结合平衡和滤波技术抑制GaN电源转换器的电磁干扰

赵凯; 王闯; 李尊朝; 赵丽娟

doi:10.7652/xjtuxb201602007

您当前的位置：

首页 >

文章列表页 >

结合平衡和滤波技术抑制GaN电源转换器的电磁干扰

更新时间：2025-07-09

- 结合平衡和滤波技术抑制GaN电源转换器的电磁干扰
- A Method for Suppressing Electromagnetic Interference of GaN Converter Utilizing Balance and Filter Technologies
- 西安交通大学学报 2016年50卷第2期页码：38-42+131
- 作者机构：
  
  西安交通大学电子与信息工程学院,西安,710049
- 作者简介：
- 基金信息：
  
  : 2015-07-06。作者简介: 赵凯(1991—),男,硕士生;李尊朝(通信作者),男,教授,博士生导师。基金项目: 国家自然科学基金资助项目(61176038);广东省公益研究与能力建设专项基金资助项目(2015A010103002)
- DOI：10.7652/xjtuxb201602007
  中图分类号： TN911.7
- 网络首发：2016-02-10，
  
  纸质出版：2016
- 稿件说明：
移动端阅览
赵凯, 王闯, 李尊朝, 等. 结合平衡和滤波技术抑制GaN电源转换器的电磁干扰[J]. 西安交通大学学报, 2016,50(2):38-42+131.

A Method for Suppressing Electromagnetic Interference of GaN Converter Utilizing Balance and Filter Technologies[J]. 2016, 50(2): 38-42+131.
赵凯, 王闯, 李尊朝, 等. 结合平衡和滤波技术抑制GaN电源转换器的电磁干扰[J]. 西安交通大学学报, 2016,50(2):38-42+131. DOI： 10.7652/xjtuxb201602007.

A Method for Suppressing Electromagnetic Interference of GaN Converter Utilizing Balance and Filter Technologies[J]. 2016, 50(2): 38-42+131. DOI： 10.7652/xjtuxb201602007.

摘要

针对GaN Boost型电源转换器的电磁干扰降低电源可靠性的问题

提出了一种结合阻抗平衡和滤波技术抑制GaN Boost电源转换器电磁干扰的方法。由于阻抗平衡技术利于抑制低频共模电磁干扰

而滤波技术利于抑制高频共模电磁干扰

所以将两者结合以抑制GaN Boost型电源转换器的共模电磁干扰。首先用GaN高电子迁移率晶体管搭建功率级电路; 然后用耦合电感替代功率级电感

并在耦合电感的输出端加上电容以平衡寄生参数的影响; 最后加入共模电感以抑制高频共模电磁干扰

综合考虑抑制效果和电路面积

合理选择滤波器共模电感值。该组合方法与阻抗平衡单项技术相比

能有效地抑制高频共模电磁干扰; 与滤波器单项技术相比

减小了电路面积。仿真结果表明

抑制后与抑制前的电磁干扰相比

在200 kHz～10 MHz低频范围内

电源转换器的共模电磁干扰的抑制量达到40～60 dB; 在10～30 MHz高频范围内

电源转换器的共模电磁干扰的抑制量约为80 dB。

Abstract

A hybrid method to suppress electromagnetic interference(EMI)is proposed to improve the problem that the reliability of GaN boost converters is reduced by EMI and the method combines the impedance balance and filter techniques. Since the impedance balance technique has the advantage of effectively suppressing low-frequency common-mode EMI

and the filter technique can easily suppress high-frequency common-mode EMI

both the techniques are combined to reduce the common-mode EMI of the GaN boost converter. The GaN high electron mobility transistor is used to build power circuit

then a coupled inductance is used to replace the inductance of power circuit

and a capacitance is added in the output of the coupled inductance to balance the parasitic parameters. Finally

a common-mode inductor is used to suppress the high-frequency common-mode EMI

and the filter inductance is reasonably chosen by trading off between the EMI reduction and circuit area. The hybrid method not only suppresses the high-frequency common-mode EMI more effectively than the impedance balance technique does

but also occupies less circuit area than the filter technique does. Simulation results show that the hybrid method leads to a 40-60 dB reduction of the common-mode EMI in the range of 200 kHz-10 MHz and a 80 dB reduction in the range of 10-30 MHz.

