补气技术应用于高温热泵的实验研究

何永宁; 杨东方; 曹锋; 邢子文

doi:10.7652/xjtuxb201506017

您当前的位置：

首页 >

文章列表页 >

补气技术应用于高温热泵的实验研究

更新时间：2025-07-09

- 补气技术应用于高温热泵的实验研究
- Experimental Investigation on Vapor Injection in High Temperature Heat Pump
- 西安交通大学学报 2015年49卷第6期页码：103-108
- 作者机构：
  
  西安交通大学能源与动力工程学院,西安,710049
- 作者简介：
- 基金信息：
- DOI：10.7652/xjtuxb201506017
  中图分类号： TB66
- 网络首发：2015-06-10，
  
  纸质出版：2015
- 稿件说明：
移动端阅览
何永宁, 杨东方, 曹锋, 等. 补气技术应用于高温热泵的实验研究[J]. 西安交通大学学报, 2015,49(6):103-108.

Experimental Investigation on Vapor Injection in High Temperature Heat Pump[J]. 2015, 49(6): 103-108.
何永宁, 杨东方, 曹锋, 等. 补气技术应用于高温热泵的实验研究[J]. 西安交通大学学报, 2015,49(6):103-108. DOI： 10.7652/xjtuxb201506017.

Experimental Investigation on Vapor Injection in High Temperature Heat Pump[J]. 2015, 49(6): 103-108. DOI： 10.7652/xjtuxb201506017.

摘要

为了提高高温热泵运行经济性及稳定性

优化高温系统流程

通过在热泵系统中设置换热器型经济器

实验验证双螺杆压缩机补气技术在高温热泵中应用的可行性。实验研究表明:将补气技术应用于高温热泵是可行的

冷凝器出口水温在88 ℃下通过经济器补气可有效增加高温热泵的制热量

当相对补气量由9.88%增加至22.61%时

系统总制热量增加9.28 kW

改善了其制热性能; 在压缩机补气孔口已定条件下

存在最优补气压力

使该系统制热能效比最大; 经济器的设置同时为冷凝器出口制冷剂提供较大的过冷度

保证了系统节流机构的安全运行。

Abstract

To improve heating performance and running stability of high temperature heat pump

the structure of the heat pump should be rebuilt and optimized. Setting an internal heating exchanger economizer into the heat pump system

the experiments are conducted to validate the function of vapor injection technique in twin screw high temperature heat pump system. It is indicated that vapor injection facilitates increasing the total heating capacity of the heat pump with condenser outlet water temperature of 88 ℃

and the heating capacity increases up to 9.28 kW while vapor injection ratio rises from 9.88% to 22.61%. There exists an optimal vapor injection pressure or vapor injection ratio

with which the heating COP gets the maximum in running process. The economizer also provides higher degree of supercooling for the refrigerant from the condenser to ensure working safety of the throttling structure of high temperature heat pump.

关键词

Keywords

references

WANG Kai, CAO Feng, WANG Shouguo, et al. Investigation of the performance of a high-temperature heat pump using parallel cycles with serial heating on the water side [J]. International Journal of Refrigeration, 2010, 33(6): 1142-1151.

许树学, 马国远, 彭珑. 常用制冷压缩机的准二级压缩循环特性分析 [J]. 石油化工设备, 2009(4): 1-4.

XU Shuxue, MA Guoyuan, PENG Long. Performance study on quasi two-stage compression cycle composed by different type of refrigerant compressor [J]. Petro-Chemical Equipment, 2009(4): 1-4.

XU Xing, HWANG Yunho, RADERMACHER R. Refrigerant injection for heat pumping/air conditioning systems: literature review and challenges discussions [J]. International Journal of Refrigeration, 2010, 34(2): 402-415.

XU Xing, HWANG Yunho, RADERMACHER R. Performance comparison of R410A and R32 in vapor injection cycles [J]. International Journal of Refrigeration, 2013, 36(3): 892-903.

郁永章, 肖大刚. 带经济器螺杆制冷循环系统的研究 [J]. 制冷学报, 1989(4): 15-21.

YU Yongzhang, XIAO Dagang. Study on screw refrigeration system with an economizer [J]. Journal of Refrigeration, 1989(4): 15-21.

吴华根, 彭学院, 邢子文, 等. 经济器补气压力对双螺杆制冷压缩机性能影响的试验研究 [J]. 制冷学报, 2003(4): 10-13.

WU Huagen, PENG Xueyuan, XING Ziwen, et al. Experimental study on effects of superfeed pressure of economizer on twin-screw refrigeration compressor performance [J]. Journal of Refrigeration, 2003(4): 10-13.

HEO J, JEONG M, BAEK C, et al. Comparison of the heating performance of air-source heat pumps using various types of refrigerant injection [J]. International Journal of Refrigeration, 2011, 34(2): 444-453.

ROH C, KIM M. Effect of vapor-injection technique on the performance of a cascade heat pump water heater [J]. International Journal of Refrigeration, 2014, 38(2): 168-177.

ROH C, KIM M. Effects of intermediate pressure on the heating performance of a heat pump system using R410A vapor-injection technique [J]. International Journal of Refrigeration, 2011, 34(8): 1911-1921.

王凯, 曹锋, 邢子文. 一种新型余热回收高温热泵机组的性能研究 [J]. 西安交通大学学报, 2008, 42(10): 1309-1312.

WANG Kai, CAO Feng, XING Ziwen. Development and experimental validation of high temperature heat pump for heat recovery [J]. Journal of Xi'an Jiaotong University, 2008, 42(10): 1309-1312.

张川, 马善伟, 陈江平, 等. 电子膨胀阀节流机构流量特性的实验研究 [J]. 上海交通大学学报, 2006, 40(2): 291-296, 300.

ZHANG Chuan, MA Shanwei, CHEN Jiangping, et al. Experimental research on the flow characteristic of electronic expansion valve [J]. Journal of Shanghai Jiaotong University, 2006, 40(2): 291-296, 300.

王凯, 吴勇, 李建风, 等. 中高温水源热泵工质的筛选与分析 [J]. 制冷与空调, 2007(3): 62-65.

WANG Kai, WU Yong, LI Jianfeng, et al. Analysis and selection of the refrigerants for the moderate and high temperature water-source heat pump [J]. Refrigeration and Air-Conditioning, 2007(3): 62-65.

何永宁, 夏源, 金磊, 等. 制冷剂R1234ze在高温热泵中应用的对比研究 [J]. 流体机械, 2014(3): 62-66.

HE Yongning, XIA Yuan, JIN Lei, et al. Investigation on application of refrigerant R1234ze in high-temperature heat pump [J]. Fluid Machinery, 2014(3): 62-66.

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

一种新型余热回收高温热泵机组的性能研究

冷库水平空气幕热湿阻隔性能数值模拟研究

超临界水异常区域热力学特性研究

融合物理信息与深度算子网络的变压器绕组热-流场快速计算方法

不同板叠材料热声热机能量转换过程数值模拟研究