液氦/超流氦制冷系统负压换热器仿真及优化设计

王哲 1; 厉彦忠 1; 李正宇 2; 龚领会 2

doi:10.7652/xjtuxb201608023

您当前的位置：

首页 >

文章列表页 >

液氦/超流氦制冷系统负压换热器仿真及优化设计

更新时间：2025-05-08

- 液氦/超流氦制冷系统负压换热器仿真及优化设计
- Simulation and Optimization for Sub-Atmospheric Heat Exchanger of Liquid Helium/Superfluid Helium Refrigeration System
- 西安交通大学学报 2016年50卷第8期页码：143-150
- 作者机构：
  
  西安交通大学能源与动力工程学院,西安,710049
- 作者简介：
- 基金信息：
  
  : 2015-12-31。作者简介: 王哲(1986—),男,博士生;厉彦忠(通信作者),男,教授,博士生导师。基金项目: 国家科技支撑计划资助项目(2012BAA08B03);教育部高等学校博士学科点专项科研基金资助项目(20130201110069);国家重大科研装备研制资助项目
- DOI：10.7652/xjtuxb201608023
  中图分类号： TK124
- 网络首发：2016-08-10，
  
  纸质出版：2016
- 稿件说明：
移动端阅览
王哲 1, 厉彦忠 1, 李正宇 2, 等. 液氦/超流氦制冷系统负压换热器仿真及优化设计[J]. 西安交通大学学报, 2016,50(8):143-150.

Simulation and Optimization for Sub-Atmospheric Heat Exchanger of Liquid Helium/Superfluid Helium Refrigeration System[J]. 2016, 50(8): 143-150.
王哲 1, 厉彦忠 1, 李正宇 2, 等. 液氦/超流氦制冷系统负压换热器仿真及优化设计[J]. 西安交通大学学报, 2016,50(8):143-150. DOI： 10.7652/xjtuxb201608023.

Simulation and Optimization for Sub-Atmospheric Heat Exchanger of Liquid Helium/Superfluid Helium Refrigeration System[J]. 2016, 50(8): 143-150. DOI： 10.7652/xjtuxb201608023.

摘要

针对液氦/超流氦制冷系统负压换热器

开发了一种基于分布参数微元法的准一维换热器计算模型

并采用该模型对换热器进行了仿真计算及优化设计。在传统换热器设计方法的基础上

该模型进行了分块考虑

加入了低温下变物性和轴向热损失等因素的影响

并对换热器进行温度、压力耦合计算

准确得出了换热器内部的温度和压力场。最后

针对一个实际工况下的液氦/超流氦换热器进行了传热、流动设计和材料、翅片结构优化

结果表明:处于临界状态附近的换热器设计需要更加准确的工质物性

当换热器材料的热导率在4～10 W/(m·K)之间时

轴向导热效应对换热器长度和性能影响较小。该设计工况中采用的板翅式换热器材料为Al6061

5层排列结构(CHCHC)

翅片结构为JC654202/JC474202

能够满足设计需求。该研究工作为后续实际液氦/超流氦制冷系统负压换热器优化设计提供理论和技术支持。

Abstract

For simulating and optimizing sub-atmospheric heat exchanger of liquid helium/superfluid helium refrigeration system

a quasi-one-dimensional heat exchanger model is developed with distributed parameter differential method. Compared with the traditional heat exchanger design

this model enables to obtain the temperature and pressure fields by the coupling calculation. It takes the variable physical properties at liquid helium temperature and the axial heat loss of the heat exchanger into consideration to achieve a more accurate simulation of the temperature and pressure fields inside the heat exchanger. A liquid helium/superfluid helium heat exchanger

whose material and fin structure are optimally determined

is designed for a practical system with the proposed model

The results suggest that more accurate physical properties are necessary for the designed heat exchanger at liquid helium temperatures. When the material thermal conductivity is within the range from 4 to 10 W/(m·K)

the minimum heat exchanger length can be obtained with a smaller effect of axial heat conduction on the heat transfer performance. The five-layer(CHCHC)plate-fin heat exchanger with the material Al6061 and fin structure JC654202/JC474202 completely meets the requirements for the working conditions of the liquid helium/superfluid helium refrigeration system.

