转台轴承静刚度建模及其影响因素分析

位文明; 吕盾; 张俊; 赵万华

doi:10.7652/xjtuxb201412002

您当前的位置：

首页 >

文章列表页 >

转台轴承静刚度建模及其影响因素分析

更新时间：2025-07-09

- 转台轴承静刚度建模及其影响因素分析
- Static Stiffness of Three-Row Cylindrical Roller Bearing for Rotary Table
- 西安交通大学学报 2014年48卷第12期页码：8-14
- 作者机构：
  
  西安交通大学机械制造系统工程国家重点实验室,西安,710054
- 作者简介：
- 基金信息：
  
  : 2014-06-19。作者简介: 位文明(1985—),男,博士生;赵万华(通信作者),男,教授,博士生导师。基金项目: 国家自然科学基金重点资助项目(51235009);国家科技重大专项资助项目(2011zx04016-031)
- DOI：10.7652/xjtuxb201412002
  中图分类号： TH133.33
- 网络首发：2014-12-10，
  
  纸质出版：2014
- 稿件说明：
移动端阅览
位文明, 吕盾, 张俊, 等. 转台轴承静刚度建模及其影响因素分析[J]. 西安交通大学学报, 2014,48(12):8-14.

Static Stiffness of Three-Row Cylindrical Roller Bearing for Rotary Table[J]. 2014, 48(12): 8-14.
位文明, 吕盾, 张俊, 等. 转台轴承静刚度建模及其影响因素分析[J]. 西安交通大学学报, 2014,48(12):8-14. DOI： 10.7652/xjtuxb201412002.

Static Stiffness of Three-Row Cylindrical Roller Bearing for Rotary Table[J]. 2014, 48(12): 8-14. DOI： 10.7652/xjtuxb201412002.

摘要

为了改善转台的动静特性

分析了三排圆柱滚子转台轴承静刚度与轴承结构型式、装配工艺和外载荷的关系。结合轴承游隙、螺钉拧紧力矩、径向与轴向滚子间的相互作用和外载荷等因素

将轴向滚子与轴圈间的接触看作理想平面接触

考虑径向滚子压力沿轴向的分布

并利用Boussinesq力与变形关系式求解实际的压力值

通过求解轴承的整体静力平衡方程

得到了三排圆柱滚子转台轴承5个方向的静刚度值。分析结果表明:转台固有频率测试与理论值误差不超过3.0%

验证了刚度理论模型的准确性; 轴向滚子与径向滚子载荷间的相互作用很小; 螺钉拧紧力矩、径向游隙和外载荷对转台轴承刚度有重要影响

随着螺钉拧紧力矩和径向预压量的增大

外载荷对刚度的影响减弱。

Abstract

To improve static and dynamic performances of rotary table

the effects of configurations

assembling technology and external load on the static stiffness of a three-row cylindrical roller bearing for rotary table are investigated. A theoretical model of static stiffness of three-row cylindrical bearing for rotary table is proposed considering the clearance

bolt preloads

and reactions of axial and radial rollers with external load. The contacts between the axial rollers and the outer ring are treated as ideal plane contact. And the actual contact forces and their distribution along the axial of radial rollers are obtained by Boussinesq's relationship between force and deformation

the static stiffness in five directions is then sought out by solving the static equivalent equations. It is shown that the maximum error between experimental and theoretical results of natural frequency of the rotary table is less than 3.0%

thus the theoretical model is verified. The reactions between loads acting on the axial rollers and radial rollers are negligible. The bolt preloads

radial clearance and external load exert obvious effects on the static stiffness of rotary table bearing

and the effect of external load decreases with the increasing preloads of bolts and radial clearance.

关键词

Keywords

references

LIM T C, SINGH R. Vibration transmission through rolling element bearings: part I bearing stiffness formulation[J]. Journal of Sound and Vibration, 1990, 139(2): 179-199.

GUO Y, PARKER R G. Stiffness matrix calculation of rolling element bearings using a finite element/contact mechanics model[J]. Mechanism and Machine Theory, 2012, 51: 32-45.

邹英永, 温建民, 于广滨. 径向力和弯矩联合作用下滚子轴承的刚度计算[J]. 中国机械工程, 2006, 17(15): 1572-1575.

ZOU Yingyong, WEN Jianmin, YU Guangbin. Stiffness calculation of roller bearings with radial force and moment loads[J]. China Mechanical Engineering, 2006, 17(15): 1572-1575.

崔立, 王黎钦, 郑德志, 等. 航空发动机高速滚子轴承动态特性分析[J]. 航空学报, 2008, 29(2): 492-498.

CUI Li, WANG Liqin, ZHENG Dezhi, et al. Analysis on dynamic characteristics of aero-engine high-speed roller bearings[J]. Acta Aeronautica Et Astronautica Sinica, 2008, 29(2): 492-498.

于春来, 刘洪海, 郭云飞. 三排圆柱滚子转盘轴承寿命计算[J]. 轴承, 2011(8): 7-8.

YU Chunlai, LIU Honghai, GUO Yunfei. Life of three row cylindrical roller slewing bearings[J]. Bearings, 2011(8): 7-8.

AGUIRREBEITIA J, ABASOLO M, AVILÉS R, et al. Theoretical calculation of general static load-carrying capacity for the design and selection of three row roller slewing bearings[J]. Mechanism and Machine Theory, 2012, 48: 52-61.

KANIA L, KRYNKE M, MAZANEK E. A catalogue capacity of slewing bearings[J]. Mechanism and Machine Theory, 2012, 58: 29-45.

GÖNCZ P, POTOCˇNIK R, GLODE S. Computational model for determination of static load capacity of three-row roller slewing bearings with arbitrary clearances and predefined raceway deformations[J]. International Journal of Mechanical Sciences, 2013, 73: 82-92.

HARRIS T A, KOTZALAS M N. Rolling bearing analysis: advanced concepts of bearing technology[M]. Boca Raton, FL, SUA: CRC Press, 2006: 17-27.

符晶, 王慧, 温诗铸. 任意弹性表面接触问题的数值解法及对滚子修缘的分析[J]. 轴承, 1990(1): 6-12.

FU Jing, WANG Hui, WEN Shizhu. Numerical method for contact problem between arbitrary elastic surfaces and analysis of crowned roller[J]. Bearings, 1990(1): 6-12.

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

多支承轴系轴承受力与刚度的有限元迭代计算方法

角接触球轴承动刚度的实验研究

采用试验设计方法的第三代CO2气体箔轴承箔片几何参数敏感性分析

融合物理信息与深度算子网络的变压器绕组热-流场快速计算方法

语义区分和子图整合驱动的知识图谱表示学习方法