硬质合金内冷钻头三维参数化建模研究

潘俊浩; 卓勇; 连云崧; 张祥雷

doi:10.7652/xjtuxb201510008

您当前的位置：

首页 >

文章列表页 >

硬质合金内冷钻头三维参数化建模研究

更新时间：2025-07-09

- 硬质合金内冷钻头三维参数化建模研究
- Three-Dimensional Parametric Modeling of Carbide Internal Cooling Aiguille
- 西安交通大学学报 2015年49卷第10期页码：48-53
- 作者机构：
  
  厦门大学物理与机电工程学院,福建,厦门,361005
- 作者简介：
- 基金信息：
  
  : 2015-03-23。作者简介: 潘俊浩(1992—),男,硕士生;卓勇(通信作者),男,副教授。基金项目: 福建省产学研重大项目资助(2014H6025);福建省高端装备制造协同创新中心支持项目
- DOI：10.7652/xjtuxb201510008
  中图分类号： TH128;TP391.7
- 网络首发：2015-10-10，
  
  纸质出版：2015
- 稿件说明：
移动端阅览
潘俊浩, 卓勇, 连云崧, 等. 硬质合金内冷钻头三维参数化建模研究[J]. 西安交通大学学报, 2015,49(10):48-53.

Three-Dimensional Parametric Modeling of Carbide Internal Cooling Aiguille[J]. 2015, 49(10): 48-53.
潘俊浩, 卓勇, 连云崧, 等. 硬质合金内冷钻头三维参数化建模研究[J]. 西安交通大学学报, 2015,49(10):48-53. DOI： 10.7652/xjtuxb201510008.

Three-Dimensional Parametric Modeling of Carbide Internal Cooling Aiguille[J]. 2015, 49(10): 48-53. DOI： 10.7652/xjtuxb201510008.

摘要

针对硬质合金内冷钻头结构复杂、尺寸多、建模难度大的问题

进行三维参数化建模

在UG软件中建立了三维参数化设计系统。按照设计参数

首先将端刃截形沿螺旋线扫掠

生成内冷钻头的螺旋槽模型。其次

与传统麻花钻的钻尖仅包含单曲面或双曲面不同

内冷钻头的钻尖包含了第一后刀面、第二后刀面等多个曲面; 根据端刃第一后角、第二后角、Gash角等具体参数

建立了第一后刀面、第二后刀面、Gash面等钻尖曲面的模型。在细节处理部分

由于退刀槽由光滑曲面过渡衔接而成

难以通过数学模型的方式进行建模

因此利用UG强大的曲面造型功能

使用桥接曲线、网格曲面等操作

生成了过渡自然的退刀槽模型。运行实例表明

硬质合金内冷钻头三维参数化设计系统能够根据设计需要快速完成三维模型的建立

生成的模型准确描述了螺旋角、端刃后角、Gash角等关键参数

在退刀槽等细节部位过渡自然

实现了硬质合金内冷钻头三维模型的精确表达。

Abstract

Aiming at complex structure and difficult parametric modeling of carbide internal cooling aiguille

a system for three-dimensional parametric design is developed in Unigraphics NX(UG). According to the design parameters

a mathematical model of the cross section of the end cutting edge is established. Then the cross section is swept along the helical curve to construct the helical groove model in UG. Differing from the point of the normal twist drill

which includes only single curved surface or double curved surface

the point of carbide internal cooling aiguille consists of several surfaces

like first flank face and second flank face

so their corresponding three-dimensional models are set up in UG with such parameters as first clearance angle

second clearance angle

and gash angle of this point. The detailed structure undercut is composed of a series of smooth surfaces

the undercut model can be created by a few UG operations

such as bridge curve

through curve mesh

etc. It is found that this three-dimensional model of carbide internal cooling aiguille is sufficiently precise

and the key parameters of carbide internal cooling aiguille

such as helix angle

clearance angle and Gash angle

can be described accurately with smooth transition at the undercut in the design system.

关键词

Keywords

references

赵彦玲, 车万博, 张朝军, 等. 内冷式麻花钻的参数化设计系统 [J]. 哈尔滨理工大学学报, 2011, 16(5): 34-38.

ZHAO Yanling, CHE Wanbo, ZHANG Chaojun, et al. The parametric design system of inner cold twist drill [J]. Journal of Harbin University of Science and Technology, 2011, 16(5): 34-38.