关键词

Keywords

references

TREITE P, NUESSLEIN U, JIA Y, et al. Design, project execution, and commissioning of the 1.8 K superfluid helium refrigeration system for SRF cryomodule testing [J]. Physics Procedia, 2015, 67: 111-115.

邹龙辉, 朱伟平, 冯国超, 等. 紧凑式低温换热器研究进展 [J]. 低温与超导, 2015, 43(2): 14-19.

ZOU Longhui, ZHU Weiping, FENG Guochao, et al. Development of the compact heat exchangers in cryogenic engineering [J]. Cryogenics and Superconductivity, 2015, 43(2): 14-19.

吕翠, 伍继浩, 李青. 动态仿真在大型低温氦制冷系统中的应用 [J]. 低温与超导, 2015, 43(7): 7-13.

LÜ Cui, WU Jihao, LI Qing. Application of dynamic simulation in large scale helium cryogenic systems [J]. Cryogenics and Superconductivity, 2015, 43(7): 7-13.

NELLIS G F. A heat exchanger model that includes axial conduction, parasitic heat loads, and property variations [J]. Cryogenics, 2003, 43(9): 523-538.

米廷灿, 厉彦忠. 轴向导热对逆流式板翅换热器传热性能的影响 [J]. 西安交通大学学报, 2004, 37(11): 1142-1145.

MI Tingcan, LI Yanzhong. Influence of longitudinal heat conduction on a counterflow plate-fin heat exchanger [J]. Journal of Xi'an Jiaotong University, 2004, 37(11): 1142-1145.

GOYAL M, CHAKRAVARTY A, ATREY M D. Two dimensional model for multistream plate fin heat exchangers [J]. Cryogenics, 2014, 61(5): 70-78.

YANG Y, LI Y. General prediction of the thermal hydraulic performance for plate-fin heat exchanger with offset strip fins [J]. International Journal of Heat and Mass Transfer, 2014, 78(7): 860-870.

BARRON R F. Cryogenic heat transfer [M]. London, UK: Taylor Francis, 1999: 100-117.

钱婧. 百瓦量级超流氦制冷系统负压换热器的设计与优化分析 [D]. 哈尔滨: 哈尔滨工业大学, 2006: 2-7.

陈国邦, 金滔, 汤珂. 低温传热与设备 [M]. 北京: 国防工业出版社, 2008: 101-111.

SHAH R K, SEKULIC D P. Fundamentals of heat exchanger design [M]. New York, USA: John Wiley Sons, 2003: 70-77.

PACIO J C, DORAO C A. A review on heat exchanger thermal hydraulic models for cryogenic applications [J]. Cryogenics, 2011, 51(7): 366-379.

HANSEN B J, WHITE M J, KLEBANER A. Plate fin heat exchanger model with axial conduction and variable properties [C]∥AIP Conf Proc 1434. Washington, USA: AIP, 2012: 615-622.

BEJAN A. Convection heat transfer [M]. New York, USA: John Wiley Sons, 2013: 30-37.

FINNEMORE J E, FRANZINI J B. Fluid mechanics [M]. New York, USA: McGraw-Hill, 2002: 128-135.

WILKS J. The properties of liquid and solid helium [M]. Oxford, UK: Clarendon Press, 1967: 45-50.

MC CARTY R D. Thermophysical properties of helium-4 from 2 to 1 500 K with pressures to 1 000 atmospheres [S]. Washington, USA: National Bureau of Standards, 1972: 12-17.

BETTS D S. Bulk fluid helium: a review for users [J]. Cryogenics, 1976, 16(1): 3-16.

NIST. NIST reference fluid thermodynamic and transport properties [EB/OL]. [2015-07-01]. http:∥www. nist. gov/srd/upload/REFPROP8. PDF.

SCHWARTZVERG F R, OSGOOD S H, KEYS R D. Cryogenic materials data handbook [M]. Washington, USA: National Bureau of Standards, 1968: 11-27.

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

催化剂填充板翅式换热器的流动换热与正仲转化性能研究

板翅式换热器锯齿型翅片参数的遗传算法优化研究

轴向导热对板翅式换热器传热性能的影响

利用流固耦合分析的板翅式换热器锯齿型翅片多目标优化

板翅式换热器热通道结霜过程的数值模拟