复杂机械系统时变不确定性设计方法

石博强; 段国晨; 申焱华; 余国卿

doi:10.7652/xjtuxb201503014

您当前的位置：

首页 >

文章列表页 >

复杂机械系统时变不确定性设计方法

更新时间：2025-07-09

- 复杂机械系统时变不确定性设计方法
- Evolution-Based Uncertainty Design for Complex Mechanical Systems
- 西安交通大学学报 2015年49卷第3期页码：80-84+135
- 作者机构：
  
  北京科技大学机械工程学院,北京,100083
- 作者简介：
- 基金信息：
  
  : 2014-08-11。作者简介: 石博强(1962—),男,教授,博士生导师。基金项目: 国家自然科学基金资助项目(51075029)
- DOI：10.7652/xjtuxb201503014
  中图分类号： TH122
- 网络首发：2015-03-10，
  
  纸质出版：2015
- 稿件说明：
移动端阅览
石博强, 段国晨, 申焱华, 等. 复杂机械系统时变不确定性设计方法[J]. 西安交通大学学报, 2015,49(3):80-84+135.

Evolution-Based Uncertainty Design for Complex Mechanical Systems[J]. 2015, 49(3): 80-84+135.
石博强, 段国晨, 申焱华, 等. 复杂机械系统时变不确定性设计方法[J]. 西安交通大学学报, 2015,49(3):80-84+135. DOI： 10.7652/xjtuxb201503014.

Evolution-Based Uncertainty Design for Complex Mechanical Systems[J]. 2015, 49(3): 80-84+135. DOI： 10.7652/xjtuxb201503014.

摘要

考虑机械系统参数随时间的演化

基于连续时间模型和伊藤引理

推导建立了多参数复杂机械系统时变不确定性计算模型

将系统整体时变不确定性由其漂移函数和波动函数表达

系统漂移函数和波动函数则由底层时变参数的漂移率和波动率决定

从而解析了机械系统时变不确定性设计的原理。与传统方法相比

该多参数复杂机械系统时变不确定性设计方法既可以针对各零件(或子系统)进行时变不确定性设计

也可以建立统一的系统状态方程

针对复杂机械系统进行不确定性设计

并且算得的系统可靠度是动态的

可以预测未来任意时刻的可靠度

从而为系统的未来发展趋势提供先期预警

为设备维护提供指导。通过具体算例

说明了该设计方法的应用。该设计方法具有普适性

可以推广应用于城市公交系统、城市给排水系统、燃气系统、核电系统等的时变不确定性设计和可靠性分析。

Abstract

Considering the evolution of mechanical system parameters

and based on the continuous-time model and Ito Lemma

a time-varying reliability calculation model of multi-parameter complex mechanical system is established. In this model the systems' time-varying uncertainty can be expressed by drift functions and volatility functions

which are dependent on the drift rate and volatility rate known from basic design parameters. Thus the principle of evolution-based uncertainty design(EBUD)for complex mechanical systems is expounded. Compared with the traditional methods

this method can be applied to either the evolution-based uncertainty design of the elements(or subsystems)

or the uncertainty design for complex mechanical systems by establishing uniform system state equations. By thi

s means

the dynamic system reliability can be obtained

and the reliability at any time in the future can be calculated. Thereby the time-varying reliability calculation model can forecast the system's future development trend and offer early warnings

giving proper advice for the equipment maintenance. Taking the design of bolt group as an example and with the model applied

the time-varying reliabilities of screws in different positions are calculated and compared. In this example

the basic time-varying parameters include the turning torque M

the pre-load F

the minor diameter d

and the yield strength [S

]

of the screws. This method can also be used in other fields

such as evolution-based uncertainty design and reliability analysis of urban traffic control system

urban water-supply and drainage system

urban gas supply system

and so on.

关键词

Keywords

references

TONON F, BERNARDINI A, MAMMINO A. Deter-mination of parameters range in rock engineering by means of Random Set Theory [J]. Reliability Engineering and System Safety, 2000, 70(3): 241-261.

JENSEN H A, KUSANOVIC D S. Reliability-based optimization of stochastic systems using line search [J]. Computer Methods in Applied Mechanics and Engineering, 2009, 198: 3915-3924.

ADDURI P R, PENMETSA R C. Confidence bounds on component reliability in the presence of mixed uncertain variables [J]. International Journal of Mechanical Sciences, 2008, 50(3): 481-489.

方永锋. 结构与系统的动态可靠性研究 [D]. 西安: 西安电子科技大学, 2013.

WANG Zequn, WANG Pingfeng. A new approach for reliability analysis with time-variant performance characteristics [J]. Reliability Engineering and System Safety, 2013, 115: 70-81.

ANDRIEN-RENAUD C, SUDRET B, LEMAIRE M. The PHI2 method: a way to compute time-variant reliability [J]. Reliability Engineering and System Safety, 2004, 84(1): 75-86.

GRIGORIN M, SAMORODNITSKY G. Reliability of dynamic systems in random environment by extreme value theory [J]. Probabilistic Engineering Mechanics, 2014, 38: 54-59.

JIANG C, NI B Y, HAN X, et al. Non-probabilistic convex model process: a new method of time-variant uncertainty analysis and its application to structural dynamic reliability problems [J]. Computer Method in Applied Mechanics and Engineering, 2014, 268: 656-676.

石博强, 闫永业, 范慧芳, 等. 时变不确定性机械设计方法 [J]. 北京科技大学学报, 2008, 30(9): 1050-1054.

SHI Boqiang, YAN Yongye, FAN Huifang, et al. Mechanical design method with uncertain evolution [J]. Journal of University of Science and Technology Beijing, 2008, 30(9): 1050-1054.

闫永业, 石博强. 考虑不确定性因素的时变可靠度计算方法 [J]. 西安交通大学学报, 2007, 41(11): 1303-1306.

YAN Yongye, SHI Boqiang. Time dependent reliability analysis under uncertainty [J]. Journal of Xi'an Jiaotong University, 2007, 41(11): 1303-1306.

LO A W. Maximum likelihood estimation of generalized Ito's processes with discretely sampled data [J]. Econometric Theory, 1988, 4(2): 231-247.

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

考虑不确定性因素的时变可靠度计算方法

直线电机进给系统机械系统动态特性研究

一种机械系统非线性类别辨识方法

EBSILON软件在热电联产系统优化中的应用综述

三塔合一间接空冷系统结构参数对夏季运行特性的影响研究