关键词

Keywords

references

BLANCHETTE H F, AL-HADDAD K. Solving EMI-related problems for reliable high-power converters design with precomputed electromagnetic models [J]. IEEE Transactions on Power Electronics, 2010, 25(1): 219-227.

KONG Pengju, WANG Shuo, LEE F C, et al. Common-mode EMI study and reduction technique for the interleaved multichannel PFC converter [J]. IEEE Transactions on Power Electronics, 2008, 23(5): 2576-2584.

BANDYOPADHYAY S, RAMADASS Y K, CHANDRAKASAN A P. 20 A to 100 mA DC-DC converter with 2.8-4.2 V battery supply for portable applications in 45 nm CMOS [J]. IEEE Journal of Solid-State Circuits, 2011, 46(12): 807-2820.

ZHANG Xin, CHEN P H, OKUMA Y, et al. A 0.6 V input CCM/DCM operating digital buck converter in 40 nm CMOS [J]. IEEE Journal of Solid-State Circuits 2014, 49(11): 2377-2386.

CARLSON E J, STRUNZ K, OTIS B P. A 20 mV input boost converter with efficient digital control for thermoelectric energy harvesting [J]. IEEE Journal of Solid-State Circuits, 2010, 45(4): 741-750.

WANG Chuang, LI Zunchao, LUO Cheng, et al. An optimized auto-tuning digital DC-DC converter based on linear-non-linear and predictive PID [J]. IEICE Transactions on Electronics, 2014, 97(8): 813-819.

GAMAND F, LI Mingdong, GAQUIERE C. A 10 MHz GaN HEMT DC/DC boost converter for power amplifier applications [J]. IEEE Transactions on Circuits and Systems: II Express Briefs, 2012, 59(11): 776-779.

WANG Shuo, KONG Pengju, LEE F C. Common mode noise reduction for boost converters using general balance technique [J]. IEEE Transactions on Power Electronics, 2007, 22(4): 1410-1416.

张娜, 张团善, 武玉婷. EMI电源滤波器的原理与分析 [J]. 变频器世界, 2010, 72(12): 118-119, 110.

ZHANG Na, ZHANG Tuanshan, WU Yuting. Principle and analysis of EMI source filter [J]. The World of Inverters, 2010, 72(12): 118-119, 110.

白昊, 张强, 李万玉. 基于开关电源的EMI滤波器设计与实现 [J]. 电力电子技术, 2012, 46(5): 1-3.

BAI Hao, ZHANG Qiang, LI Wanyu. Design and implementation of EMI filter based on SMPS [J]. Power Electronics, 2012, 46(5): 1-3.

王培康, 郑峰, 杨小瑜, 等. 一种调整共模噪声源阻抗并优化EMI滤波器性能的方法 [J]. 中国电机工程学报, 2014, 43(6): 993-1000.

WANG Peikang, ZHENG Feng, YANG Xiaoyu, et al. A method for adjusting common mode noise impedance and optimizing EMI filters [J]. Proceedings of the CSEE, 2014, 43(6): 993-1000.

LIOU W R, YEH M L, CHEN P S, et al. Monolithic Low-EMI CMOS DC-DC boost converter for portable applications [J]. IEEE Transactions on Very Large Scale Integration(VLSI)Systems, 2014, 22(2): 420-424.

LI Hong, LIU Yongdi, LU Jinhu, et al. Suppressing EMI in power converters via caotic SPWM control based on Spectrum Analysis Approach [J]. IEEE Transactions on Industrial Electronics, 2014, 61(11): 6128-6137

赵金奎, 王迁. LISN在电磁兼容性检测中的应用 [J]. 电力电子技术, 2007, 41(12): 39-41.

ZHAO Jinkui, WANG Qian. Applications of LISN in EMC detection [J]. Power Electronics, 2007, 41(12): 39-41.

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

采用综合学习粒子群算法的有限冲激响应数字滤波器设计

一种曲折型缺陷地结构超宽带滤波器的设计

采用随机矩阵的多扩展目标滤波器

张角凹坑气膜孔对双层壁气膜冷却特性的影响

电动车辆间接热系统快速除湿响应迟滞机理及优化控制策略