机床导轨滚转角测量误差分析

齐静雅 1; 王昭 1; 黄军辉 1; 余宝 1; 高建民 2

doi:10.7652/xjtuxb201609005

您当前的位置：

首页 >

文章列表页 >

机床导轨滚转角测量误差分析

更新时间：2025-07-09

- 机床导轨滚转角测量误差分析
- Error Analysis on the Roll Angle Measurement of Machine Tool's Guideway
- 西安交通大学学报 2016年50卷第9期页码：31-35
- 作者机构：
  
  西安交通大学机械工程学院,西安,710049
- 作者简介：
- 基金信息：
  
  : 2016-02-24。作者简介: 齐静雅(1991—),女,博士生;黄军辉(通信作者),男,讲师。基金项目: 国家自然科学基金资助项目(61405156)
- DOI：10.7652/xjtuxb201609005
  中图分类号： TH741
- 网络首发：2016-09-10，
  
  纸质出版：2016
- 稿件说明：
移动端阅览
齐静雅 1, 王昭 1, 黄军辉 1, 等. 机床导轨滚转角测量误差分析[J]. 西安交通大学学报, 2016,50(9):31-35.

Error Analysis on the Roll Angle Measurement of Machine Tool's Guideway[J]. 2016, 50(9): 31-35.
齐静雅 1, 王昭 1, 黄军辉 1, 等. 机床导轨滚转角测量误差分析[J]. 西安交通大学学报, 2016,50(9):31-35. DOI： 10.7652/xjtuxb201609005.

Error Analysis on the Roll Angle Measurement of Machine Tool's Guideway[J]. 2016, 50(9): 31-35. DOI： 10.7652/xjtuxb201609005.

摘要

为研究激光外差干涉法滚转角测量中反射器入射角误差对测量灵敏度的影响

利用琼斯矩阵

建立了一种新的测量光路数学模型。新模型在原有模型的基础上考虑了高反镜入射角误差的影响

基于多层介质膜作用机理

量化了高反镜入射角误差引起的反射光变化

进而推导出高反镜入射角误差对滚转角测量灵敏度的影响。结果表明:测量系统的放大倍数随高反镜入射角不同而变化

并在入射角为36°时取得理论最大值720倍

达到高反镜正常角度入射时放大倍数的6倍; 实验验证当高反镜入射角为38°时

系统放大倍数达到346倍

若采用分辨率为0.01°的相位计

滚转角的测量分辨率可达0.1″。实验结果验证了理论分析的正确性

并且提供了一种通过改变高反镜入射角来提高滚转角测量灵敏度的思路。

Abstract

To evaluate the influence of incident angle error of the reflector on the roll angle measurement of machine tool's guideway

a new mathematical model was established by Jones matrix method. The new model takes the influence of the incident angle error of high-reflectivity mirror into consideration based on the existing model. The reflected light of the mirror with different incident angles was analyzed based on the action mechanism of multiple dielectric films. Then the influence of incident angle error of reflector on the roll angle measurement was calculated. Results showed that the measurement gain coefficient varied with the incident angle and a maximum value of 720 was obtained when the incident angle was 36-deg

a 6-fold increase compared with previous results. In the experimental setup

we measured a gain coefficient of 346 at the 38-deg incident angle to the mirror. A roll angle measuring resolution 0.1-arcsec was attained using a phase meter with a resolution of 0.01-deg. The theoretical analysis of the new model was verified

which also provides a measuring sensitivity enhancement approach by carefully controlling the incident angle of the mirror.

关键词

Keywords

references

侯文玫, 钟朝阳, 乐燕芬, 等. 高精密滚转角测量干涉仪 [J]. 机械工程学报, 2014, 50(22): 22-27.

HOU Wenmei, ZHONG Chaoyao, LE Yanfen, et al. High precision roll angle interferometer [J]. Journal of Mechanical Engineering, 2013, 47(5): 99-103.

陶卫, 浦昭邦. 光栅楔形平板及其在转角测量中的应用 [J]. 光电子·激光, 2002, 13(4): 371-374.

TAO Wei, PU Zhaobang. Grating wedge disk and its application in the measurement of rotating angle [J]. Journal of Optoelectronics: Laser, 2002, 13(4): 371-374.

钟丽红, 王昭, 汤善治, 等. 机床滚转角测量中敏感元件倾斜引起的误差分析 [J]. 西安交通大学报, 2013, 47(5): 99-103.

ZHONG Lihong, WANG Zhao, TANG Shanzhi, et al. Measurement error analysis for machine tool error measurement due to inclined half wave plate [J]. Journal of Xi'an Jiaotong University, 2013, 47(5): 99-103.

TANG Shanzhi, WANG Zhao, GAO Jianmin, et al. Measurement method for roll angular displacement with a high resolution by using diffraction gratings and a heterodyne interferometer [J]. Review of Scientific Instruments, 2014, 85: 045110.

JIANG H, YIN C. Sensitivity enhanced roll angle measurement [J]. Opt Eng, 2000, 39(2): 516-519.

WU Chien-ming, CHANG Yi-tsung. Roll angle displacement system with microradian accuracy [J]. Sensors and Actuators: A, 2004, 116: 145-149.

LIU Zhongyao, LIN Dejiao, JIANG Hong, et al. Roll angle interferometer by means of wave plates [J]. Sensors and Actuators: A, 2003, 104: 127-131.

李朝辉, 王昭, 黄军辉, 等. 滚转角测量中直角棱镜相位损失及解决方法 [J]. 西安交通大学学报, 2014, 48(9): 112-116.

LI Zhaohui, WANG Zhao, HUANG Junhui, et al. Phase loss of right-angle prism in roll angle measurement and its solution [J]. Journal of Xi'an Jiaotong University, 2014, 48(9): 112-116.

李朝辉, 王昭, 黄军辉, 等. 直角棱镜的保偏反射膜设计及分析 [J]. 中国激光, 2015, 42(3): 1-5.

LI Zhaohui, WANG Zhao, HUANG Junhui, et al. Design and analysis of the polarization-preserving films for rectangular prism [J]. Chinese Journal of Lasers, 2015, 42(3): 1-5.

唐晋发, 顾培夫, 刘旭, 等. 现代光学薄膜技术 [M]. 杭州: 浙江大学出版社, 2006: 107.

郁道银, 谈恒英. 工程光学基础教程 [M]. 北京: 机械工业出版社, 2007: 193.

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

激光偏振特性在微尺度工件激光弯曲成形中的作用

结构-语义-残差协同的图像压缩框架：面向隐私保护与高保真重建

隧道内燃料电池汽车氢气泄漏扩散特性及影响因素

超临界二氧化碳向心透平轮背间隙内风阻损失及流动特性研究

采用机器学习的大规模并行程序I/O性能建模与预测方法