面向低碳制造的切削液供给系统优化研究

刘香浪; 张英杰; 李云龙; 高瑞

doi:10.7652/xjtuxb201602016

您当前的位置：

首页 >

文章列表页 >

面向低碳制造的切削液供给系统优化研究

更新时间：2025-07-09

- 面向低碳制造的切削液供给系统优化研究
- Cutting Fluid System Optimization for Low-Carbon Oriented Manufacturing Process
- 西安交通大学学报 2016年50卷第2期页码：91-97
- 作者机构：
  
  西安交通大学机械工程学院,西安,710049
- 作者简介：
- 基金信息：
  
  : 2015-07-04。作者简介: 刘香浪(1991—),男,硕士生;张英杰(通信作者),男,教授,博士生导师。基金项目: 国家自然科学基金资助项目(51375377)
- DOI：10.7652/xjtuxb201602016
  中图分类号： TG506
- 网络首发：2016-02-10，
  
  纸质出版：2016
- 稿件说明：
移动端阅览
刘香浪, 张英杰, 李云龙, 等. 面向低碳制造的切削液供给系统优化研究[J]. 西安交通大学学报, 2016,50(2):91-97.

Cutting Fluid System Optimization for Low-Carbon Oriented Manufacturing Process[J]. 2016, 50(2): 91-97.
刘香浪, 张英杰, 李云龙, 等. 面向低碳制造的切削液供给系统优化研究[J]. 西安交通大学学报, 2016,50(2):91-97. DOI： 10.7652/xjtuxb201602016.

Cutting Fluid System Optimization for Low-Carbon Oriented Manufacturing Process[J]. 2016, 50(2): 91-97. DOI： 10.7652/xjtuxb201602016.

摘要

针对传统切削液粗放式的供给方式所带来的污染和浪费问题

提出了一种面向低碳制造的切削液供给系统优化方法。该方法建立了制造车间切削液循环系统的资源消耗模型

指出切削液系统的优化包括切削液供给设备的改进及切削液使用工艺的优化。在系统模型分析的基础上

研究了切削液对加工过程的影响

从切削液的润滑及冷却效果出发

提出了依据切削区域摩擦因数及温度进行切削液喷射流量、压力、距离等参数的优化实施方法。构建了面向低碳制造过程的智能切削液系统控制平台

并进行了仿真实验

结果表明:切削液的实际作用效果主要包括润滑和冷却

都与切削液在切削区域的流动情况有着密切的关系; 随着润滑效果的提升

切削变形量有所减小

振动能量分布趋于均匀

切削力和温度也呈较明显的下降趋势; 依据切削区域摩擦因数与温度进行切削液喷射参数调整具有一定可行性。研究内容为面向低碳制造过程的机械制造车间切削液系统优化问题提供了一条可行的实施途径。

Abstract

A strategy of cutting fluid system optimization for low-carbon oriented manufacturing is proposed to reduce pollution and waste in the extensive supplying systems of traditional manufacturing. A resource consummation model for cutting fluid cycling system in workshop is constructed

which indicates two ways for low-carbon oriented cutting fluid system optimization

supplying equipment improvement and cutting fluid volume optimization. Then the influences of cutting fluid on machining process are analyzed. A system controlling software platform is established and some numerical simulations are carried out. It is feasible to adjust the flux volume

pressure and jetting distance of cutting fluid according to the friction coefficient and temperature in cutting zone. Good lubricating and cooling effects greatly owe to the good flow state of cutting fluid in cutting zone

the chip deformation and cutting force as well as temperature reduction and vibration energy distributes more uniformly with the reduced friction coefficient

which validates the reliability of this strategy.

关键词

Keywords

references

BRINKSMEIER E, WALTER A, JANSSEN R, et al. Aspects of cooling lubrication reduction in machining advanced materials [J]. Proceedings of the Institution of Mechanical Engineers: Part B Journal of Engineering Manufacture, 1999, 213(8): 769-778.

刘飞, 王秋莲. 机械制造系统能效评价的特点、研究现状及发展趋势 [J]. 中国机械工程, 2013, 24(11): 1550-1556.

LIU Fei, WANG Qiulian. Energy efficiency assessment of mechanical manufacturing system: characteristics, state-of-the-art and future trends [J]. China Mechanical Engineering, 2013, 24(11): 1550-1556.

刘献礼, 陈涛. 机械制造中的低碳制造理论与技术 [J]. 哈尔滨理工大学学报, 2011, 16(1): 1-8.

LIU Xianli, CHEN Tao. Theory and technology of low-carbon manufacturing in machinery manufacturing [J]. Journal of Harbin University of Science and Technology, 2011, 16(1): 1-8.

