微波频段粗糙金属表面等效电导率的数值计算及验证

王怡然; 叶鸣; 高凡; 陈雄; 贺永宁

doi:10.7652/xjtuxb201610003

您当前的位置：

首页 >

文章列表页 >

微波频段粗糙金属表面等效电导率的数值计算及验证

更新时间：2025-07-09

- 微波频段粗糙金属表面等效电导率的数值计算及验证
- A Numerical Method of Equivalent Electrical Conductivity of Rough Metal Surface at Microwave Frequency Band and Its Verification
- 西安交通大学学报 2016年50卷第10期页码：15-18+35
- 作者机构：
  
  西安交通大学电子与信息工程学院,西安,710049
- 作者简介：
- 基金信息：
  
  : 2016-03-29。作者简介: 王怡然(1990—),男,硕士生;贺永宁(通信作者),女,教授,博士生导师。基金项目: 国家自然科学基金资助项目(615013564)
- DOI：10.7652/xjtuxb201610003
  中图分类号： TM931
- 网络首发：2016-10-10，
  
  纸质出版：2016
- 稿件说明：
移动端阅览
王怡然, 叶鸣, 高凡, 等. 微波频段粗糙金属表面等效电导率的数值计算及验证[J]. 西安交通大学学报, 2016,50(10):15-18+35.

A Numerical Method of Equivalent Electrical Conductivity of Rough Metal Surface at Microwave Frequency Band and Its Verification[J]. 2016, 50(10): 15-18+35.
王怡然, 叶鸣, 高凡, 等. 微波频段粗糙金属表面等效电导率的数值计算及验证[J]. 西安交通大学学报, 2016,50(10):15-18+35. DOI： 10.7652/xjtuxb201610003.

A Numerical Method of Equivalent Electrical Conductivity of Rough Metal Surface at Microwave Frequency Band and Its Verification[J]. 2016, 50(10): 15-18+35. DOI： 10.7652/xjtuxb201610003.

摘要

为了评估表面粗糙度对微波频段金属表面等效电导率的影响

提出了一种基于梯度模型的粗糙金属表面等效电导率数值计算方法并进行实验验证。首先基于电导率梯度模型

将粗糙金属表面等效为电导率渐变的若干光滑薄层的叠加; 其次基于电磁波在薄层内的损耗及薄层间界面的传输特性

对粗糙金属表面的总损耗进行数值计算并获取等效表面电导率; 最后运用替换端板谐振腔法对不同粗糙度的黄铜样片在8.98、10.78 GHz进行表面电导率测试。实验结果表明:在0.1～3 μm的均方根粗糙度范围内

等效电导率随粗糙度增加而减小

且基于梯度模型的等效电导率计算方法所得理论预测值相比于已有理论更符合实测结果。

Abstract

A numerical method of equivalent conductivity based on a gradient model is proposed to evaluate the effect of surface roughness on the equivalent electrical conductivity of metal surface at microwave band and experimental verification of the method is performed. Firstly

it is based on the gradient model of conductivity that the surface of a rough metal is equivalent to the superposition of several smooth thin layers. Secondly

the loss and transmission characteristics of the electromagnetic wave in each thin layer is based to calculate the total loss of the rough metal surface and to obtain the equivalent surface conductivity. Finally

the resonant cavity with replaceable end plate is used to measure the surface conductivities of machined brass samples with various roughness at 8.98 GHz and 10.78 GHz

respectively. Results indicate that

the equivalent conductivity decreases as the roughness increases for samples with RMS roughness in the range of 0.1-3 μm and that the theoretical predicted value of the equivalent conductivity from the proposed numerical method has a better agreement with measurement results than that from existing theories.

关键词

Keywords

references

MORGAN S P. Effect of surface roughness on eddy current losses at microwave frequencies [J]. Journal of Applied Physics, 1949, 20(4): 352-362.

EHSAN M A, ZHOU Z, LIU L, et al. An analytical through silicon Via(TSV)surface roughness model applied to a millimeter wave 3-D IC [J]. IEEE Transactions on Electromagnetic Compatibility, 2015, 57(4): 1-12.

YI M, LI S, YU H, et al. Surface roughness modeling of substrate integrated waveguide in D-Band [J]. IEEE Transactions on Microwave Theory Techniques, 2016, 64(4): 1209-1216.

LO H L, CHEAH B E. Study of conductor surface roughness impact on package insertion loss [C]∥2015 IEEE 17th Electronics Packaging and Technology Conference. Piscataway, NJ, USA: IEEE, 2015: 7412292.

贾琦, 黄斌科. 粗糙导体表面提取印刷电路板介质参数的微分外推方法 [J]. 西安交通大学学报, 2015, 49(8): 11-16.

JIA Qi, HUANG Binke. A differential extrapolation method to extract dielectric parameters of PCB with roughened conductor surface [J]. Journal of Xi'an Jiaotong University, 2015, 49(8): 11-16.

波扎尔. 微波工程 [M]. 北京: 电子工业出版社, 2006: 26-29.

GROISS S, BARDI I, BIRO O, et al. Parameters of lossy cavity resonators calculated by the finite element method [J]. IEEE Transactions on Magnetics, 1996, 32(3): 894-897.

HUANG B, CHEN J, JIANG W. Effects of surface roughness on TE modes in rectangular waveguide [J]. Journal of Infrared, Millimeter, and Terahertz Waves, 2009, 30(7): 717-726.

CHEN C D, TZUANG C K C, PENG S T. Full-wave analysis of a lossy rectangular waveguide containing rough inner surfaces [J]. IEEE Microwave and Guided Wave Letters, 1992, 2(5): 180-181.

GOLD G, HELMREICH K. A physical model for skin effect in rough surfaces [C]∥2012 7th European Microwave Integrated Circuit Conference. Piscataway, NJ, USA: IEEE, 2012: 631-634.

GOLD G, HELMREICH K. Surface impedance concept for modeling conductor roughness [C]∥2015 IEEE MTT-S International Microwave Symposium. Piscataway, NJ, USA: IEEE, 2015: 1-4.

TSANG L, GU X, BRAUNISCH H. Effects of random rough surface on absorption by conductors at microwave frequencies [J]. IEEE Microwave and Wireless Components Letters, 2006, 16(4): 221-223.

叶鸣, 贺永宁, 胡少光, 等. 微波频段金属表面电阻的谐振腔测试方法研究 [C]∥2013全国天线年会论文集. 北京: 电子工业出版社, 2013: 1428-1430.

WILKER, C, SHEN Z Y, PANG P, et al. 5 GHz high-temperature-superconductor resonators with high Q and low power dependence up to 90 K [J]. IEEE Transactions on Microwave Theory and Techniques, 1991, 39(9): 1462-1467.

曾成. 镜像法测试高温超导薄膜微波表面电阻的研究 [D]. 成都: 电子科技大学, 2009: 42-47.

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

张角凹坑气膜孔对双层壁气膜冷却特性的影响

面向高海拔空冷发电机防晕性能演化规律的电热耦合研究

融合物理信息与深度算子网络的变压器绕组热-流场快速计算方法

采用机器学习的大规模并行程序I/O性能建模与预测方法

电动车辆间接热系统快速除湿响应迟滞机理及优化控制策略