变截面辊弯成形装备运动特性研究

黄昔光 1; 王健 1; 李端玲 2; 管延智 3

doi:10.7652/xjtuxb201602017

您当前的位置：

首页 >

文章列表页 >

变截面辊弯成形装备运动特性研究

更新时间：2025-07-09

- 变截面辊弯成形装备运动特性研究
- Motion Characteristics Analysis for Variable Cross Section Roll-Forming Machine
- 西安交通大学学报 2016年50卷第2期页码：98-103+144
- 作者机构：
  
  北方工业大学柔性变截面辊弯成形北京市工程技术研究中心,北京,100144
- 作者简介：
- 基金信息：
  
  : 2015-06-30。作者简介: 黄昔光(1979—),男,博士,副教授。基金项目: 国家自然科学基金资助项目(51105003);国家科技支撑计划资助项目(2011BAG03B03);教育部新世纪优秀人才支持计划资助项目(NCET-12-0796)
- DOI：10.7652/xjtuxb201602017
  中图分类号： TG156
- 网络首发：2016-02-10，
  
  纸质出版：2016
- 稿件说明：
移动端阅览
黄昔光 1, 王健 1, 李端玲 2, 等. 变截面辊弯成形装备运动特性研究[J]. 西安交通大学学报, 2016,50(2):98-103+144.

Motion Characteristics Analysis for Variable Cross Section Roll-Forming Machine[J]. 2016, 50(2): 98-103+144.
黄昔光 1, 王健 1, 李端玲 2, 等. 变截面辊弯成形装备运动特性研究[J]. 西安交通大学学报, 2016,50(2):98-103+144. DOI： 10.7652/xjtuxb201602017.

Motion Characteristics Analysis for Variable Cross Section Roll-Forming Machine[J]. 2016, 50(2): 98-103+144. DOI： 10.7652/xjtuxb201602017.

摘要

针对U型变截面零件辊弯成形工艺要求

对变截面辊弯成形装备设计方案及其运动特性进行了研究。给出了变截面辊弯成形机的结构组成与工作原理、机构模型及其运动学方程

求解了符号形式的运动学逆解

获得了变截面辊弯成形机各个驱动轴的运动特性与末端轧辊路径的几何特性、机床结构参数以及加工速度之间的数学表达式。采用Mathematica编程对逆运动学进行仿真

获得了所有驱动轴的运动特性仿真曲线

仿真运动规律与成形工艺要求一致。基于设计方案制造了变截面辊弯成形装备

并完成了变截面辊弯成形零件的成形加工实验。实例仿真和实验结果表明:装备移动关节驱动轴的运动特性与机械结构参数、加工速度以及轧辊成形轨迹曲线有关

而转动关节驱动轴的运动特性只与轧辊运动轨迹曲线有关; 新方案能够完成板材的进给、拉伸和折弯操作

实现连续的变截面辊弯成形加工

成形精度可达0.397 mm。

Abstract

A scheme for variable cross section roll-forming machine is proposed and the motion characteristics are analyzed to specially meet the demand of a U-profile variable cross section roll-forming parts. The mechanical structure

working principle and kinematic diagram are introduced. The inverse kinematics analysis problem is solved by symbolical arithmetic

and the transformation relationship of the motion characteristics of all drive shafts to the geometrical properties of machining pat

mechanical structure parameters and velocity of feeding of the metal sheet is established. Then kinematic simulation curves of all drive shafts are obtained with software Mathematica

and the formed track well coincides with the desired shape. A variable cross section roll-forming machine is constructed following the proposed scheme and the experiment for forming a U-profile variable cross section roll-forming part is conducted. The simulation and experiment show that the novel scheme enables to realize continuous process of feeding

stretching and compressing of metal sheet with the highest forming accuracy of 0.397 mm.

关键词

Keywords

references

GROCHE P, BREITENBACH G, JÖCKEL M, et al. New tooling concepts for future roll forming applications [C]∥Proceedings of 4th International Conference on Industrial Tools. Celje, Slovenia: TECOS. Slovenian Tool and Die Development Centre, 2003: 121-126.

ONA H. Study on development of intelligent roll forming machine [C]∥Proceedings of 8th International Conference on Technology of Plasticity. Verona, Italy: Padova. Edizioni Progetto, 2005: 503-504.

ONA H, SHO R, NAGAMACHI T, et al. On development of flexible cold roll forming machine [C]∥Proceedings of 9th International Conference on Technology of Plasticity. Gyeongju, Korea: Hanrimwon Publishing Co., 2008: 2021-2025.

ONA H, SHOU I, HOSHI K. On strain distributions in the formation of flexible channel section development of flexible cold roll forming machine [J]. Advanced Materials Research, 2012, 576: 137-140.

GROCHE P, HENKELMANN M, GÖTZ P, et al. Cold rolled profiles for vehicle construction [J]. Archives of Civil and Mechanical Engineering, 2008, 28(3): 31-38.

