考虑边缘接触的弧齿锥齿轮有限元接触分析

侯祥颖; 方宗德

doi:10.7652/xjtuxb201611011

您当前的位置：

首页 >

文章列表页 >

考虑边缘接触的弧齿锥齿轮有限元接触分析

更新时间：2025-07-09

- 考虑边缘接触的弧齿锥齿轮有限元接触分析
- Tooth Contact Analysis of Spiral Bevel Gears Considering Edge Contact with Finite Element Method
- 西安交通大学学报 2016年50卷第11期页码：69-74
- 作者机构：
  
  西北工业大学机电学院,西安,710072
- 作者简介：
- 基金信息：
  
  : 2016-04-05。作者简介: 侯祥颖(1990—),男,博士生;方宗德(通信作者),男,教授。基金项目: 国家自然科学基金资助项目(51175423,51375384)
- DOI：10.7652/xjtuxb201611011
  中图分类号： TH132.41
- 网络首发：2016-11-10，
  
  纸质出版：2016
- 稿件说明：
移动端阅览
侯祥颖, 方宗德. 考虑边缘接触的弧齿锥齿轮有限元接触分析[J]. 西安交通大学学报, 2016,50(11):69-74.

Tooth Contact Analysis of Spiral Bevel Gears Considering Edge Contact with Finite Element Method[J]. 2016, 50(11): 69-74.
侯祥颖, 方宗德. 考虑边缘接触的弧齿锥齿轮有限元接触分析[J]. 西安交通大学学报, 2016,50(11):69-74. DOI： 10.7652/xjtuxb201611011.

Tooth Contact Analysis of Spiral Bevel Gears Considering Edge Contact with Finite Element Method[J]. 2016, 50(11): 69-74. DOI： 10.7652/xjtuxb201611011.

摘要

针对弧齿锥齿轮轻质重载的特点

利用有限元方法的批处理功能进行了考虑边缘接触的轮齿接触分析

定量讨论了边缘接触随载荷增加时的变化规律。根据考虑边缘接触的几何接触分析

将齿轮从进入啮合到退出啮合分成若干步进行计算

每一步的计算结果连接起来用于描述整个啮合的过程。以一对弧齿锥齿轮为例

经过不同载荷条件下考虑边缘接触的定量分析

提取出接触应力、接触印痕、接触路径

并与几何接触分析和承载接触分析结果进行了对比

三者吻合度较好。对比结果证明

通过有限元法分析可以较精确地确定齿轮发生边缘接触时的载荷临界值及边缘接触位置

得出边缘接触会导致接触应力急剧增大、接触路径延长、接触区域面积变大的结果

通过定量计算、比较各项参数指标得出变化规律。

Abstract

According to the lightweight and heavily loaded characteristics of spiral bevel gear

spiral bevel gears with tooth edge contact were analyzed by finite element processing batch

and the change regulation of tooth edge contact as load increases was quantitatively discussed. On the basis of tooth contact analysis

gear meshing processions were divided into several steps to calculate. Each step was combined to describe the gear meshing processions. Taking a pair of spiral bevel gears as an example

tooth edge contact is analyzed under different load conditions. The contact stress

contact pattern and contact trajectory were obtained by post-treatment

which well coincide with tooth contact analysis and loaded tooth contact analysis. The result shows that three tooth edge contact parameters listed above steeply rise as loads passing beyond the critical value. And the change characteristics can be obtained by quantitative calculation and parameter comparison.

关键词

Keywords

references

高建平, 方宗德, 杨宏斌. 螺旋锥齿轮边缘接触分析 [J]. 航空动力学报, 1998, 13(3): 289-292.

GAO Jianping, FANG Zongde, YANG Hongbin. Analysis of edge contact for hypoid gear and spiral bevel gears [J]. Journal of Aerospace Power, 1998, 13(3): 289-292.

方宗德, 邓效忠, 任东锋. 考虑边缘接触的弧齿锥齿轮承载接触分析 [J]. 机械工程学报, 2002, 38(9): 69-72.

FANG Zongde, DENG Xiaozhong, REN Dongfeng. Loaded tooth contact analysis of spiral bevel gears considering edge contact [J]. Journal of Mechanical Engineering, 2002, 38(9): 69-72.

