金属模具表面稀土催化共晶渗硼组织及其性能

张艳; 鲍崇高; 侯书增

doi:10.7652/xjtuxb201410015

您当前的位置：

首页 >

文章列表页 >

金属模具表面稀土催化共晶渗硼组织及其性能

更新时间：2025-07-09

- 金属模具表面稀土催化共晶渗硼组织及其性能
- Microstructure and Properties of Metal Mold Surface by Rare Earth Catalytic Eutectic Boronizing
- 西安交通大学学报 2014年48卷第10期页码：96-100+107
- 作者机构：
  
  西安交通大学金属材料强度国家重点实验室,西安,710049
- 作者简介：
- 基金信息：
  
  : 2014-05-16。作者简介: 张艳(1987—),女,硕士生;鲍崇高(通信作者),男,教授,博士生导师。基金项目: 国家自然科学基金资助项目(51372194,50872108)
- DOI：10.7652/xjtuxb201410015
  中图分类号： TB31
- 网络首发：2014-10-10，
  
  纸质出版：2014
- 稿件说明：
移动端阅览
张艳, 鲍崇高, 侯书增. 金属模具表面稀土催化共晶渗硼组织及其性能[J]. 西安交通大学学报, 2014,48(10):96-100+107.

Microstructure and Properties of Metal Mold Surface by Rare Earth Catalytic Eutectic Boronizing[J]. 2014, 48(10): 96-100+107.
张艳, 鲍崇高, 侯书增. 金属模具表面稀土催化共晶渗硼组织及其性能[J]. 西安交通大学学报, 2014,48(10):96-100+107. DOI： 10.7652/xjtuxb201410015.

Microstructure and Properties of Metal Mold Surface by Rare Earth Catalytic Eutectic Boronizing[J]. 2014, 48(10): 96-100+107. DOI： 10.7652/xjtuxb201410015.

摘要

为了提高模具表面的磨损性能

采用稀土催化共晶渗硼工艺对45钢模具表面进行了处理

研究了不同稀土加入量对共晶渗硼层组织、渗硼层厚度、硬度梯度及其磨损性能的影响规律

分析了稀土活化催渗机理和材料磨损机制。结果表明:共晶渗硼层组织为硼化物与γ铁的混合物; 稀土加入量为9%时共晶渗硼效果最佳

渗硼层厚度比传统固体渗硼层增加近1倍

渗硼层硬度显著提高且硬度梯度减小; 稀土元素具有活化催渗硼原子、促进硬质相形成以及细化晶粒、强化晶界的作用; 经稀土催化渗硼的试验材料两体磨损性能比传统固体渗硼材料提高约18%

且耐磨行程提高近12倍; 试验材料磨损失效主要以显微切削为主; 渗硼层厚度增大、硬度提高、硬度梯度减小是稀土催化共晶渗硼材料磨损性能得以提高的主要原因。

Abstract

The rare earth catalytic eutectic boronizing is used in treating the surface of 45 steel mould to improve the wear resistance of the mould surface. The influence of rare earth addition on microstructure

thickness

hardness gradient and wear resistance of the eutectic boride layer is studied. The action of activity and catalysis of the rare earth and the wear mechanism of the eutectic boride layer are analyzed. The results show that the microstructure of eutectic boride layer consists of boride and γ-Fe. When the addition of rare earth is 9%

the best effect of eutectic boronizing is achieved

in the sense that the thickness of eutectic boride layer is 1 times thinker than the boride layer obtained by the traditional solid boronizing

the hardness of the boride layer increases remarkably and the hardness gradient decreases. The rare earth has the action of activity and catalysis

promotes formation of hard phase

and effectively fines the microstructure of eutectic boronizing layer. The rare earth catalytic eutectic boronizing improves the wear resistance of boride layer by 18% and increases wear distance 12 times

compared with the traditional solid boronizing. The micro-cutting is the main wear mechanisms. Increasing the thickness of eutectic boride layer

improving the hardness

and decreasing the hardness gradient are the main factors to increase material wear resistance.