TSAI W D, WU S M. A mathematical model for drill point design and grinding [J]. Journal of Manufacturing Science and Engineering, 1979, 101(3): 333-340.

康德纯, ARMAREGO E J A. 麻花钻直线刃圆锥面刃磨法的数学建模 [J]. 大连理工大学学报, 1998, 38(3): 290-295.

KANG Dechun, ARMAREGO E J A. Modelling of straight lipped conical point grinding method of twist drills [J]. Journal of Dalian University of Technology, 1998, 38(3): 290-295.

PAUL A, KAPOOR S G, DEVOR R E. Chisel edge and cutting lip shape optimization for improved twist drill point design [J]. International Journal of Machine Tools and Manufacture, 2005, 45(4): 421-431.

ABELE E, FUJARA M. Simulation-based twist drill design and geometry optimization [J]. CIRP Annals: Manufacturing Technology, 2010, 59(1): 145-150.

CHEN W C. Applying the finite element method to drill design based on drill deformations [J]. Finite Elements in Analysis and Design, 1997, 26(1): 57-81.

李震. 内冷式麻花钻的参数化设计及有限元分析 [D]. 哈尔滨: 哈尔滨理工大学, 2012.

张义龙, 戴俊平, 武慧敏, 等. 基于Pro/E标准麻花钻实体模型的建立与测量 [J]. 工具技术, 2014, 48(10): 83-86.

ZHANG Yilong, DAI Junping, WU Huimin, et al. Creation and measurement of three-dimensional entity model of standard twist drill based on Pro/E [J]. Tool Engineering, 2014, 48(10): 83-86.

荆浩旗, 白海清, 王春月, 等. 基于UG/Open GRIP的麻花钻参数化设计 [J]. 陕西理工学院学报: 自然科学版, 2014, 30(2): 10-14.

JING Haoqi, BAI Haiqing, WANG Chunyue, et al. Parameter design of twist drill based on UG/Open GRIP [J]. Journal of Shaanxi University of Technology: Natural Science Edition, 2014, 30(2): 10-14.

汪建鸿, 苟向锋. 标准麻花钻三维建模研究 [J]. 工具技术, 2015, 49(1): 33-36

WANG Jianhong, GOU Xiangfeng. 3D modeling studies of standards twist drill [J]. Tool Engineering, 2015, 49(1): 33-36.[11] 黎正科, 周志雄, 黑大全, 等. 深孔麻花钻三维参数化设计及其优化 [J]. 广西大学学报: 自然科学版, 2012, 37(5): 959-964.

LI Zhengke, ZHOU Zhixiong, HEI Daquan, et al. 3D parametric design and optimization of twist deep hole drill [J]. Journal of Guangxi University: Natural Science Edition, 2012, 37(5): 959-964.

倪志福, 陈壁光. 群钻: 倪志福钻头 [M]. 上海: 上海科学技术出版社, 1999: 9-20.

刘世瑶, 耿芬然. 深孔麻花钻的端截面及螺旋面的加工 [J]. 河北冶金, 2002(4): 27-31

LIU Shiyao, GENG Fenran. Working of end section shape and spiral surface of lengthened twist drills [J]. Hebei Metallurgy, 2002(4): 27-31.

梁锡坤. B样条类曲线及其在曲线参数化中的应用 [J]. 计算机应用与软件, 2009, 26(4): 93-95.

LIANG Xikun. Basic spline class curves and its application in parameterization of curves [J]. Computer Applications and Software, 2009, 26(4): 93-95.

刘奇, 林岗. 基于Visual Studio 2010的UG二次开发研究 [J]. 自动化技术与应用, 2015(1): 40-41.

LIU Qi, LIN Gang. Research of the secondary development of UG based on Visual Studio 2010 [J]. Techniques of Automation and Applications, 2015(1): 40-41.

黄勇, 张博林, 薛运锋. UG二次开发与数据库应用基础与典型范例 [M]. 北京: 电子工业出版社, 2008: 11-13.

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

动磁直线电机驱动压缩机的建模与仿真

融合物理信息与深度算子网络的变压器绕组热-流场快速计算方法

超临界二氧化碳向心透平轮背间隙内风阻损失及流动特性研究

多工况下离心压气机叶轮-机匣一体联合设计优化

离子液体改性燃料的电流体动力学效应研究