RODA-CASANOVA V, SANCHEZ-MARIN F T, GONZALEZ-PEREZ I, et al. Determination of the ISO face load factor in spur gear drives by the finite element modeling of gears and shafts [J]. Mechanism and Machine Theory, 2013, 65: 1-13.

WANG Pei-yu, FAN Sih-ci, HUANG Zi-gui. Spiral bevel gear dynamic contact and tooth impact analysis [J]. Journal of Mechanical Design, 2011, 133(8): 084501.

WANG Huanmei, TANG Yingshi, GONG Yongliang. Accurately parameterization modeling and thermo-mechanical coupling analysis of spiral bevel gears of reducer [J]. Applied Mechanics and Materials, 2012, 184/185: 37-40.

MERMOZ E, ASTOUL J, SARTOR M, et al. A new methodology to optimize spiral bevel gear topography [J]. CIRP Annals: Manufacturing Technology, 2013, 62(1): 119-122.

唐进元, 蒲太平. 基于有限元法的螺旋锥齿轮啮合刚度计算 [J]. 机械工程学报, 2011, 47(11): 23-29.

TANG Jinyuan, PU Taiping. Spiral bevel gear meshing stiffness calculations based on the finite element method [J]. Journal of Mechanical Engineering, 2011, 47(11): 23-29.

唐进元, 彭方进. 准双曲面齿轮动态啮合性能的有限元分析研究 [J]. 振动与冲击, 2011, 30(7): 101-106.

TANG Jinyuan, PENG Fangjin. Finite element analysis for dynamic meshing of a pair of hypoid gears [J]. Journal of Vibration and Shock, 2011, 30(7): 101-106.

CHEN Y C, LO C C. Contact stress and transmission errors under load of a modified curvilinear gear set based on finite element analysis [J]. Proceedings of the Institution of Mechanical Engineers: Part C Journal of Mechanical Engineering Science, 2015, 229(2): 191-204.

LITVIN F L, FUENTES A, HAYASAKA K. Design, manufacture, stress analysis, and experimental tests of low-noise high endurance spiral bevel gears [J]. Mechanism and Machine Theory, 2006, 41(1): 83-118.

WU R Y. Analysis on contact stress after gear meshing and finite element of stiffness [J]. Applied Mechanics and Materials, 2015, 716: 670-675.

FUENTES A, RUIZ-ORZAEZ R, GONZALEZ-PEREZ I. Computerized design, simulation of meshing, and finite element analysis of two types of geometry of curvilinear cylindrical gears [J]. Computer Methods in Applied Mechanics Engineering, 2014, 272(2): 321-339.

LITVIN F L, GONZALEZ-PEREZ I, FUENTES A, et al. Design, generation and stress analysis of face-gear drive with helical pinion [J]. Computer Methods in Applied Mechanics Engineering, 2005, 194(36/37/38): 3870-3901.

侯祥颖, 方宗德, 邓效忠, 等. 弧齿锥齿轮有限元建模与接触分析 [J]. 哈尔滨工程大学学报, 2015, 36(6): 826-830.

HOU Xiangying, FANG Zongde, DENG Xiaozhong, et al. Contact analysis of spiral bevel gears based on finite element model [J]. Journal of Harbin Engineering University, 2015, 36(6): 826-830.

方宗德. 齿轮轮齿承载接触分析(LTCA)的模型和方法 [J]. 机械传动, 1998, 22(2): 1-3.

FANG Zongde. Model and approach for loaded tooth contact analysis(LTCA)of gear drives [J]. Journal of Mechanical Transmission, 1998, 22(2): 1-3.

LITVIN F L, FUENTES A. Gear geometry and applied theory [M]. Cambridge, UK: Cambridge University Press, 2004: 627-676.

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

弧齿锥齿轮的向量式有限元静态啮合分析

液固高速撞击时材料表面损伤的数值模拟

用于跨/超声速壁板颤振精确分析的流-固耦合有限元算法

航空发动机风扇叶片振动特性分析

离心力影响下的高速主轴-拉杆系统动态特性