关键词

Keywords

references

高玉魁. 模具的表面改性工艺技术[J]. 金属加工: 热加工, 2010(3): 24-27.

GAO Yukui. Surface modification technology of mold[J]. Metalworking, 2010(3): 24-27.

徐润翔, 施雯, 陈智勇. Mo含量对Cr12MoV钢表面CrMoN涂层磨损性能的影响[J]. 上海金属, 2009, 31(3): 20-25.

XU Runxiang, SHI Wen, CHEN Zhiyong. Study on surface and wear properties of CrMoN coatings with different Mo content[J]. Shanghai Metals, 2009, 31(3): 20-25.

丁洋. 铝型材挤压模具早期磨损失效分析及研究[D]. 南宁: 广西大学, 2010.

李大鑫, 张秀棉. 模具技术现状与发展趋势综述[J]. 模具制造, 2005(2): 1-4.

LI Daxin, ZHANG Xiumian. The present situation and trend of development of mould technology[J]. Die and Mould Manufacture, 2005(2): 1-4.

谢飞, 叶雪梅, 程健, 等. 工模具钢的一种节能高效表面渗硼技术[J]. 常州大学学报: 自然科学版, 2012, 24(2): 1-5.

XIE Fei, YE Xuemei, CHENG Jian, et al. Energy-saving and highly-efficienct pack boriding technology for tool mould steels[J]. Journal of Changzhou University: Natural Science Edition, 2012, 24(2): 1-5.

邢志松, 王宝平. 渗硼工艺试验及应用[J]. 金属热处理, 2013, 38(8): 99-102.

XING Zhisong, WANG Baoping. Boronizing test and its application[J]. Heat Treatment of Metals, 2013, 38(8): 99-102.

XIE Fei, SUN Li, PAN Jianwei. Characteristics and mechanisms of accelerating pack boriding by direct current field at low and moderate temperatures[J]. Surface and Coatings Technology, 2012, 206(11/12): 2839-2844.

史月丽, 葛长路, 王温银. 盐浴共晶化渗硼的研究[C]∥第八次全国热处理大会论文集. 北京: 中国工程机械学会, 2003: 277-280.

GE C L, YE R C. Research on self-propagating eutectic boriding[J]. Journal of Materials Processing Technology, 2002, 124(1/2): 14-18.

OLIVEIRA C K N, CASTALETTI L C, LOMBARDI N A, et a1. Production and characterization of boride layers on AISI D2 tool steel[J]. Vacuum, 2010, 84: 792-796.

郝少祥, 王宇平, 陈静. 稀土对Cr12MoV钢渗硼层组织和性能的影响[J]. 河南科学, 2006, 24(1): 20-22.

HAO Shaoxiang, WANG Yuping, CHEN Jing. Effect of rare earth on microstructure and properties of boronizing layer[J]. Henan Science, 2006, 24(1): 20-22.

李亚波, 王福明, 朱宝晶. 稀土元素在铁素体不锈钢中的作用和应用前景[J]. 特殊钢, 2008, 29(3): 39-41.

LI Yabo, WANG Fuming, ZHU Baojing. Application prospect and effect of rare earth elements in ferritic stainless steels[J]. Special Steel, 2008, 29(3): 39-41.

谢敬佩, 王文焱, 李继文, 等. 耐磨奥氏体锰钢[M]. 北京: 科学出版社, 2008: 105.

戴乐, 潘罗坤, 张永洋. 药芯焊丝形成WC增强铁基耐磨堆焊层研究[J]. 热加工工艺, 201l, 40(11): 35-39.

DAI Le, PAN Luokun, ZHANG Yongxiang. Study on WC reinforced iron matrix wear resistance surfacing layer manufactured by flux-cord wires[J]. Hot Working Technology, 2011, 40(11): 35-39.

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

碳/ 碳复合材料表面聚四氟乙烯复合涂层的摩擦学性能

性能可调的自润滑叠层复合材料的摩擦学行为研究

分形特征表面接触磨损模拟

齿间动态载荷分配下的齿轮磨损分析

工况周期波动下深海推进器密封摩擦副性能研究