导轨式电磁发射装置电枢熔化波有限元计算

谭赛; 鲁军勇; 张晓; 关晓存; 龙鑫林

doi:10.7652/xjtuxb201603017

您当前的位置：

首页 >

文章列表页 >

导轨式电磁发射装置电枢熔化波有限元计算

更新时间：2025-07-09

- 导轨式电磁发射装置电枢熔化波有限元计算
- Finite Element Analysis of Melt Wave Ablation in Electromagnetic Rail Launcher Armatures
- 西安交通大学学报 2016年50卷第3期页码：106-111
- 作者机构：
  
  海军工程大学舰船综合电力技术国防科技重点实验室,武汉,430033
- 作者简介：
- 基金信息：
  
  : 2015-08-19。作者简介: 谭赛(1988—),男,博士生;鲁军勇(通信作者),男,研究员,博士生导师。基金项目: 国家自然科学基金资助项目(51207162,51522706,51407191);国家重点基础研究发展计划资助项目(613262)
- DOI：10.7652/xjtuxb201603017
  中图分类号： TM315
- 网络首发：2016-03-10，
  
  纸质出版：2016
- 稿件说明：
移动端阅览
谭赛, 鲁军勇, 张晓, 等. 导轨式电磁发射装置电枢熔化波有限元计算[J]. 西安交通大学学报, 2016,50(3):106-111.

Finite Element Analysis of Melt Wave Ablation in Electromagnetic Rail Launcher Armatures[J]. 2016, 50(3): 106-111.
谭赛, 鲁军勇, 张晓, 等. 导轨式电磁发射装置电枢熔化波有限元计算[J]. 西安交通大学学报, 2016,50(3):106-111. DOI： 10.7652/xjtuxb201603017.

Finite Element Analysis of Melt Wave Ablation in Electromagnetic Rail Launcher Armatures[J]. 2016, 50(3): 106-111. DOI： 10.7652/xjtuxb201603017.

摘要

针对单元烧蚀算法精度较低的问题

基于导轨式电磁发射装置的二维控制方程

推导出采用求解量移动法处理运动问题的伽辽金有限元离散方程

建立了电磁-温度-运动耦合场有限元计算模型。以单元节点为烧蚀判断对象

采用节点烧蚀算法处理电枢材料烧蚀问题

建立了电枢熔化波模型

对运动电枢的烧蚀速度进行了数值计算。模型的计算结果表明:在激励电磁感应强度为40 T、电枢运动速度为150 m/s的情况下

采用节点烧蚀法得到的熔化波烧蚀速度为Barber理论模型计算值的94%

而相关文献采用单元烧蚀法的计算值为Barber理论模型计算值的73%。因此

与采用单元烧蚀法相比

采用节点烧蚀法的计算值与Parks和Barber两个经典理论模型的计算值更加相近

验证了该方法的正确性。

Abstract

Aiming at the low accuracy of element melt method in predicting the wave melt ablation(WMA)velocity

a new finite element method of melt wave ablation is proposed. Based on a two-dimensional governing equation of electromagnetic rail launcher

a Galerkin-form finite element discrete formulation for dealing with moving boundary by potential moving methodis derived

then the finite element model of transient electromagnetic-thermal-moving coupling problem in two dimensions is established. Using node element as the criterion

the armature WMA model is built. Computational results show that when the armature moving speed is 150 m/s and the applied magnetic induction intensity is 40 T

the WMA velocity predicted by the node melt method(NMM)is 94% of that predicted by Barber's models

while the WMA velocity predicted by Stefani using element melt method(EMM)is 73% of that predicted by Barber's models. Thus

compared with EMM

the WMA velocity predicted by NMM is closer to the results of Parks' and Barber's classic models

which verifies the correctness of the proposed NMM method.

关键词

Keywords

references

ENGEL T G, NERI J M, VERACKA M J. Characterization of the velocity skin effect in the surface layer of a railgun sliding contact [J]. IEEE Transactions on Magnetics, 2007, 44(17): 1837-1844.

GHASSEMI M, MOLAYI Y, HAMEDI M H. Analysis of force distribution acting upon the rails and the armature and prediction of velocity with time in an electromagnetic launcher with new method [J]. IEEE Transactions on Magnetics, 2007, 43(1): 132-136.

李听, 翁春生. 电磁导轨炮固体电枢非稳态电磁效应研究 [J]. 南京理工大学学报: 自然科学版, 2009, 33(1): 108-111.

LI Xin, WENG Chunsheng. Unsteady electromagnetic effect on solid armature railguns [J]. Journal of Nanjing University of Science and Technology: Natural Science, 2009, 33(1): 108-111.

HSIEH K T. Lagrangian formulation for mechanically, thermally coupled electromagnetic diffusive processes with moving conductors [J]. IEEE Transactions on Magnetics, 1995, 31(1): 604-609.

LIU Hsingpang, LEWIS M C. 3-D electromagnetic analysis of armatures and rails for high launch energy applications [J]. IEEE Transactions on Magnetics, 2009, 45(1): 322-326.

王刚华, 谢龙, 王强, 等. 电磁轨道炮电磁力学分析 [J]. 火炮发射与控制学报, 2011(1): 69-71

WANG Ganghua, XIE Long, WANG Qiang, et al. Analysis on electromagnetic mechanics in electromagnetic railgun [J]. Journal of Gun Launch Control, 2011(1): 69-71.

PARKS P. Current melt wave model for transitioning solid armatures [J]. Journal of Applied Physics, 1990, 67(7): 3511-3516.

BARBER J, DREIZIN Y. Model of contact transitioning with realistic armature rail interface [J]. IEEE Transactions on Magnetics, 1995, 31(1): 96-100.

BENTON T, STEFANI F, SATAPATHY S, et al. Numerical modeling of melt wave erosion in conductors [J]. IEEE Transactions on Magnetics, 2003, 39(1): 129-133.

MERRILL R, STEFANI F. Electrodynamics of the current melt wave erosion boundary in a conducting half-space [J]. IEEE Transactions on Magnetics, 2003, 39(1): 66-71.

巩飞, 翁春生. 固体电枢熔化波烧蚀的二维数值模拟 [J]. 南京理工大学学报, 2012, 36(3): 487-491.

GONG Fei, WENG Chunsheng. Two dimensional numerical simulation of melt wave erosion in solid armatures [J]. Journal of Nanjing University of Science and Technology, 2012, 36(3): 487-491.

STEFANI F, MERRILL R, WATT T. Numerical modeling of melt wave erosion in two-dimensional block armatures [J]. IEEE Transactions on Magnetics, 2005, 41(1): 437-441.

黄涛, 阮江军, 张宇娇, 等. 瞬态运动电磁问题的时步有限元方法研究 [J]. 中国电机工程学报, 2013, 33(6): 168-175.

HUANG Tao, RUAN Jiangjun, ZHANG Yujiao, et al. Research on the time stepping element method for solving the transient motion electromagnetic problems [J]. Proceedings of the CSEE, 2013, 33(6): 168-175.

WATT T, STEFANI F. The effect of current and speed on perimeter erosion in recovered armatures [J]. IEEE Transactions on Magnetics, 2005, 41(1): 448-452.

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

气液射流反应流动特性的数值研究

结构-语义-残差协同的图像压缩框架：面向隐私保护与高保真重建

电动车辆间接热系统快速除湿响应迟滞机理及优化控制策略

EBSILON软件在热电联产系统优化中的应用综述

多工况下离心压气机叶轮-机匣一体联合设计优化