球窝/球凸结构下的U型通道蒸汽冷却性能

李森; 李亮; 杜长河

doi:10.7652/xjtuxb201509012

您当前的位置：

首页 >

文章列表页 >

球窝/球凸结构下的U型通道蒸汽冷却性能

更新时间：2025-07-09

- 球窝/球凸结构下的U型通道蒸汽冷却性能
- Heat Transfer Performance in Steam-Cooled U-Shaped Channel with Concave/Convex Structure
- 西安交通大学学报 2015年49卷第9期页码：63-69
- 作者机构：
  
  西安交通大学能源与动力工程学院,西安,710049
- 作者简介：
- 基金信息：
- DOI：10.7652/xjtuxb201509012
  中图分类号： TK474.7
- 网络首发：2015-09-10，
  
  纸质出版：2015
- 稿件说明：
移动端阅览
李森, 李亮, 杜长河. 球窝/球凸结构下的U型通道蒸汽冷却性能[J]. 西安交通大学学报, 2015,49(9):63-69.

Heat Transfer Performance in Steam-Cooled U-Shaped Channel with Concave/Convex Structure[J]. 2015, 49(9): 63-69.
李森, 李亮, 杜长河. 球窝/球凸结构下的U型通道蒸汽冷却性能[J]. 西安交通大学学报, 2015,49(9):63-69. DOI： 10.7652/xjtuxb201509012.

Heat Transfer Performance in Steam-Cooled U-Shaped Channel with Concave/Convex Structure[J]. 2015, 49(9): 63-69. DOI： 10.7652/xjtuxb201509012.

摘要

采用标准k-ω湍流模型研究了球窝/球凸结构下U型通道内蒸汽的传热与阻力特性

计算、分析了雷诺数为1×10

～5×10

、来流温比为0.79～0.93、出口压力为0.5～3 MPa时通道内的流动与传热性能

获得了拟合的传热关联式

对比了蒸汽与空气冷却特性的差异。研究结果表明:雷诺数增加在提升总体传热效果的同时能够有效降低流动阻力系数; 来流温比增大对强化传热的作用并不明显

但可以有效降低流动阻力损失; 提高出口压力可以有效增强传热效果

但大大增加了流动阻力; 出口压力为1.5～2 MPa、来流温比为0.84～0.88时蒸汽冷却参数能够获得较为理想的综合换热效果; 与空气相比

蒸汽的热物性更容易受到温度和压力的影响

导致传热增强系数的变化较大

此时雷诺数的变化对传热增强系数的贡献并不显著; 拟合的传热关联式可以准确预测通道内蒸汽冷却换热系数。

Abstract

Heat transfer performance and flow resistance characteristics of a steam-cooled U-shaped channel with concave/convex structure were numerically investigated by standard k-ω turbulent model. The heat transfer correlations were evaluated and analyzed for Reynolds number from 10 000 to 50 000

inlet temperature ratio from 0.79 to 0.93

and outlet pressure from 0.5 to 3 MPa. The different cooling performances of steam and air were discussed. It reveals that the overall heat transfer performance rises while the friction factor falls with the increasing Reynolds number; the increasing inlet temperature ratio effectively enables to reduce the flow resistance and enhance heat transfer performance obviously; the heightening outlet pressure is beneficial to heat transfer enhancement

but it also leads to greatly increased flow resistance. Thus

a combination of moderate steam pressure from 1.5 MPa to 2 MPa

and medium inlet temperature ratio from 0.84 to 0.88 is suggested to achieve an ideal heat transfer performance. The thermophysical properties of steam are more prone to be affected by temperature and pressure compared with those of air. As a result

the heat transfer performance evaluation criterion for steam varies obviously while the Reynolds number exerts slight influence.

关键词

Keywords

references

AFANASYEV V N, CHUDNOVSKY Y P, LEONTIEV A I, et al. Turbulent flow friction and heat transfer characteristics for spherical cavities on a flat plate [J]. Experimental Thermal and Fluid Science, 1993, 7(1): 1-8.

MOON H K, O'CONNELL T, GLEZER B. Channel height effect on heat transfer and friction in a dimpled passage [J]. ASME Journal of Engineering for Gas Turbines and Power, 2000, 122(2): 307-313.

MOON S W, LAU S C. Turbulent heat transfer measurements on a wall with concave and cylindrical dimples in a square channel [C]∥ASME Turbo Expo 2002: Power for Land, Sea, and Air. New York, USA: ASME, 2002: 459-467.

BURGESS N K, LIGRANI P M. Effects of dimple depth on channel Nusselt numbers and friction factors [J]. Journal of Heat Transfer, 2005, 127(8): 839-847.

BURGESS N K, OLIVEIRA M M, LIGRANI P M. Nusselt number behavior on deep dimpled surfaces within a channel [J]. Journal of Heat Transfer, 2003, 125(1): 11-18.

LIGRANI P M, HARRISON J L, MAHMMOD G I, et al. Flow structure due to dimple depressions on a channel surface [J]. Physics of Fluids, 2001, 13(11): 3442-3451.

MAHMOOD G I, SABBAGH M Z, LIGRANI P M. Heat transfer in a channel with dimples and protrusions on opposite walls [J]. Journal of Thermophysics and Heat Transfer, 2001, 15(3): 275-283.

RAO Y, WAN C, ZANG S. Comparisons of flow friction and heat transfer performance in rectangular channels with pin fin-dimple, pin fin and dimple arrays [C]∥ASME Turbo Expo 2010: Power for Land, Sea, and Air. New York, USA: ASME, 2010: 185-195.

SHEN Z, QU H, ZHANG D, et al. Effect of bleed hole on flow and heat transfer performance of U-shaped channel with dimple structure [J]. International Journal of Heat and Mass Transfer, 2013, 66: 10-22.

SHUI L, GAO J, SHI X, et al. The effect of cooling conditions on convective heat transfer and flow in a steam-cooled ribbed duct [J]. Journal of Mechanical Science and Technology, 2014, 28(1): 331-341.

STEPHENS M A, SHIH T I P, CIVINSKAS K C. Computations of flow and heat transfer in a rotating U-shaped square duct with smooth walls, AIAA 1996-3161 [R]. Reston, VA, USA: AIAA, 1996.

PATRICK W V, TAFTI D K. Computations of flow structure and heat transfer in a dimpled channel at low to moderate Reynolds number [C]∥ASME 2004 Heat Transfer/Fluids Engineering Summer Conference. New York, USA: ASME, 2004: 401-412.

武俊梅, 陶文铨. 纵向涡强化换热的数值研究及场协同原理分析 [J]. 西安交通大学学报, 2006, 40(7): 757-761.

WU Junmei, TAO Wenquan. Numerical analysis to vortex heat transfer enhancement based on field synergy principle [J]. Journal of Xi'an Jiaotong University, 2006, 40(7): 757-761.

DIXON S L. Fluid mechanics and thermodynamics of turbomachinery [M]. Oxford, UK: Butterworth-Heinemann, 2005.

王文, 刘志刚. 气体普朗特数变化规律的初步研究 [J]. 西安交通大学学报, 1999, 33(1): 77-80.

WANG Wen, LIU Zhigang. Variation of Parandtl number of gas in dilute and dense state [J]. Journal of Xi'an Jiaotong University, 1999, 33(1): 77-80.

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

蒸汽冷却带肋矩形通道流动和换热特性数值研究

开式系统中水膜闪蒸换热特性的实验研究

存在温度梯度的竖直壁面Marangoni凝结换热特性研究

超临界汽轮机中压透平级流动传热特性研究

叶片全表面换热系数和冷却效率的实验测量