.3D粗糙表面的数字化表征与接触特性分析.2012,46(11):58-63.[doi:10.7652/xjtuxb201211 012]

杨国庆,王飞,洪军,等.螺栓被连接件刚度理论的计算方法.2012,46(7):50-56.[doi:10.7652/xjtuxb201207010]

陈成军,杨国庆,常东方,等.面向结合面密封性能要求的装配连接工艺设计.2012,46(3):75-83.[doi:10.7652/xjtuxb 201203014]

李辉光,刘恒,虞烈.粗糙机械结合面的接触刚度研究.2011,45(6):69-74.[doi:10.7652/xjtuxb201106013]

张学良,温淑花,兰国生,等.平面结合面切向接触阻尼分形模型及其仿真.2011,45(5):74-77.[doi:10.7652/xjtuxb 201105014]

刘海涛,赵万华.基于结合面的机床摄动分析及优化设计.2010,44(1):96-99.[doi:10.7652/xjtuxb201001021]

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

结合面法向动态参数的分形模型

基于结合面的机床摄动分析及优化设计

平面结合面切向接触阻尼分形模型及其仿真

纤维多孔金属的流阻率分形模型研究

考虑表面粗糙度和几何曲率的两球体接触问题