汽车空调压缩机气阀运动规律模拟

宋明毅; 吴伟烽; 李直

doi:10.7652/xjtuxb201512023

您当前的位置：

首页 >

文章列表页 >

汽车空调压缩机气阀运动规律模拟

更新时间：2025-07-09

- 汽车空调压缩机气阀运动规律模拟
- Numerical Simulation of the Valve Motion in Automotive Air Conditioning Compressors
- 西安交通大学学报 2015年49卷第12期页码：144-150
- 作者机构：
  
  西安交通大学能源与动力工程学院,西安,710049
- 作者简介：
- 基金信息：
- DOI：10.7652/xjtuxb201512023
  中图分类号： TB652;U270.38
- 网络首发：2015-12-10，
  
  纸质出版：2015
- 稿件说明：
移动端阅览
宋明毅, 吴伟烽, 李直. 汽车空调压缩机气阀运动规律模拟[J]. 西安交通大学学报, 2015,49(12):144-150.

Numerical Simulation of the Valve Motion in Automotive Air Conditioning Compressors[J]. 2015, 49(12): 144-150.
宋明毅, 吴伟烽, 李直. 汽车空调压缩机气阀运动规律模拟[J]. 西安交通大学学报, 2015,49(12):144-150. DOI： 10.7652/xjtuxb201512023.

Numerical Simulation of the Valve Motion in Automotive Air Conditioning Compressors[J]. 2015, 49(12): 144-150. DOI： 10.7652/xjtuxb201512023.

摘要

为了解决斜盘式汽车空调压缩机因进、排气阀片断裂导致失效的问题

建立了汽车空调压缩机工作过程的三维流固耦合模型

分析了压缩机内部工作过程和气阀的运动规律

并采用汽车空调压缩机性能实验进行了验证。研究结果表明:在进气压力为0.18 MPa、排气压力为1.5 MPa、转速为2 000 r/min时

压缩机的平均进气压力损失为0.046 MPa、平均排气压力损失为0.11 MPa、压缩机的容积效率为64.98%; 以进气阀片是否延迟为选择原则

阀片厚度存在一个最佳值0.281 mm

若大于该厚度

则进气阀会关闭延迟

该结果与增加舌簧阀的阀片厚度可以缩短延迟关闭的结果相反。该结果对小型制冷压缩机舌簧阀的设计与优化具有指导意义。

Abstract

A three-dimensional fluid-structure interaction model for the working process of the automotive air conditioning compressors is proposed and its internal work process and the motion of the valve plate are analyzed to solve the problems of valve fracture in automotive air conditioning compressors. Experiments on an automotive air conditioning compressor are performed to validate the model

and the results show a reasonable agreement and that the average loss of the suction pressure is 0.046 MPa

the average loss of the discharge pressure is 0.11 MPa

and the volumetric efficiency is 64.98% when the suction pressure is 0.18 MPa

the discharge pressure is 1.5 MPa and the rotation speed is 2 000 r/min. Take the delay shut-off of valve or not as the selection principle

the results also show that an optimal thickness of the suction valve plate is 0.281 mm

and when the thickness of the valve plate exceeds the optimal value

the shut-off time of the valve is delayed with the increasing of the thickness. These results are opposite to the traditional theory that increasing the thickness of the valve leads to forward shut-off and provide a guidance to the design and optimization of reed valves used in small refrigeration compressors.

关键词

Keywords

references

林梅, 吴业正. 压缩机自动阀 [M]. 西安: 西安交通大学出版社, 1991: 2.

王枫. 活塞式制冷压缩机的舌簧阀研究综述 [J]. 流体机械, 2010, 39(1): 42-51.

WANG Feng. Study on the reed valve of piston refrigeration compressor [J]. Fluid Machinery, 2010, 39(1): 42-51.

GLEN P J R, WILLIAM P H. Optical measurement of discharge valve modal parameters for a rolling piston refrigeration compressor [J]. Measurement, 2003, 33(1): 75-84.

BULIGAN G, PAONE N, REVEL G M, et al. Valve lift measurement by optical techniques in compressors [C]∥Sixteenth International Compressor Engineering Conference. Purdue, IN, USA: Purdue University, 2002: 5-13.

LUDU A, BETTO A, REGNER G. Endoscope video of compressor valve motion and pressure measurement assist simulations for design improvement [C]∥Fifteenth International Compressor Engineering Conference. Purdue, IN, USA: Purdue University, 2000: 443-450.

HABING R A. An experimental method for validating compressor valve vibration theory [J]. Journal of Fluids and Structures, 2006, 2(5): 683-679.

林梅, 姚峻, 潘树林. 簧片阀三种力学模型的建立及比较 [J]. 应用力学学报, 1997, 14(1): 118-123.

LIN Mei, YAO Jun, PAN Shulin. Establishment of three mathematical models and comparison for the reed valves [J]. Chinese Journal of Applied Mechanics, 1997, 14(1): 118-123.

郑传祥, 李蓉, 王亮, 等. 小型制冷压缩机吸气阀的流固耦合分析和优化研究 [J]. 工程设计学报2014, 21(1): 69-74.

ZHENG Chuanxiang, LI Rong, WANG Liang, et al. Fluid-structure interaction analysis and optimization study of suction valves in small refrigeration compressors [J]. Chinese Journal of Engineering Design, 2014, 21(1): 69-74.

李蓉. 制冷压缩机过程模拟及节能技术开发研究 [D]. 杭州: 浙江大学, 2014.

KIM J, WANG S, PARK S, et al. Valve dynamic analysis of a hermetic reciprocating compressor [C]∥Eighteenth International Compressor Engineering Conference. Purdue, IN, USA: Purdue University, 2006: 1-9.

CHOI Y S, LEE J H, JEONG W B, et al. Dynamic behavior of valve system in linear compressor based on fluid-structure interaction [J]. Journal of Mechanical Science and Technology, 2010, 24(7): 1371-1377.

Sandvik Materials Technology Company. Sandvik 20C flapper valve steel. [EB/OL]. [2012-10-31]. http:∥www.doc88.com/p-1813461662795.html.

岳戈, 陈晨, 马野, 等. ADINA流体与流固耦合功能的高级应用 [M]. 北京: 人民交通出版社, 2010: 61-63.

ADINA Research and Development, Inc. Theory and modeling guide [M]. Watertown, USA: ADINA Research and Development, Inc. 2005: 8.

NAGATA S, NOZAKI T, AKIZAWA T. Analysis of dynamic behavior of suction valve using strain gauge in reciprocating compressor [C]∥Twentieth International Compressor Engineering Conference. Purdue, IN, USA: Purdue University, 2010: 1273.

仇颖, 李红旗, 吕亚东. 应用小孔喷注噪声原理分析全封闭活塞式制冷压缩机吸排气阀噪声 [J]. 流体机械, 2007, 35(1): 25-28.

QIU Ying, LI Hongqi, LÜ Yadong. Analysis of suction and discharge valve noise in a hermetic reciprocating compressor by using jet noise theory [J]. Fluid Machinery, 2007, 35(1): 25-28.

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

融合物理信息与深度算子网络的变压器绕组热-流场快速计算方法

不同板叠材料热声热机能量转换过程数值模拟研究

超临界水异常区域热力学特性研究

电动车辆间接热系统快速除湿响应迟滞机理及优化控制策略

水蒸气掺混对氨裂解气旋流燃烧与排放特性的影响研究