等重叠率螺旋线的非球面抛光轨迹规划

曲兴田 1; 王宏一 1; 樊成 2; 吴文征 1; 刘孝龙 1

doi:10.7652/xjtuxb201506020

您当前的位置：

首页 >

文章列表页 >

等重叠率螺旋线的非球面抛光轨迹规划

更新时间：2025-07-09

- 等重叠率螺旋线的非球面抛光轨迹规划
- Uniform-Overlap-Rate Spiral Path for Aspheric Polishing
- 西安交通大学学报 2015年49卷第6期页码：126-131
- 作者机构：
  
  吉林大学机械科学与工程学院,长春,130025
- 作者简介：
- 基金信息：
  
  : 2014-08-12。作者简介: 曲兴田(1962—),男,教授;吴文征(通信作者),男,讲师。基金项目: 国家重点基础研究发展计划资助项目(2011CB706702)
- DOI：10.7652/xjtuxb201506020
  中图分类号： TH161
- 网络首发：2015-06-10，
  
  纸质出版：2015
- 稿件说明：
移动端阅览
曲兴田 1, 王宏一 1, 樊成 2, 等. 等重叠率螺旋线的非球面抛光轨迹规划[J]. 西安交通大学学报, 2015,49(6):126-131.

Uniform-Overlap-Rate Spiral Path for Aspheric Polishing[J]. 2015, 49(6): 126-131.
曲兴田 1, 王宏一 1, 樊成 2, 等. 等重叠率螺旋线的非球面抛光轨迹规划[J]. 西安交通大学学报, 2015,49(6):126-131. DOI： 10.7652/xjtuxb201506020.

Uniform-Overlap-Rate Spiral Path for Aspheric Polishing[J]. 2015, 49(6): 126-131. DOI： 10.7652/xjtuxb201506020.

摘要

为改善抛光轨迹以获得更好的加工精度

分析了轨迹在非球面上所产生的去除区域的覆盖情况

并提出了一种等重叠率螺旋线抛光轨迹规划方法。基于赫兹接触理论的去除区域的覆盖情况分析表明

常用的阿基米德螺旋线由于弹性接触变化和投影行距变化导致轨迹间去除区域接触变化

从而不能保证加工精度均匀一致

为此引入了重叠率的概念以量化分析该变化情况。提出的轨迹规划方法分析了重叠率的变化特点

并依据螺旋线的性质建立了螺旋线行距与非球面面形的变化关系

保证了轨迹间去除区域的稳定接触。仿真结果表明

在非球面抛光过程中应用等重叠率螺旋线轨迹

重叠率变化范围从阿基米德螺旋线轨迹的56.1%～26.2%缩小到现在方法的56.1%～55.3%

为非球面抛光的均匀性和一致性奠定了基础。

Abstract

To improve the polishing path and obtain better machining accuracy

the removal area generated by path on aspheric surface is analyzed

and a novel spiral tool path planning with uniform-overlap-rate is proposed. The removal area analysis following Hertz contact theory shows that the generally used Archimedes spiral fails to ensure the uniform and consistent machining accuracy due to varying contact of the removal area brought from changed elastic contact and projection path interval. Thus the concept of overlap rate is introduced to quantitatively describe the varying contact. The characteristics of varying overlap rate are revealed in the proposed path planning

and the changing relation between spiral and aspheric surface is established to guarantee the stable contact of the removal area between adjacent tool paths. The simulation shows that the range of overlap rate decreases from 56.1%-26.2% for Archimedes spiral path to 56.1%-55.3% for the proposed uniform-overlap-rate spiral path in aspheric surface polishing.

关键词

Keywords

references

LEI M, BIN H. Iso-parametric CNC tool path optimization based on adaptive grid generation [J]. The International Journal of Advanced Manufacturing Technology, 2009, 41(5): 538-548.

吴福忠, 柯映林. 组合曲面参数线五坐标加工刀具轨迹的计算 [J]. 计算机辅助设计与图形学学报, 2003, 15(10): 1247-1252.

WU Fuzhong, KE Yinglin. Iso-parametric tool-path planning for five-axis compound surface machining [J]. Journal of Computer-Aided Design Computer Graphics, 2003, 15(10): 1247-1252.

FENG H, TENG Z. Iso-planar piecewise linear NC tool path generation from discrete measured data points [J]. Computer-Aided Design, 2005, 37(1): 55-64.

樊文刚, 王小椿, 姜虹, 等. 一种开阔自由凹曲面五坐标加工多点刀位算法 [J]. 西安交通大学学报, 2010, 44(9): 69-73.

FAN Wengang, WANG Xiaochun, JIANG Hong, et al. Multi-point tool positioning strategy for five-axis machining of open sculptured concave surfaces [J]. Journal of Xi'an Jiaotong University, 2010, 44(9): 69-73.

LEE Y S. Non-isoparametric tool path planning by machining strip evaluation for 5-axis sculptured surface machining [J]. Computer-Aided Design, 1998, 30(7): 559-570.

王太勇, 张志强, 王涛, 等. 复杂参数曲面高精度刀具轨迹规划算法 [J]. 机械工程学报, 2007, 43(12): 109-113.

WANG Taiyong, ZHANG Zhiqiang, WANG Tao, et al. High precision tool path planning algorithm for complex parametric surface [J]. Chinese Journal of Mechanical Engineering, 2007, 43(12): 109-113.

MIZUGAKI Y, SAKAMOTO M, SATA T. Fractal path generation for a mental-mold polishing robot system and its evaluation by the operability [J]. CIRP Annals: Manufacturing Technology, 1992, 41(1): 531-534.

邓伟杰, 郑立功, 史亚莉, 等. 离轴非球面数控抛光路径的自适应规划 [J]. 光学精密工程, 2009, 17(1): 65-71.

DENG Weijie, ZHENG Ligong, SHI Yali, et al. Adaptive programming algorithm for generating polishing tool-path in computer controlled optical surfacing [J]. Optics and Precision Engineering, 2009, 17(1): 65-71.

DUNN C R, WALKER D D. Pseudo-random tool paths for CNC sub-aperture polishing and other applications [J]. Optics Express, 2008, 16(23): 18942-18949.

TAM H, LUI C, CK MOK A. Robotic polishing of free-form surfaces using scanning paths [J]. Journal of Materials Processing Technology, 1999, 95(1): 191-200.

ROSWELL A, XI F J, LIU G. Modelling and analysis of contact stress for automated polishing [J]. International Journal of Machine Tools and Manufacture, 2006, 46(3): 424-435.

FAN C, ZHAO J, ZHANG L, et al. Predictive models of the local and the global polished profiles in deterministic polishing of free-form surfaces [J]. Proceedings of the Institution of Mechanical Engineers: Part B Journal of Engineering Manufacture, 2014, 228(8): 868-879.

ROSOSHANSKY M, XI F, LI Y. Coverage based tool path planning for automated polishing using contact stress theory[J]. Journal of Manufacturing Systems, 2011, 30(3): 144-153.

徐芝纶. 弹性力学 [M]. 北京: 人民教育出版社, 1990: 299-302.

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

面向高海拔空冷发电机防晕性能演化规律的电热耦合研究

采用试验设计方法的第三代CO2气体箔轴承箔片几何参数敏感性分析

EBSILON软件在热电联产系统优化中的应用综述

语义区分和子图整合驱动的知识图谱表示学习方法

扇贝仿生密封腔室内超临界二氧化碳泄漏流湍动能耗散机理研究