WANG Z G, RAHMAN M, WONG Y S, et al. Study on orthogonal turning of titanium alloys with different coolant supply strategies [J]. International Journal of Advanced Manufacturing Technology, 2009, 42(7/8): 621-632.

LAWAL S A, CHOUDHURY I A, NUKMAN Y. Application of vegetable oil-based metalworking fluids in machining ferrous metals: a review [J]. International Journal of Machine Tools and Manufacture, 2012, 52(1): 1-12.

SHARMA V S, DOGRA M, SURI N. Cooling techniques for improved productivity in turning [J]. International Journal of Machine Tools and Manufacture, 2009, 49(6): 435-453.

LIU N M, CHIANG K T, HUNG C M. Modeling and analyzing the effects of air-cooled turning on the machinability of Ti-6Al-4V titanium alloy using the cold air gun coolant system [J]. International Journal of Advanced Manufacturing Technology, 2013, 67(5/6/7/8): 1053-1066.

SHOKRANI A, DHOKIA V, NEWMAN S T. Environmentally conscious machining of difficult-to-machine materials with regard to cutting fluids [J]. International Journal of Machine Tools and Manufacture, 2012, 57(2): 83-101.

YILDIZ Y, NALBANT M. A review of cryogenic cooling in machining processes [J]. International Journal of Machine Tools and Manufacture, 2008, 48(9): 947-964.

ZHONG Weiwu, ZHAO Dongbiao, WANG Xi. A comparative study on dry milling and little quantity lubricant milling based on vibration signals [J]. International Journal of Machine Tools and Manufacture, 2010, 50(12): 1057-1064.

YAN Sijie, ZHU Dahu, ZHUANG Kejia, et al. Modeling and analysis of coated tool temperature variation in dry milling of Inconel 718 turbine blade considering flank wear effect [J]. Journal of Materials Processing Technology, 2014, 214(12): 2985-3001.

陈日曜. 金属切削原理 [M]. 2版. 北京: 机械工业出版社, 2002: 137-142.

杜昆,李军,晏鑫.槽缝射流对静叶端壁冷却性能的影响.2015,49(1):21-26.[doi:10.7652/xjtuxb201501004]

廖高良,王新军,李军.带槽双射流气膜冷却数值研究.2014,48(3):34-38+127.[doi:10.7652/xjtuxb201403007]

章云,梅雪松,胡振邦,等.注液式高速切削主轴动平衡装置设计及其性能研究.2013,47(3):13-17.[doi:10.7652/xjtuxb 201303003]

王建录,成冰,赵万华,等.汽轮机长叶片型面双刀加工刀位轨迹优化算法.2013,47(9):65-71.[doi:10.7652/xjtuxb 201309011]

刘丽娟,吕明,武文革.Ti-6Al-4V合金的修正本构模型及其有限元仿真.2013,47(7):73-79.[doi:10.7652/xjtuxb201307 014]

徐亮,税琳棋,高建民,等.透平叶片双工质冷却流量和流向的优化配置.2012,46(5):7-12.[doi:10.7652/xjtuxb2012 05002]

赵鹏,楼佩煌,刘明灯,等.实轴空间综合约束下的数控加工速度前瞻策略.2012,46(2):64-69.[doi:10.7652/xjtuxb 201202011]

朱爱斌,路新春,张浩,等.铜化学机械抛光材料去除机理的准连续介质法研究.2011,45(12):111-116.[doi:10.7652/xjtuxb201112020]

吕凯波,景敏卿,张永强,等.一种切削颤振监测技术的研究与实现.2011,45(11):95-99.[doi:10.7652/xjtuxb201111 018]

张琦,陈余秋,方建儒.盒形件压铸模具冷却流道排布的研究.2011,45(7):38-44.[doi:10.7652/xjtuxb201107008]

孙殿柱,康新才,李延瑞,等.三角Bézier曲面粗加工刀轨生成算法.2011,45(3):70-74.[doi:10.7652/xjtuxb201103013]

樊文刚,王小椿,姜虹,等.一种开阔自由凹曲面五坐标加工多点刀位算法.2010,44(9):69-73.[doi:10.7652/xjtuxb 201009014]

罗昔联,顾兆林,雷康斌,等.一种三维切削网格上的N-S方程离散方法.2010,44(5):15-20.[doi:10.7652/xjtuxb201005 004]

许卫疆,朱惠人.孔间距对气膜冷却效率影响的数值模拟.2009,43(3):101-105.[doi:10.7652/xjtuxb200903022]

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

面向Web服务总线集成的分阶段优先级事件驱动架构

冷库水平空气幕热湿阻隔性能数值模拟研究

结构-语义-残差协同的图像压缩框架：面向隐私保护与高保真重建

离子液体改性燃料的电流体动力学效应研究

电动车辆间接热系统快速除湿响应迟滞机理及优化控制策略