一种求解含围带阻尼成圈叶片振动响应的高效方法

邱恒斌 1; 徐自力 1; 刘雅琳 2; 上官博 3

doi:10.7652/xjtuxb201611001

您当前的位置：

首页 >

文章列表页 >

一种求解含围带阻尼成圈叶片振动响应的高效方法

更新时间：2025-07-09

- 一种求解含围带阻尼成圈叶片振动响应的高效方法
- An Efficient Method for Solving Vibration Response of Continuous Covered Blades with Damped Shroud
- 西安交通大学学报 2016年50卷第11期页码：1-6
- 作者机构：
  
  西安交通大学机械结构强度与振动国家重点实验室,西安,710049
- 作者简介：
- 基金信息：
  
  : 2016-04-07。作者简介: 邱恒斌(1991—),男,硕士生;徐自力(通信作者),男,教授。基金项目: 国家自然科学基金资助项目(51275385)
- DOI：10.7652/xjtuxb201611001
  中图分类号： TK263.3
- 网络首发：2016-11-10，
  
  纸质出版：2016
- 稿件说明：
移动端阅览
邱恒斌 1, 徐自力 1, 刘雅琳 2, 等. 一种求解含围带阻尼成圈叶片振动响应的高效方法[J]. 西安交通大学学报, 2016,50(11):1-6.

An Efficient Method for Solving Vibration Response of Continuous Covered Blades with Damped Shroud[J]. 2016, 50(11): 1-6.
邱恒斌 1, 徐自力 1, 刘雅琳 2, 等. 一种求解含围带阻尼成圈叶片振动响应的高效方法[J]. 西安交通大学学报, 2016,50(11):1-6. DOI： 10.7652/xjtuxb201611001.

An Efficient Method for Solving Vibration Response of Continuous Covered Blades with Damped Shroud[J]. 2016, 50(11): 1-6. DOI： 10.7652/xjtuxb201611001.

摘要

针对含围带阻尼成圈叶片的非线性振动响应计算时自由度多、迭代求解计算量大的问题

综合波传动法、高阶谐波平衡法及Receptance法推导了一种求解含围带阻尼成圈叶片振动响应的高效方法。根据成圈叶片结构周期对称的特点

采用波传动法

将含围带阻尼成圈叶片降阶为一个基本扇区进行振动分析

接触面的非线性摩擦力可由单个扇区的位移结合干摩擦模型求得; 将降阶后单个扇区的时域振动微分方程由高阶谐波平衡法转化为频域代数方程

通过叶片正则振型的正交性对频域的振动方程进行解耦

并利用叶片局部非线性的特点对非接触面上的线性自由度进一步缩聚

从而减少非线性迭代的规模

提高计算效率。算例结果表明:采用所提求解方法的响应计算结果与采用整体模型的结果相差小于0.33%

计算时间缩短为原来的10%

验证了该方法的正确性、高效性

同时采用该方法研究了真实围带阻尼叶片的非线性振动响应。

Abstract

An efficient solution method based on wave propagation method

multi-harmonic balance method and Receptance method was developed to solve the problem with overlarge degrees of freedom and computational complexity in calculating the nonlinear vibration response of continuous covered blades with damped shroud. According to the cyclic symmetry property of blade

the vibration analysis of a whole blade can be reduced to one of its basic sector using wave propagation method and the nonlinear friction force can be solved from the displacement of the basic sector and friction contact model; the differential equations in time domain of the reduced basic sector can be transformed into algebraic equations in frequency domain by multi-harmonic balance method. The orthogonality of normalized modes is used to decouple the vibration equation of blade in frequency domain and the local nonlinear characteristics of the blade system are used to condense the linear DOFs in non-contact interfaces. So that the scale of nonlinear iteration can be effectively reduced and the computation efficiency is improved. The results showed that the relative error obtained with the developed method was 0.33% and the calculation time was reduced to 10%

which verifies the accuracy and efficiency of the proposed method. The nonlinear vibration response of a real shrouded blade was investigated by this method.

关键词

Keywords

references

谷伟伟, 徐自力. 干摩擦阻尼叶片的界面约束力描述及振动响应求解 [J]. 振动工程学报, 2012, 25(1): 64-67.

GU Weiwei, XU Zili. Description of constraint force for dry friction and prediction of vibration responses on damped blade [J]. Journal of Vibration Engineering, 2012, 25(1): 64-67.

史亚杰, 单颖春, 朱梓根. 带凸肩叶片非线性振动响应分析 [J]. 航空动力学报, 2009, 24(5): 1158-1165.

SHI Yajie, SHAN Yingchun, ZHU Zigen. Analysis of nonlinear response of shrouded blades system [J]. Journal of Aerospace Power, 2009, 24(5): 1158-1165.

PANNING L, SEXTRO W, POPP K. Optimization of the contact geometry between turbine blades and underplatform dampers with respect to friction damping [C] ∥Proceedings of ASME Turbo Expo 2010: Power for Land, Sea and Air. New York, USA: ASME, 2002: 991-1007.

KURAN B, ÖZGÜVEN H N. A modal superposition method for non-linear structures [J]. Journal of Sound and Vibration, 1996, 189(3): 315-339.

CIAGˇUEROAGˇULU E, ÖZGÜVEN H N. Nonlinear vibration analysis of bladed disks with dry friction dampers [J]. Journal of Sound and Vibration, 2006, 295(3): 1028-1043.

PETROV E P. A method for use of cyclic symmetry properties in analysis of nonlinear multiharmonic vibrations of bladed disks [J]. ASME Journal of Turbomachinery, 2004, 126(1): 175-183.

THOMAS D L. Dynamics of rotationally periodic structures [J]. International Journal for Numerical Methods in Engineering, 1979, 14(1): 81-102.

谢永慧, 张荻. 汽轮机阻尼围带长叶片振动特性研究 [J]. 中国电机工程学报, 2005, 25(18): 96-90.

XIE Yonghui, ZHANG Di. Numerical model for vibration characteristic of steam turbine blade with damped shroud [J]. Proceedings of the CSEE, 2005, 25(18): 96-90.

秦飞, 张晓峰, 白洁, 等. 循环对称结构动应力计算的一种工程处理方法 [J]. 北京工业大学学报, 2006, 32(s1): 64-67.

QIN Fei, ZHANG Xiaofeng, BAI Jie, et al. A new approach of dynamic stress analysis for cyclic symmetry structures [J]. Journal of Beijing University of Technology, 2006, 32(s1): 64-67.

GU W W, XU Z L. 3D numerical friction contact model and its application on nonlinear vibration of damping blade [C] ∥Proceedings of ASME Turbo Expo 2010: Power for Land, Sea and Air. New York, USA: ASME, 2010: 809-817.

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

一种利用起车过程瞬态振动响应的转子动力学参数识别方法

采用不同管排组合的换热器弹性管束壳程流体诱导振动响应

语义区分和子图整合驱动的知识图谱表示学习方法

融合物理信息与深度算子网络的变压器绕组热-流场快速计算方法

不同板叠材料热声热机能量转换过程数值模拟研究