方形蜂窝夹层曲板的振动特性研究

任树伟 1; 孟晗 1; 辛锋先 1; 卢天健 1; 2; 慈军 3; 耿丽 4

doi:10.7652/xjtuxb201503020

您当前的位置：

首页 >

文章列表页 >

方形蜂窝夹层曲板的振动特性研究

更新时间：2025-07-09

- 方形蜂窝夹层曲板的振动特性研究
- Vibration Analysis of Simply Supported Curved Sandwich Panels with Square Honeycomb Cores
- 西安交通大学学报 2015年49卷第3期页码：129-135
- 作者机构：
  
  1. 西安交通大学轻质结构和材料多学科研究中心,西安,710049
  2. 西安交通大学机械结构强度与振动国家重点实验室,西安,710049
- 作者简介：
- 基金信息：
  
  : 2014-06-19。作者简介: 任树伟(1989—),男,博士生;辛锋先(通信作者),男,副教授。基金项目: 广东省科技厅粤港关键领域重点突破项目(2011A091200008);中央高校基本科研专项基金资助项目(xjj2011005)
- DOI：10.7652/xjtuxb201503020
  中图分类号： O327
- 网络首发：2015-03-10，
  
  纸质出版：2015
- 稿件说明：
移动端阅览
任树伟 1, 孟晗 1, 辛锋先 1, 等. 方形蜂窝夹层曲板的振动特性研究[J]. 西安交通大学学报, 2015,49(3):129-135.

Vibration Analysis of Simply Supported Curved Sandwich Panels with Square Honeycomb Cores[J]. 2015, 49(3): 129-135.
任树伟 1, 孟晗 1, 辛锋先 1, 等. 方形蜂窝夹层曲板的振动特性研究[J]. 西安交通大学学报, 2015,49(3):129-135. DOI： 10.7652/xjtuxb201503020.

Vibration Analysis of Simply Supported Curved Sandwich Panels with Square Honeycomb Cores[J]. 2015, 49(3): 129-135. DOI： 10.7652/xjtuxb201503020.

摘要

针对专用车辆罐体的方形蜂窝夹层封头

研究了四边简支方形蜂窝夹层曲板结构的振动特性。以Hoff夹层板理论为基础

通过能量法将蜂窝层芯等效为面内各向同性夹层

并考虑曲率的影响

建立了四边简支方形蜂窝夹层板振动理论模型。基于有限元软件建立了考虑蜂窝层芯细节的有限元模型

对理论模型结果进行了验证

两者结果取得良好吻合。通过理论模型和有限元模型研究了夹层几何参数及内压对蜂窝夹层曲板结构固有频率和振动模态的影响。研究表明:蜂窝夹层曲板的振动模态与均质实心曲板振动模态相似

其固有频率随着内压的增大而提高

相同质量的蜂窝夹层曲板固有频率远高于均质实心曲板的同阶固有频率。所得结果为蜂窝夹层曲板结构的动力学优化设计提供了必要的理论参考。

Abstract

A theoretical model based on Hoff sandwich panel theory is proposed to investigate the vibration behavior of curved sandwich panels with square honeycomb cores. The square core is an equivalent isotropic layer and the curvature of the panel is taken into account. A finite element model considering all geometrical details is presented to investigate the influence of internal pressure and to validate the theoretical model. A systematic investigation is performed to quantify the influences of the morphological parameters of the square honeycomb core and the internal pressure. It is found that the vibration modes of the honeycomb sandwich panel are similar to those of a monolithic panel. The natural frequencies increase and are far beyond those of the monolithic panel with equal mass as the internal pressure increases. The results obtained from the present study show the advantage of curved sandwich panels in lightweight and high-safety

and are helpful for optimal design of this kind of lightweight structures.

关键词

Keywords

references

卢天健, 何德坪, 陈常青, 等. 超轻多孔金属材料的多功能特性及应用 [J]. 力学进展, 2006, 36(4): 517-535.

LU Tianjian, HE Deping, CHEN Changqin, et al. The multi-functionality of ultra-light porous metals and their applications [J]. Advances in Mechanics, 2006, 36(4): 517-535.

HU Y C, HUANG S C. The frequency response and damping effect of three-layer thin shell with viscoelastic core [J]. Computers Structures, 2000, 76(5): 577-591.

LIU J, CHENG Y S, LI R F, et al. A semi-analytical method for bending, buckling and free vibration analyses of sandwich panels with square-honeycomb cores [J]. International Journal of Structural Stability and Dynamics, 2010, 10(1): 127-151.

LOK T S, CHENG Q H. Free vibration of clamped orthotropic sandwich panel [J]. Journal of Sound and Vibration, 2000, 229(2): 311-327.

LOK T S, CHENG Q H. Free and forced vibration of simply supported, orthotropic sandwich panel [J]. Computers Structures, 2001, 79(3): 301-312.

XIN F X, LU T J. Analytical modeling of fluid loaded orthogonally rib-stiffened sandwich structures: sound transmission [J]. Journal of the Mechanics and Physics of Solids, 2010, 58(9): 1374-1396.

XIN F X, LU T J. Analytical modeling of sound transmission across finite aeroelastic panels in convicted fluids [J]. J Acoust Soc Am, 2010, 128(3): 1097-1107.

XIN F X, LU T J, CHEN C Q. Vibroacoustic behavior of clamp mounted double-panel partition with enclosure air cavity [J]. J Acoust Soc Am, 2008, 124(6): 3604-3612.

SHEN C, XIN F X, LU T J. Theoretical model for sound transmission through finite sandwich structures with corrugated core [J]. International Journal of Non-linear Mechanics, 2012, 47(10): 1066-1072.

MENG H, XIN F X, LU T J. External mean flow effects on sound transmission through acoustic absorptive sandwich structure [J]. AIAA Journal, 2012, 50(10): 2268-2276.

沈承, 辛锋先, 金峰, 等. 对边简支加筋三明治板隔声性能研究 [J]. 西安交通大学学报, 2011, 45(7): 22-29.

SHEN Cheng, XIN Fengxian, JIN Feng, et al. Sound insulation behavior of simply-supported sandwich structure with parallel study [J]. Journal of Xi'an Jiaotong University, 2011, 45(7): 22-29.

任树伟, 辛锋先, 卢天健. 蜂窝层芯夹层板结构振动和传声特性研究 [J]. 力学学报, 2013, 45(2): 349-358.

REN Shuwei, XIN Fengxian, LU Tianjian. Vibroacoustic performance of simply supported honeycomb sandwich panels [J]. Chinese Journal of Theoretical and Applied Mechanics, 2013, 45(2): 349-358.

中国科学院北京力学研究所固体力学研究室板壳组. 夹层板壳的弯曲稳定和振动 [M]. 北京: 科学出版社, 1977.

MAI S P, FLECK N A, LU T J. Optimal design of box-section sandwich beams in three-point bending [J]. International Journal of Solids and Structures, 2007, 44(14/15): 4742-4769.

杜国君, 田雨宝. 均布载荷作用下夹层圆板的载荷-频率特征关系 [J]. 工程力学, 1997, 14(2): 139-144.

DU Guojun, TIAN Yubao. Load-natural frequency eigen relation of circular sandwich plate under uniform load [J]. Engineering Mechanics, 1997, 14(2): 139-144.

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

大型可展开网状天线展开过程仿真建模与竖向索预拉力优化调控

直线冰箱压缩机的频率特性

约束阻尼结构的振动分析及结构参数优化研究

多梁结构压阻式测振加速度传感器

考虑齿圈柔性的行星传动系统固有特性与灵敏度研究