李新亚, 王德成, 刘丰, 等. 先进成形技术与装备发展道路刍议: 先进成形技术与装备发展现状与趋势 [J]. 机械工程学报, 2010, 46(17): 100-104.

LI Xinya, WANG Decheng, LIU Feng, et al. Visioning future of advanced manufacture technology equipment: present situation tendency of advanced forming technique equipment [J]. Journal of Mechanical Engineering, 2010, 46(17): 100-104.

LINDGREN M, INGMARSSON L. 3D roll-forming of hat-profile with variable depth and width [EB/OL]. [2015-05-20]. http: ∥www.diva-portal.org/smash/get/diva2:522033/FULLTEXT01.pdf.

SEDLMAIER A, HENNING R. Making tubes discontinuous cross sections by means of 3D roll forming [C]∥Beijing Tube International Technical Conference. Beijing, China: International Tube Association, 2010: 31-36.

景作军, 张若青, 艾正青. 变截面辊弯成形试验 [J]. 塑性工程学报, 2012, 19(16): 23-27.

JING Zuojun, ZHANG Ruoqing, AI Zhengqing. Experimental study on variable cross section roll forming [J]. Journal of Plasticity Engineering, 2012, 19(16): 23-27.

韩飞, 王世鹏. 变截面辊弯成形边波机理 [J]. 塑性工程学报, 2013, 20(5): 117-121.

HAN Fei, WANG Shipeng. Research of edge-wave mechanism in flexible roll forming [J]. Journal of Plasticity Engineering, 2013, 20(5): 117-121.

LIU Jiying, AI Zhengqing, JING Zuojun, et al. Innovation of roll forming technology to face the challenge of fast developing [C]∥Beijing Tube International Technical Conference. Beijing, China: International Tube Association, 2010: 23-30.

小奈弘, 刘继英. 冷弯成型技术 [M]. 北京: 化学工业出版社, 2008: 1-11.

乔治·哈姆斯. 冷弯成型技术手册 [M]. 刘继英, 艾正青, 译. 北京: 化学工业出版社, 2009: 1-223.

ABEE A, SEDLMAIER A, STEPHENSON C. Development of new 3D roll forming applications by means of numerical analysis as a part of a quality control methodology [J]. Metal Matters, 2010, 18: 21-24.

CARRUTH M A, ALLOOD J M. The development of a hot rolling process for variable cross-section I-beams [J]. Journal of Materials Processing Technology, 2012, 212: 1640-1653.

熊有伦. 机器人学 [M]. 北京: 机械工业出版社, 1993: 55-70.

黄昔光, 廖启征, 魏世民, 等. 基于Groebner-Sylvester法的一般6-6型台体并联机构位置正解 [J]. 西安交通大学学报, 2008, 42(3): 300-303.

HUANG Xiguang, LIAO Qizheng, WEI Shimin, et al. Forward kinematics of the general 6-6 stewart mechanisms based on the Groebner-Sylvester approach [J]. Journal of Xi'an Jiaotong University, 2008, 42(3): 300-303.

王伟,樊宏周,席光.参数曲面三角网格生成的改进波前法.2014,48(3):61-67.[doi:10.7652/xjtuxb201403012]

黄泽华,李建勇,樊文刚,等.复杂曲面薄壁叶片点铣加工弹性变形预测.2012,46(5):67-72.[doi:10.7652/xjtuxb201205 012]

樊文刚,李建勇,黄泽华,等.多点切触加工在复杂凸曲面中的应用.2012,46(3):53-57.[doi:10.7652/xjtuxb201203010]

李泳峄,赵升吨,范淑琴,等.花键轴增量式滚轧成形工艺的分流方式及温度效应研究.2012,46(9):60-65.[doi:10.7652/xjtuxb201209012

孙殿柱,康新才,李延瑞,等.三角Bézier曲面粗加工刀轨生成算法.2011,45(3):70-74.[doi:10.7652/xjtuxb201103013]

范淑琴,赵升吨,张琦,等.直角法兰双辊夹持扩旋成形有限元模型的确定.2010,44(5):66-70.[doi:10.7652/xjtuxb 201005014]

王伊卿,何仲云,方勇,等.气压熔融挤压快速成形材料及成形工艺研究.2010,44(1):100-104.[doi:10.7652/xjtuxb2010 01022]

刘杰,孙胜,管延锦.激光偏振特性在微尺度工件激光弯曲成形中的作用.2009,43(7):96-100.[doi:10.7652/xjtuxb2009 07021]

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

采用机器学习的大规模并行程序I/O性能建模与预测方法

混合电解槽阵列协同的风光耦合制氢系统双层多目标优化

超临界二氧化碳向心透平轮背间隙内风阻损失及流动特性研究

语义区分和子图整合驱动的知识图谱表示学习方法

不同板叠材料热声热机能量转换过程数值模拟研究